• 전자공학회논문지CI
• /
• 제41권5호
• /
• pp.33-40
• /
• 2004

본 논문에서는 웨이블릿 압축을 이용하여 얼굴 데이터베이스를 구축하고, 주성분 분석(Principal Component Analysis : PCA) 알고리듬을 이용하여 얼굴 인식률을 비교한다. 일반적인 얼굴인식 방법은 정규화된 크기를 이용하여 데이터베이스를 구축하고, 얼굴 인식을 한다. 제안된 방법은 정규화된 크기(92×112)의 영상을 웨이블릿 압축으로 1단계, 2단계, 3단계로 변환하고 데이터베이스를 구축한다. 입력 영상도 웨이블릿으로 압축하고 PCA 알고리듬으로 얼굴인식 실험을 하였다 실험을 통하여 제안된 방법은 기존 얼굴영상의 정보를 축소할 뿐만 아니라 처리속도도 향상되었다. 또한 제안된 방법은 원본 영상이 99.05%, 1단계 99.05%, 2단계 98.93%, 3단계 98.54% 정도의 인식률을 보였으며, 대량의 얼굴 데이터베이스를 구축하여 얼굴인식을 하는데 가능함을 보였다.

• Journal of Pharmaceutical Investigation
• /
• 제24권3호
• /
• pp.139-144
• /
• 1994

The effect of some formulation variables on the release rate of famotidine, a $H_2$ receptor antagonist, from cellulose matrices containing hydroxypropylcellulose (HPC) in different ratios and types was investigated. The effects of tablet shape and compression pressure on dissolution rate of famotidine were studied. And the effect of the pH of dissolution media was also studied. Increase in the ratio of polymer to drug decreased the release rate of famotidine. Increase of the polymer viscosity also decreased the release rate. The release rate of famotidine was dependent on the pH of dissolution media. The release rate of drug was not much dependent on the compression pressure but dependent on the tablet shape and/or surface area. Consequently, the release rate of famotidine can be modified by changing the HPC contents, types of polymers with different viscosity grades or using appropriate fillers.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1451-1460
• /
• 2004

A two-stroke Schnurle-type gasoline engine was modified to enable compression-ignition in both the port fuel injection and the in-cylinder direct injection. Using the engine, examinations of compression-ignition operation and engine performance tests were carried out. The amount of the residual gas and the in-cylinder mixture conditions were controlled by varying the valve angle rate of the exhaust valve (VAR) and the injection timing for direct injection conditions. It was found that the direct injection system is superior to the port injection system in terms of exhaust gas emissions and thermal efficiency, and that almost the same operational region of compression-ignition at medium speeds and loads was attained. Some interesting combustion characteristics, such as a shorter combustion period in higher engine speed conditions, and factors for the onset of compression-ignition were also examined.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.193-195
• /
• 2009

In this paper, we propose an effective compression method for electrocardiogram(ECG) signals. 1-D ECG signals are reconstructed to 2-D ECG data by period and complexity sorting schemes with image compression techniques to Increase inter and intra-beat correlation. The proposed method added block division and mean-period normalization techniques on top of conventional 2-D data ECG compression methods. JPEG 2000 is chosen for compression of 2-D ECG data. Standard MIT-BIH arrhythmia database is used for evaluation and experiment. The results show that the proposed method outperforms compared to the most recent literature especially in case of high compression rate.

