• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.805-815
• /
• 2003

In this paper, we present the development of document compression codec using segmentation, wavelet lifting and bitplane coding. We use the segmentation to preserve the text appearance. We performed integer-to-integer wavelet lifting and also performed bitplane subblock coding for document compression. We acquired a high compression ratio and an efficient compression by encoding only the significant subblocks in the bitplane subblock coding. We also implemented scalar quantization by subband-oriented bit shifting. The system performs color conversion and downsampling before wavelet lifting and also performs graycode conversion and quantization before subblock coding. In the experiment, we show the performances of the system by presenting the high compression ratios and high PSNR values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.764-768
• /
• 2002

In this paper, a double balanced gilbert cell MMIC mixer was realized in Tachyonics SiGe HBT technology. The fabricated mixer has 17 dB conversion gain, 9.8 dB noise figure, -4.2 dBm output 1 dB compression point, -27 dBc RF to IF isolation, and the good input, output matching characteristics. It draws 10 mA from a 3 V supply. The simulation and the measured results are closer to each other, which confirms accuracy of the model library and reliability of the process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.863-864
• /
• 2005

In recent years, we use overdriving scheme to improve the response time of the liquid crystal. Since conventional overdriving scheme uses memory to perform ideal processing, it is desired to reduce system cost by decreasing the data stored in these SDRAMs. As a general compression method, quantization, sub-sampling and Block Truncation Coding ( BTC ) are used, which process data in block base and cause block effect. So we proposed new data compression method by color space conversion. Because this method compresses luminance and chrominance signal by different ratio, it can efficiently reduce error of block effect in decompression image.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.311-312
• /
• 2012

Homogeneous charge compression ignition combustion with multiple-injection strategy using dimethyl-ether was investigated in a single cylinder direct-injection compression-ignition engine. The combustion performance and exhaust emissions were tested by varying the post injection conditions. The experiments were carried out under low load and low speed conditions. By the late post injection near the top dead center, the combustion phase was retarded and lengthened, and the fuel conversion efficiencies improved without the drawbacks of exhaust emissions increment.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.365-368
• /
• 2000

This paper describes image-rejection down conversion mixer for bluetooth application using 0.35u CMOS process. the proposed architecture is composed of LO phase shifter, mixer core, IF buffer, and IF phase shifter. IF phase shifter is designed using polyphase fillet. Simulation results show conversion gain = l0㏈, input 1㏈ compression point = -15.7㏈m. input third-order intercept point(IIP3) = -4.4㏈m, and image-rejection ratio = 37.8㏈, respectively, at 3V supply voltage, and 15.7㎃ current.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1178-1183
• /
• 2004

The purpose of this study was to investigate the influence of compression ratio on engine performance in a LPG(Liquefied Petroleum Gas) engine converted from a diesel engine. In ordor to determine the ideal compression ratio, a variable compression ratio 4-cylinder engine was developed. Retrofitting a diesel engine into a LPG engine is technically very complicated compared to a gasoline to LPG conversion. The cylinder head and the piston crown were modified to bum LPG in the engine. Compression ratios were increased from 8 to 10 in an increment of 0.5, the ignition timing was controlled to be at MBT(Minimum Spark Advance for Best Torque) for each case.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.93-100
• /
• 2009

Intake/exhaust valve timing and exhaust cam lift were changed to control the internal exhaust gas recirculation (IEGR) and combustion phase of homogeneous charge compression ignition (HCCI) engine. To measure the IEGR rate, in-cylinder gas was sampled during from intake valve close to before ignition start. The lower exhaust cam made shorter valve event than higher exhaust cam and made IEGR increase because of trapping the exhaust gas. IEGR rate was more affected by exhaust valve timing than intake valve timing and increased as exhaust valve timing advanced. In-cylinder pressure was increased near top dead center due to early close of exhaust valve. Ignition timing was more affected by intake valve timing than exhaust valve timing in case of exhaust valve lift 8.4 mm, while ignition timing was affected by both intake and exhaust valve timing in case of exhaust valve 2.5 mm. Burn duration with exhaust valve lift 2.5 mm was longer than other case due to higher IEGR rate. The fuel conversion efficiency with higher exhaust valve lift was higher than that with lower exhaust valve lift. The late exhaust and intake maximum open point (MOP) made the fuel conversion efficiency improve.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.1-7
• /
• 2003

The phase transformation from cellulose I into cellulose II in woods by way of Na-cellulose I was examined by x-ray diffraction analysis.The formation of Na-cellulose I in woods increased with the increase of treating time in alkali solution. When compression wood was treated with 20% NaOH solution at room temperature for 1 day, the x-ray diagram showed only Na-cellulose I. On the other hand, the x-ray diagram of tension wood showed a mixture of cellulose I and Na-cellulose I. Cellulose I of tension wood could not be transformed completely into Na-cellulose I even after 10-day treatment, but was transformed into Na-cellulose I after 30-day treatment. Na-cellulose I of compression and tension woods was converted to the cellulose I pattern and the mixture of cellulose I and cellulose II, respectively, after washing with water and drying at 20℃. Cellulose I regenerated from Na-cellulose I in wood could not be converted to cellulose II by delignification. Thus, it revealed that the delignification of the alkali-treated wood did not affect their cellulose structures. From the results, therefore, it can be concluded that lignin in woods prevents the formation of the stable Na-cellulose I and the conversion from cellulose I to cellulose II. This means that the conversion of chain polarity of wood cellulose hardly occurs during mercerization because cellulose microfibrils are fixed by lignin which not to be intermingled.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• Journal of Korea Multimedia Society
• /
• v.21 no.11
• /
• pp.1279-1287
• /
• 2018

In this paper, a new type of color coordinate conversion is proposed as modified CIEXYZ from RGB to compress the color gamut. The proposed segmentation includes principal component analysis for the optimal projection of a feature vector into a one-dimensional feature. The final step adopted for lip segmentation is Otsu's threshold for a two-class problem. The performance of the proposed method was better than that of conventional methods, especially for the chromatic feature.