• 대한정형외과 초음파학회지
• /
• 제1권2호
• /
• pp.128-133
• /
• 2008

신경 압박의 원인은 외부로부터 가해지는 것도 있고, 신체 내부 병리가 발생하여 신경 주행에 따라 발생할 수 있다. 주관절 이하부에서 압박성 신경병증으로 정중 신경, 척골 신경, 요골신경병증이 있다. 정중 신경은 굴곡 지대부위에서 수근관 증후군이 대표적이며, 모든 신경 포착 증후군 가운데 가장 흔하다. 그 외 주관절 부위에서 스트러더스 인대, 상완 이두근 건막, 회내근, 천수지 굴근 기시부 그리고 비정상 근육들에 의한 회내근 증후군과 전 골간 신경 증후군이 있다. 척골 신경은 스트러더스 궁, 내측 상과 후방의 주관, 척수근 굴근 두 기시부 사이의 건막 등에서 눌리는 주관 증후군과, 수근부에서 결절종, 유구골 갈고리 골절 그리고 혈관성으로 오는 척골 관 증후군이 있다. 요골 신경의 심부 분지가 회외근속을 지나면서 만들어지는 부위에서 눌리는 경우 요골 관 증후군이라고 한다. 치료는 초기에는 소염제나 야간부목, 스테로이드 주사와 같은 보존적 치료를 시행할 수 있으며, 이에 호전되지 않을 경우 전기적 검사나 영상 검사에서 이상이 나타나면 수술적 감압술을 시행하여야 한다.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.243-252
• /
• 1999

The damage caused in the processes and distributions after harvesting the fruits and vegetables is attributed to the mechanical factors such as compressive and impact forces. Compression tests of biological materials provide an objective method for determining the apparent modulus of elasticity and mechanical properties which are significant in quality evaluation and control, and them maximum allowable compressive forces for minimizing mechanical damage. This study was performed to determine the mechanical properties of apple and pear, and to investigate effect of specimen shapes on the mechanical properties of them. A computer program was developed for measuring the mechanical properties and analyzing the data obtained from the measurement. Compression tests on the sample were performed with then replications at each treatment and at 25 mm/min loading rate. Mechanical properties of the apple was generally shown the higher value than those of the pear, and it was though that data obtained form the cylindrical specimen removed from the sample was more reliable than from the specimen cut in half.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.54-61
• /
• 2012

This study surveyed the preparation of 8oz coated fabric and the physical property of the coated fabric according to the treated condition for the sail yacht. And the coated fabrics were compared with the performance of overseas products for verification. Physical properties of the coated fabric treated with non-yellowing functional polyurethane resin were examined according to the treatment condition such as compression and ageing treatments. Finally, yellowing fastness to light for 60 hours was assessed. Considering the compression condition after coating, good physical property was obtained at $6kgf/cm^2$. Also, the performance of yellowing fastness was similar to performance of overseas goods.

• 유기물자원화
• /
• 제24권2호
• /
• pp.67-74
• /
• 2016

본 연구는 고체연료 가공원료로 사용할 우분을 압착하는 방식을 적용하여 수분을 감소시킨 뒤에 성형가공한 우분 고체연료의 특성을 분석하기 위하여 수행되었다. 우분을 압착 처리함에 따라 VS/TS 비율 (총 고형물중 휘발성 고형물 비율)과 수분감소 효과가 높아졌다. 젖소 분의 경우 압착처리에 의해 제거되는 수분의 양은 무게를 기준으로 하여 투입분뇨의 21~26% 수준에 해당하였다. 압착에 의해 분리된 침출수의 비중은 약 1.01이었다. 한우 분의 경우에는 수분 제거량이 약 15~20%(w/w) 수준이었고 이때 발생한 탈리액의 비중은 0.99 수준이었다. 탈수된 우분은 고체연료 가공방법 적용에 의해 쉽게 구(공) 모양의 형태로 가공되었다. 가공된 구 모양의 고체연료를 건조하였을 경우 건조효율은 직경이 작은 경우에 그 효율이 더 높게 나타났다. 고체연료로서의 열량 값은 직경 10~15mm 크기로 가공한 고체연료가 본 시험에서 가공된 다른 크기의 직경을 가진 고체연료보다 상대적으로 더 높은 것으로 분석되었다. 이 결과는 섬유질이 많은 우분의 특성상 10~15mm 크기의 가공품에 섬유소가 잘 부착되기 때문인 것으로 판단된다.