• The Korean Journal of Pain
• /
• 제18권2호
• /
• pp.142-145
• /
• 2005

Background: Vertebroplasty that is performed in the upper and middle thoracic spine presents technical challenges that are different from those in the lower thoracic or lumbar region due to the small pedicle size and angular severity for thoracic kyphosis. We report the results of percutaneous vertebroplasty and review its effectiveness in treating intractable osteoporotic compression fractures in the upper and middle thoracic spine. Methods: Patients who underwent vertebroplasty due to painful osteoporotic compression fractures at T3 T8 were retrospectively analyzed. The compression rate, volume of injected cement, clinical outcome (VAS score) and complications were analyzed. Results: Forty-three vertebral bodies from 41 patients (32 females and 9 males, age from 64 to 78 years old) underwent vertebroplasty. The mean compression rate improved from 35% to 17%. Bipedicular injections of bone cement were performed at 3 levels of 2 patients, and unipedicular injections were performed in 40 levels of 39 patients. The mean VAS score prior to surgery was 7.7, which improved to 2.4 within 48 hours after surgery, and the mean VAS score after 6 months was 1.5, which was significantly lower. All patients recovered uneventfully, and the neurological examination revealed no deficits. Cement leakage to the adjacent disc (9 levels) and paravertebral soft tissues (10 levels) developed. However, there were no significant complications related to the procedure such as a pneumothorax or pulmonary embolism. Conclusions: Transpedicular vertebroplasty is a safe and effective treatment for the upper and middle thoracic regions, and has a low complication rate.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.19-26
• /
• 2012

Recently the world has been suffering from difficulties related to the demand and supply of energy due to the democratic movements sweeping across the Middle East. Consequently, many have turned their attention to never-developed extreme regions such as the polar lands or deep sea, which contain many underground resources. This research investigated the strength and initial elastic modulus values of eternally frozen ground through a uniaxial compression test and indirect tensile test using frozen artificial soil specimens. To ensure accurate test results, a sandymud mixture of standard Jumunjin sand and kaolinite (20% in weight) was used for the specimens in these laboratory tests. Specimen were prepared by varying the water content ratio (7%, 15%, and 20%). Then, the variation in the strength value, depending on the water content, was observed. This research also established three kinds of environments under freezing temperatures of $-5^{\circ}C$, $-10^{\circ}C$, and $-15^{\circ}C$. Then, the variation in the strength value was observed, depending on the freezing environment. In addition, the tests divided the loading rate into 6 phases and observed the variation in the stress-strain ratio, depending on the loading rate. The test data showed that a lower freezing temperature resulted in a larger strength value. An increase in the ice content in the specimen with the increase in the water content ratio influenced the strength value of the specimen. A faster load rate had a greater influence on the uniaxial compression and indirect tensile strengths of a frozen specimen and produced a different strength engineering property through the initial tangential modulus of elasticity. Finally, the long-term strength under a constant water content ratio and freezing temperature was checked by producing stress-strain ratio curves depending on the loading rate.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.447-454
• /
• 2009

Rate-independent crystal plasticity model suffers from the non-uniqueness of activated slip systems and the determination of the shear slip rates on the active slip systems. In this paper, a time-integration algorithm which circumvents the problem of the multiplicity of the slip systems was developed and implemented into the user subroutine VUMAT of a commercial finite element program ABAQUS. The magnitude of the slip shears on the active slip systems in f.c.c Cu single crystal aligned with the specific crystallographic orientation was investigated to validate our solution procedure. Also, texture developments under various deformation modes such as simple compression, simple tension and plane strain compression were compared with the results of the rate-dependent model by using the rate-independent crystal plasticity model. The computation time employing the rate-independent model is much more reduced than the those of the rate-dependent model.

• Journal of Korean Neurosurgical Society
• /
• 제62권5호
• /
• pp.594-602
• /
• 2019

