• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.39-47
• /
• 2013

With the increase in the application of CLSM using coal ash, we performed a basic research on CLSM material, laying focus on the correlation between compressive strength and unit weight of lightweight foamed CLSM. The unconfined compression strength is a criterion for the judgment of the possibility of re-excavation and an important factor determining the economy, efficiency, and excavation character. However, to know the quantitative compression strength value takes a certain amount of time, because the applicability of unconfined compression strength of CLSM is judged by the standard of 28days. Therefore, in this study the relation between compressive strength and unit weight (foam slurry unit weight, apparent unit weight) is analyzed focusing on lightweight foamed CLSM. We also suggested a formula which can easily predict the 28-day compressive strength only using unit weight value without the need to cure the slurry for 28 days.

• The korean journal of orthodontics
• /
• v.16 no.2
• /
• pp.53-67
• /
• 1986

The physical tooth movement by orthodontic force is based upon alveolar bone resorption at compression site and new bone formation at tension site of the alveolar socket. The function of the cyclic AMP is to participate not only in initial action of bone cells by mechanical forces but also in the continuous cellular response leading to bone remodelling. This experiment was performed to clarify the role of cyclic AMP in bone remodelling by mechanical force in the NORMAL group, the DIABETES group and the INSULIN TREATED group. The 72 rats were divided into the NORMAL group, the DIABETES group and the INSULIN TREATED group. The same orthodontic forces were applied to the rats of 3 groups. These rats were treated for periods of time ranging from 1 hour, 1 day, 7 days, 14 days, 21 days and 28 days. The samples of alveolar bones were obtained from compression and tension sites surrounding the tipping teeth from NORMAL, DIABETE and INSULIN TREATED rats. The samples were assayed for cyclic AMP by the cyclic AMP RIA kit. The results were as follows: 1. The cyclic AMP levels of alveolar bone in compression and tension sites showed initial decrease, then increased and .remained elevated by the time consuming. 2. The highest cyclic AMP level showed in the DIABETES group and the lowest level was in the NORMAL group. 3. The cyclic AMP levels in the INSULIN TREATED group was similar with the NORMAL group in control and tension sites, but in the compression sites it was similar with the DIABETES group.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.3
• /
• pp.179-187
• /
• 2000

Fractal theory has strengths such as high compression rate and fast decoding time in application to image compression, but it suffers from long comparison time necessary for finding an optimally similar domain block in the encoding stage. This paper proposes a neural network based block classifier which enhances the encoding time significantly by classifying domain blocks into 4 patterns and searching only those blocks having the same pattern with the range block to be encoded. Size of a block is differently determined depending on the image complexity of the block. The proposed algorithm has been tested with three different images having various featrues. The experimental results have shown that the proposed algorithm enhances the compression time by 40% on average compared to the conventional fractal encoding algorithms, while maintaining allowable image qualify of PSNR 30 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1155-1166
• /
• 2016

In this paper, we propose a new embedded video compression scheme which uses three-dimensional rate-distortion optimization based block coder. After the proposed scheme removes temporal redundancy by applying the motion compensated temporal filtering(MCTF) on input video frames, two dimensional discrete wavelet transform is applied on video frames to remove spatial redundancy. The three-dimensional wavelet coefficients generated in this way are sorted according to their expected rate-distortion slope and encoded by using the three-dimensional block partition coding method. The proposed scheme also uses both the effective color video coding method which maintains embedded features, and the efficient bit-rate control method. Experimental results demonstrate that the proposed scheme not only produces embedded bit-streams, but also outperforms existing video compression schemes.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.402-410
• /
• 1997

Developing a salt core for squeeze casting process, two different salt cores(pure salt core and mixed salt core) were fabricated and investigated. Pure salt core was composed of 100% NaCl and mixed salt core was made by mixtures of NaCl with MgO(1%), $Na_2B_4O_7$(2%), and talc(1%) as a binder or a strengthening agent. Salt cores were compacted to various theoretical density, heat treated, and then squeeze-cast with molten Al alloy(AC8A). The compression strength of salt cores were measured and the squeeze-cast products were examined for shape retention, infiltration of molten metal into the cores, and microstructures. The shape of salt core compacted at above 75% of the theoretical density was maintained stably. The higher theoretical density of salt cores gave higher compression strength, and the compression strength of mixed salt core was higher than that of pure salt core. Namely at 90% theoretical density, the compression strength of mixed salt core was $6.3 kg/mm^2$, compared to $4.6 kgmm^2$ for pure salt core. At a squeeze casting pressure of $1000 kg/cm^2$, molten Al alloy was infiltrated into pure salt core of under 85% of the theoretical density. At squeeze casting pressure of $1000 kg/cm^2$, only mixed salt core above 90% of the theoretical density were valid, but the shape of the core was altered in the case of pure salt core at 90% of theoretical density. A key factor for developing a salt core for squeeze casting process was estimated as the ultimate compressive strength of salt core.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1104-1114
• /
• 2007

