• 소성∙가공
• /
• 제22권2호
• /
• pp.67-73
• /
• 2013

The deformation characteristics and microstructure changes in a round copper pipe under biaxial compression was studied using a horizontal compression die. The change of material properties, punch load and deformation behavior were monitored using various compressive deformation rates in the range of 0.5mm/min.~450mm/min. The strains, either tensile or compressive, were estimated from Vickers microhardness test results. The punch load and deformation characteristics of the round copper pipes were found to change greatly at a deformation rate of about 200mm/min. The punch load decreased with increasing compressive deformation rate. The results of numerical simulations agreed well with what was expected from the final microstructure and the hardness profile estimated from the final deformation strains.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.81-87
• /
• 1988

This paper proposes a new EBTC(extended block truncation coding) algorithm extended from the BTC for image compression. The EBTC has a capability to eliminate the defects of BTC, such as the deterioration of resolution or blocky effect,and to make a real-time processing like BTC. It shows better performances than the DPCM and the transform coding. Especially, it is a suitable coding method for the high quality picture transmission. It may be adequate to the system of transmission rate of 30-50 Mbits/sec. The picture quality has been scarecely degraded with a vector quantization to the EBTC output at the bit rate of 1.25 bits/pel. The bit rate of the scalar quantized EBTC method is 2.6-3.7 bits/pel.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.217-221
• /
• 2005

이동통신 기기로부터 복사되는 전자파가 인체에 흡수되는 에너지의 양은 모의 인체 내에서 전자파 비흡수율 [SAR(Specific Absorption Rate)]로 평가된다. RF 센싱 프로브의 Schottky 다이오드에 검출된 DC 전압은 높은 레벨에서 자승법칙(Square Law) 영역을 벗어나 선형성을 나타낸다. Square Law Region을 벗어난 직선 영역의 검파는 적절한 DCP(Diode Compression Point) 값으로 검 파된 전압을 보상하여야 한다. 적절한 보상에 의한 한 점에서의 SAR 값은 200 W/kg까지 측정할 수 있다.

• 산업기술연구
• /
• 제15권
• /
• pp.93-101
• /
• 1995

Fractal coding is a promising method for image compression, but it has not lived up to its promise as low bit-rate image compression scheme. The existing algorithms for finding self-mapping contractive transforms are computationally expensive and offer a poor rate-quality tradeoff. In this paper, we propose a segment based fractal coding. We classify the range blocks into shade, midrange or edge blocks, and segment edge block along the edge. And we apply midrange coding scheme for each segment. Our experiments show that our method gives better rate-qualty trade of than current fractal block coding methods.

• 한국연초학회지
• /
• 제7권2호
• /
• pp.189-197
• /
• 1985

The purpose of this study is to improve the method and the apparatus for recovering freon-11 used in a process for increasing the filling capacity of tobacco. The first, the theoretical recovery rate of freon-11 was calculated from vapour pressure and thermodynamic properties of freon-11. The second, the usability of theoretical data was evaluated by the comparison between the theoretical data and the experimental data from the pilot plant. The result obtained under the present experiment condition was quite similar to the rate at 15kg/cm2 and 5$^{\circ}C$, but the theoretical data evaluated were 0.1 to 0.3% lower than the experimental data at 20 to 25kg/cm2 and 5$^{\circ}C$. The recovery rate of the cooling and the compression system was about 95% with freon-11 used in this system and that with freon-11 concentrate of waste gas was about 3 to 3.6% at 20 to 25kg/cm2 and 5$^{\circ}C$.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.19-24
• /
• 2017

This paper is concerned with a test method that can be used to investigate the parameters of the Johnson-Cook constitutive model. These parameters are essential for accurately analyzing material behavior under impact loading conditions in numerical simulation. Ti-6Al-4V alloy (HCP crytal structure) was used as a specimen for the experiments. In the $10^{-3}-10^3/s$ strain rate range, three types of experimental methods (convention, compression and tension) were employed to compare the differences using MTS-810, SHPB and SHTB. Finite element analysis results when applying these parameters were displayed along with the experiment results.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.520-527
• /
• 2017

In this study, the experimental methods are compared for obtaining the parameters of the Johnson-Cook constitutive model. The parameters used for numerical simulation are very important in making an accurate estimation of numerical simulation. So, the testing method of obtaining the parameters is also very important. We compared the difference of conventional method, compression method and tensile method of AISI-4340 steel at various strain rate by using MTS, SHPB and SHTB. Taylor impact test and M&S were carried out to compare differences among these three types of JC constitutive parameter.

• Journal of Korean Neurosurgical Society
• /
• 제65권5호
• /
• pp.615-621
• /
• 2022

Various treatments for trigeminal neuralgia (TN) are known to yield initial satisfactory results; however, the surgical treatment has excellent long-term outcomes and a low recurrence rate. Surgical treatment addresses the challenge of vascular compression, which accounts for 85% of the causes of TN. As for surgical treatment for TN, microvascular decompression (MVD) has become the surgical treatment of choice after Peter J. Jannetta reported the results of MVD surgery in 1996. Since then, many studies have reported a success rate of over 90% for the initial surgical treatment. Most MVDs aim to separate (decompress) the culprit vessel from the trigeminal nerve. To increase the success rate of surgery, accurate indications for MVD and management of the offender vessels without complications are critical. In addition, if there is no vascular compression, partial sensory rhizotomy or internal neurolysis can be performed to improve surgical outcomes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.345-348
• /
• 2001

Nowadays, cast ingots has been used as preforms for forging to reduce the cost and the number of processes. In this study, the forging ability of Al cast alloys was investigated by using hot compression tests. Hot compression behavior of the cast Al alloys has been studied The flow stress increased by decreasing the compression temperature and by increasing the strain rate. In case of melt treatment the flow stress decreased comparing to untreated A356.0 Al alloy. Also, We developed the various forged lower control arm using the cast preform. The optimum design of product and cast preform was investigated After Prototyping of Al forged lower arm, durability and buckling test were performed.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.324-329
• /
• 2004

As a new concept in engines and a power source for future automotive applications, the HCCI(Homogeneous Charge Compression Ignition) engine has been introduced. Essentially a combination of spark ignition and compression ignition engines, the HCCI engine exhibits low NO$_x$ and PM emissions as well as high efficiency under part load. In this research, a 4 cylinder diesel engine was converted into a HCCI engine, and propane was used as the fuel. The main parameters for this research are fuel flow rate and the temperature of the intake manifold, and the effects of such on a HCCI engine's performance and exhaust was investigated.