• Journal of Acupuncture Research
• /
• 제29권1호
• /
• pp.159-167
• /
• 2012

Objectives : The purpose of this study is to investigate the effecacy of Korean medical treatments on cervical myelopathy patient diagnosed by magnetic resonance imaging(MRI). Methods : The patient was treated by Korean medical treatments including acupunture, pharmacopuncture, herbal medicine, cervical traction technique of Chuna treatment. To evaluate the change of MRI view, slipped disc ratio and A-P compression ratio were used. The improvement of the clinical symptoms was observed by Score of pain part and Nurick grade. Results : After treatment, patient's score of pain part, Nurick grade were decreased and slipped disc ratio, A-P compression ratio were also improved. Conclusions : The Korean medical treatments might be an effective method to improve the clinical symptoms and radiological view of cervical myelopathy.

• Geomechanics and Engineering
• /
• 제22권4호
• /
• pp.329-337
• /
• 2020

Polyacrylamide (PAM) possesses high water absorption capacity and a unique pH-dependent behavior that confer large potential to enhance the engineering performance of clays. In this study, calcium bentonite was treated with a nonionic PAM. Flexible-wall permeability test and the consolidation test were performed at different pH values to evaluate the effects of PAM treatment on the hydraulic and consolidation properties. Test results demonstrate that index properties are affected by the adsorbed PAM on clay surface: a decrease in specific gravity, a decrease in net zeta potential, and an increase in liquid limit are observed due to the PAM treatment. At a given pH, the compressibility of the treated clay is greater than that of the untreated clay. However, the compression indices of untreated and treated clays can be expressed as a single function of the initial void ratio, regardless of pH. Hydraulic conductivity is reduced by PAM treatment about 5 times at both neutral and alkaline pH conditions under similar void ratios, because of the reduction in size of the water flow channel by PAM expansion. However, at acidic pH, the hydraulic conductivity of the treated clay is slightly higher than the untreated clay. This reflects that the treated bentonite with PAM can be beneficially used in barrier system for highly alkaline residues.

• 열처리공학회지
• /
• 제30권5호
• /
• pp.187-196
• /
• 2017

High temperature flow behaviors of AISI 4340 steel were investigated using isothermal compression tests under the temperature range from 850 to $1100^{\circ}C$ and a strain rate from 0.01 to $10s^{-1}$. The flow stress decreased with increasing compression temperature and decreasing strain rate. The dynamic softening related to the dynamic recrystallization was observed during hot deformation. The constitutive model based on Arrheniustyped equation with the Zener-Hollomon parameter was used to simulate the hot deformation behavior of AISI 4340 steel. The modification of the Zener-Hollomon parameter and lnA parameter resulted in the improvement of the calculation accuracy of the proposed constitutive model compared with the experimental flow curves. In addition, the process map of AISI 4340 steel was proposed. The instable process condition for hot deformation was predicted and its reliability was verified with the experimental observation.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.457-466
• /
• 2009

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The results were as follows. Specific gravities of green woods were in range from 0.90 to 1.10. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were $176.4N/mm^2{\sim}102.8N/mm^2$ and $100.1N/mm^2{\sim}61.2N/mm^2$ respectively. MORs of heat treated woods showed lower than those of never treated woods. There was no significant change in the modulus of elasticity (MOE) before and after heat treatment.

• 척추신경추나의학회지
• /
• 제4권2호
• /
• pp.149-161
• /
• 2009

Objective : The purpose of this study is to report the improvement after the acupuncture therapy and herbal medicine about a patient who has latrogenic Cushing with steroid induced myopathy and compression fracture of L-spine. Methods : We treated the patient with Neutral Blood Stasis herbal acupuncture, acupuncture therapy and herbal medication. Results : We have experienced one case of latrogenic Cushing syndrome with steroid induced myopathy and compression fracture of L-spine. This case improved significantly through acupuncture and herbal medication treatment. Conclusions : This study suggests manual acupuncture therapy and herbal medication is effective for the improvement of latrogenic Cushing syndrome with steroid induced myopathy and compression fracture of L-spine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.321-324
• /
• 2008

본 논문은 CFRP 긴장재를 정착시키기 위해 압착형 정착방식을 적용하였다. 예비실험을 통하여 압착형 정착구의 정착 가능성(정착성능 최대 83%)을 확인하였고, 압착방식의 정착구 개발을 위해 슬리브 제원, 인서트 유무 등의 다양한 변수에 대해 실험연구를 수행하였다. 본 연구는 압착형 슬리브 내부 및 인서트 형상을 변화시켜 이러한 변수가 정착성능에 미치는 영향을 고찰하였다. 실험결과, 슬리브 길이가 증가하면 최대하중도 18${\sim}$22% 증가하는 것으로 나타났고, 옥사이드 표면처리보다 슬리브 길이의 증가가 강도 향상에 유리한 것으로 판단된다. 알루미늄 인서트를 적용한 경우도 마찬가지로 정착성능은 인서트 형상 변화보다 슬리브 길이의 영향을 받는 것으로 나타났다.