Digital video compression technique has played an important role that enables efficient transmission and storage of multimedia data where bandwidth and storage space are limited. The new video coding standard, H.264/AVC, developed by Joint Video Team(JVT) significantly outperforms previous standards in compression performance. Especially, variable length code(VLC) plays a crucial pun in video and image compression applications. H.264/AVC standard adopted Context-based Adaptive Variable Length Coding(CAVLC) as the entropy coding method. CAVLC of H.264/AVC requires a large number of the memory accesses. This is a serious problem for applications such as DMB and video phone service because of the considerable amount of power that is consumed in accessing the memory. In order to overcome this problem in this paper, we propose a variable length technique that implements memory-free coeff_token, level, and run_before decoding based on arithmetic operations and using only 70% of the required memory at total_zero variable length decoding.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.1-9
• /
• 2020

In this paper, we propose Dynamic Rank Subsetting (DRAS) technique that enhances the energy-efficiency and the performance of memory system through the data compression. The goal of this technique is to enable a partial chip access by storing data in a compressed format within a subset of DRAM chips. To this end, a memory rank is dynamically configured to two independent sub-ranks. When writing a data block, it is compressed with a data compression algorithm and stored in one of the two sub-ranks. To service a memory request for the compressed data, only a sub-rank is accessed, whereas, for a memory request for the uncompressed data, two sub-ranks are accessed as done in the conventional memory systems. Since DRAS technique requires minimal hardware modification, it can be used in the conventional memory systems with low hardware overheads. Through experimental evaluation with a memory simulator, we show that the proposed technique improves the performance of the memory system by 12% on average and reduces the power consumption of memory system by 24% on average.

• Journal of Software Engineering Society
• /
• v.26 no.1
• /
• pp.1-16
• /
• 2013

Variable length information message is a communication protocol standard in order for computer network systems to provide efficient delivery of information. The variable length information messages were developed for varying and controlling details of information in accordance with message receiver's required information level or information access level. In the previous studies, data compressing techniques have been in use for information message optimization technologies in order to reduce physical sizes of information messages. In optimization technologies for information messages, accuracy of information is considered as the most important factor; therefore, only non-loss compression techniques are applied to the optimization technologies. However, the non-loss compression based information message optimization methods are not efficient in data compression, and these are limited to efficient delivery of information in wireless network environments that have constraint bandwidth. In this paper, we attempt to optimize information in the variable length information messages at message fields in order to reduce physical sizes of messages more efficiently. To demonstrate the efficiency of our approach, we conduct optimization experiments for variable length information messages.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.42-52
• /
• 1990

In this study, thick 24mm glulams were composed of thick. 3, 4, 6, 8mm Larch laminas to study that the theoretical analysis and the experimental analysis regarding the location of neutral axis of the glulams were compared, and to study on the effect of location of neutral axis on mechanical properties of glulam. The variation of location of neutral axis after proportional limit(or elastical limit) was studied to offer basic data to make the better composition method of glulam. The result obtained can be summarized as follows: 1. The theoretical neutral axis was 0.547 in solid wood, and also 0.547 in glulams because glulams were composed of only Larch laminas. 2. In solid wood, the deviation of the theoretical and the experimental neutral axis location was 0.1%, But in glulams, the deviation from-12.2% to + 7.8% showed nonuniform pattern but no large deviation. Because laminas was only of Larch and so the mechanical properties of laminas were monotonous. 3. The neutral axis exerted no influance on the elasticity of glulam, which meaned that the maximum shear strength in the neutral axis showed no influance on elasticity limit. 4. The only minutely lower elasticities of glulam than that of solid wood were shown. This was because of influance of glue lines of glulam on the elasticlties. 5. The failure type of glulam was wholly simple tension failure and the horizontal shear failure near neutral axis was not taken place, which was that glue line was complete in bonding and the strength of the lamina was not various but uniform. 6. The ratio of tension strain($^{\varepsilon}t$) I compression strain($^{\varepsilon}c$) initially showed uniform level After the elasticity limit. the ratio was increased with the flow of time and so the tension strain was more increased than compression strain. So this proved tension lamination technique, which is that the mechanical properties of glulam could be improved, if the lamina of more superior strength would he added on the bottom side of the glulam.

• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.104-111
• /
• 2014

The purpose of this study is to investigate the CPR within ambulance. The Subjects were 890 emergency medical technicians in fire department in Gyeonggido. After continuing education program, the emergency medical technicians completed the questionnaires from January to February, 2012. Questionnaire consisted of demographic characteristics, method of chest compression (one handed or two handed), chest compression - ventilation ratio, and hands only CPR. Data were analyzed by frequency analysis and Chi-square test, t-test. One-way analysis of variance (ANOVA) was followed by Scheffe post-hoc test to analyze changes in all parameters between all groups. One handed chest compression accounted for 14.0% and two handed chest compression accounted for 86.0%. Hands only CPR accounted for 71.7% and standard CPR (30:2) accounted for 28.3%. In order to perform the high quality CPR, as least three persons must be dispatched in the ambulance. The flexible management of manpower may improve the survival from the cardiac arrest. A systemic approach for educating and training EMT's in CPR is needed.