• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.385-400
• /
• 2017

This paper presents an experimental study on the behavior of axially-loaded steel RHS (rectangular hollow section) compression members that are partially reinforced along their lengths with welded steel plates. 28 slender column tests were carried out to investigate the effects of the slenderness ratio of the unreinforced member and the ratio of the reinforced length of the member to its entire length. In addition to the slender column tests, 14 stub-column tests were conducted to determine the basic mechanical properties of the test specimens under uniform compression. Test results show that both the compressive strength and stiffness of an RHS member can be increased significantly compared to its unreinforced counterpart even when only the central quarter of the member is reinforced. Based on the limited test data, it can be concluded that partial reinforcement is, in general, more effective in members with larger slenderness ratios. A simple design expression is also proposed to predict the compressive strength of RHS columns partially reinforced along their length with welded steel plates by modifying the provisions of AISC 360-10 to account for the partial reinforcement.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.53-58
• /
• 2001

Constructions on the soft clay layer of low strength and high compression bring out many problems. Recent studies show that strength of the soft clay layer could be substantially improved by mixing quicklime. For the purpose, a series of uniaxial compression tests were performed, using quicklime, in order to analyze strength characteristics. The major test results are summarized following : When water content is 90%, the strength is observed to precipitously increase between 3～14 days, then, the extent slowly increase in relative terms. When water content is 130%, the strength is observed to precipitously increase up to 28 days. When the strength of water content 90% is compared to that of water content 130%, the initial strength of the former is higher than that of the latter. The analyses show that the improvement of soft clay layers can be realized by the mixture of both quicklime and sand, and by the mixture of quicklime only.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.998-1003
• /
• 2008

It has been recognized unsaturated soil behaviour playing an important role in geomechanics. Up to now, only a few experimental data are available for the technical difficulties related to both volume changes and suction measurements. In this study, the volume changes of unsaturated compacted silty soil were monitored with proximeter (i.e. non-contactable transducer) during various triaxial compression tests, which gave a realistic estimation in the volume changes of unsaturated soil sample. Various triaxial compression tests for unsaturated soil under different drainage conditions are carried out. The behaviour of the pore pressure, namely, the pore-air pressure and the pore-water pressure, and matric suction during the shearing tests are investigated. The experimental results have revealed that the mechanical behaviour of unsaturated soil can be significantly affected by the matric suction.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.864-867
• /
• 2002

Introduction of digital communication network such as Integrated Services Digital Networks(ISDN) and digital storage media have rapidly developed. Due to a large amount of image data, compression is the key techniques in still image and video using digital signal processing for transmitting and storing. Digital image compression provides solutions for various image applications that represent digital image requiring a large amount of data. in this paper, the proposed DWT(Discrete Wavelet Transform) filter bank is consisted of simple architecture, but it is efficiently designed that a user obtains a wanted compression rate as only input parameter. If it is implemented by FPGA chip, the designed encoder operates in 12MHz.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.56-63
• /
• 2001

The dynamic behavior of rotor-bearing system used in swash plate compressor has been investigated using the combined methodologies of finite elements and transfer matrices. The finite element is formulated including the field element for a shaft section and the point element for swash plate, disk pulley and bearings. The Houbolt method is used to consider the time march for the integration of the system equations. The transient whirl response of rotating shaft supported on roller bearings is obtained, considering compression forces and unbalance forces at swash plate and driving pulley. And, the steady state displacements of the rotor are compared with a variation in unbalance mass. Results show that the loci of rotating shaft considering unbalance forces and external compression forces are more severe in flutter motion than with only unbalance forces.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1410-1419
• /
• 1989

In this paper, we present a new synthetic high coding method which gives high image compression ratio. Given an image, only its low-pass component is transmitted by DCT coding` the high-pass component is not transmitted but synthesized using edge sharpening on the reconstructed low-pass image at the receiver. For the DCT coding which is used to encode the low-pass image, we used an improved version of Cox's variance estimator. Also, introduced are new image quality measures called GSNR and EPR which emphasize perceptual aspects of image quality. Experimental results show that the performance of the proposed synthetic high coding is better in various quality measures than that of Cox's adaptive transform coding. Also, it yields acceptable image quality with neither apparent block effect nor visible granular noise even at high compression ratio of about 30:1.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2287-2290
• /
• 2003

In this paper, an image vector quantization method is proposed not only to improve the compression ratio but also to reduce the computation cost. The proposed method could save the computation cost of codebook generation and encoding by using the modified LBG algorithm of Partial Search Partial Distortion (PSPD) in wavelet domain, by which the code book was constructed together with the partial codebook search, the partial code vector elements, and the interruption criterion. We have designed and implemented the vector quantizer to verify the improvement in reducing compression ratio in encoding processing and reducing the computation cost.

• Korean Journal of Veterinary Research
• /
• v.56 no.2
• /
• pp.113-116
• /
• 2016

Our retrospective study reports the clinical findings and population characteristics of 81 surgically treated dogs for spinal cord compression. We compared the outcome of dogs with different grades of neurological dysfunction due to spinal cord compression and focused on the long-term outcome of surgical treatment, for which there are only a few recent records. We recorded a 13.6% recurrence, regardless of the degree of dysfunction. However, the degree of dysfunction negatively affected the recovery length.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.209-211
• /
• 2015

Evaporation characteristics of a single droplet of carbon nanofluids were investigated in a rapid compression machine(RCM). n-Heptane and carbon black N990 were used to synthesize the carbon nanofluids. RCM is an experimental set-up to simulate a single compression stroke of reciprocating engine. Temperature and pressure in a reaction chamber were measured during the compression stroke. After the piston reaches top dead center(TDC), temperature and pressure decreased due to the heat loss at wall. In that process, a single droplet of carbon nanofluids underwent unsteady condition. A single droplet was put at the center of reaction chamber. Thermocouple whose tip is $50{\mu}m$ was used not only to measure transient bulk temperature, but also to suspend the droplet. The picture of single droplet was taken using high speed camera with a frame rate of 500 fps. From those pictures, the droplet diameter was measured by visual basic program.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.1
• /
• pp.16-20
• /
• 2001

In order to optimize designing process of corrugated fiberboard boxes for agricultural products, first of all, compression strength of each liner were experimentally evaluated on the various conditions of relative humidity and analyzed by liner regression analysis. At the 66 percents of relative humidity, IK(imported kraft liner) liner board lost little of its compression strength compared to others. At the relative humidity 93 percents, KA liner board lost its compression strength only 40 percents while SK liner board lost up to 56 percents. From the result of prediction modeling of ring crush strength in various humidity conditions, R square values were ranged from 0.59 to 0.97. At 56 percents of RH or below, R square values were relatively low, but at 66 percents of RH or higher, the values were 0.85 or higher. The significance values were lower than 0.001 at every RH condition. Level of significance of experimented values was about 80 percents of predicted values and R square values were between 0.89 to 0.95.