Objective : Although surgical intervention, such as percutaneous vertebroplasty (PVP), is the standard treatment for osteoporotic vertebral compression fractures (OVCFs), its effectiveness and safety are unclear. Therefore, this study compared the safety and efficacy of conservative treatment with that of PVP for acute OVCFs. Methods : Patients with single-level OVCFs who were treated conservatively with a transdermal fentanyl patch (TFP) or with PVP between March 2013 and December 2017 and followed-up for more than 1 year were retrospectively evaluated. Patients with pathologic fractures, fractures of more than two columns, or a history of PVP were excluded. Clinical outcomes (visual analog scale [VAS] scores) and radiographic factors were evaluated, including changes in the compression rate of the corresponding vertebral body at onset and after 12 months, sagittal Cobb angle at onset and after 6 and 12 months, and the incidence of adjacent compression fractures. Results : Of the 131 patients evaluated, 75 were treated conservatively using TFPs and 56 underwent PVP. We divided the patients into TFP and PVP groups. Their baseline characteristics (including sex, level of fracture, and bone mineral density T-scores) were similar, but the TFP group was significantly younger. The overall VAS score for pain showed a greater decrease during the first month (1 week after PVP) in the PVP group but remained similar in the two groups thereafter. The compression rate after 12 months increased in the TFP group but decreased in the PVP group. Five patients in the PVP group, but none in the TFP group, experienced adjacent compression fractures within 12 months. Conclusion : We compared clinical and radiological outcomes between the TFP and PVP groups. The immediate pain reduction effect was superior in the PVP group, but the final clinical outcome was similar. Although the PVP group had a better-preserved compression rate than the TFP group for 1 year, the development of adjacent fractures was significantly higher. Although TFPs seemed to be beneficial in reducing the failure rate of conservative treatment, the possibility of side effects (22.6%, 17 out of 75 patients, in this study) should be carefully monitored.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.1-6
• /
• 2023

시공 편의성 및 경제성 측면에서 장점이 있는 PE배관은 국내 도시가스 분야에서 지하 매설용으로 많이 사용되고 있다. 이러한 PE배관은 유지·보수 공사 중 가스 흐름을 차단하기 위해 많은 현장에서 스퀴즈오프를 활용하고 있다. 스퀴즈오프란 PE배관을 압착하여 유체 흐름을 차단하는 방법을 말하며 물리적인 힘에 의해 배관의 변형이 일어나는 공사의 특성상 손상이 발생할 수 있다. 본 연구에서는 스퀴즈오프에 따른 PE배관의 손상방지를 위해 압축률에 따른 손상평가 및 기밀시험을 통해 적정한 압축의 범위와 사용 압력, 관경 등의 스퀴즈오프 작업 절차에 반영될 주요 사항들을 도출하였다. PE배관 손상평가를 위한 압축 실험은 압축률(20%~40%)과 사용압력 (2.8kPa, 25kPa, 70kPa), 관경(63mm, 90mm, 110mm)을 변화시키면서 실시하였다. 압축률에 따른 손상평가 결과, 과도한 압축에 따른 영향을 분석하기 위한 압축률인 45%(110mm), 73%(63mm)인 배관에서 파손이 발생하였다. 또한, 스퀴즈오프 작업 중 기밀시험은 Ar(아르곤)을 이용하여 진행되었으며, 실험결과 70kPa의 조건과 110mm 의 배관 조건에서 누출이 발생하였다. 본 연구 결과, 기밀유지를 위한 스퀴즈오프는 25kPa이하의 사용압력 및 90mm 배관을 초과하지 않는 범위의 배관에서 작업을 실시해야하며 PE배관의 손상방지를 위한 적정 압축률은 30%임을 확인하였다. 이와같은 내용을 도시가스용 PE배관의 스퀴즈오프 작업 절차에 반영할 예정이다.

• 농업과학연구
• /
• 제17권2호
• /
• pp.95-101
• /
• 1990

점성토(粘性土)의 일축압축시험(一軸壓縮試驗)에서 공시체(供試體)의 크기와 압축속도(壓縮速度)를 변화(變化)시키면서 실시(實施)한 시험결과(試驗結果)를 요약(要約)하면 다음과 같다. 1. 공시체(供試體)의 단면(斷面)이 증가(增加)하면 일축압축강도(一軸壓縮强度)는 감소(減少)하는 현상(現像)을 나타낸다. 2. 공시체(供試體)의 높이와 지름의 비(比)가 증가(增加)하면 일축압축강도(一軸壓縮强度)는 감소(減少)하였다. 3. 압축속도(壓縮速度)가 매년(每年) 3%까지는 일축압축강도(一軸壓縮强度)가 증가(增加)했으나 3%를 초과(超過)하면 오히려 감소(減少)하는 현상(現像)을 나타냈다. 4. 압축속도(壓縮速度)가 클수록 변형계수(變形係數)는 증가(增加)하는 경향(傾向)을 나타냈다.