• 반도체디스플레이기술학회지
• /
• 제6권3호
• /
• pp.55-59
• /
• 2007

Wavelet Transform is amenable to efficient algorithms. So wavelet transform was adopted many signal processing and communication applications. For example, the wavelet transform was adopted as the transform for JPEG2000. However, Wavelet has weakness about smoothness along the contours and limited directional information. Hence, recently, some new transforms have been introduced to take advantage of this property. So we use to other transform, called contourlet transform in compression. In this paper, we propose a new method for image compression based on the contourlet transform, which has been recently introduced. Contourlet transform has a good result about images with smooth contours. Moreover, Contourlet is feasible multiresolution and multidirection expansion using non-separable filter bank. This treatise shows a good image representation after compressing using contourlet transform.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.36-42
• /
• 1997

This paper presents a new design technique for performing high quality low bit rate image compression. A hybrid coder(HC) which combines Mean Removed Important Coefficient Selection based JPEG(MR-ICS-JPEG) and Adaptive Vector Quantization (AVQ) is proposed. A new quantization table is developed using the Important Coefficient Selection(ICS) method; the importance of each coefficient is determined using the orthonormal property of the DCT. This quantization table is applied to standard JPEG with mean removal(MR) strategy before processing. This scheme, called MR-ICS-JPEG, produces more than 2 dB enhanced performance in terms of PSNR over standard JPEG. A set of homogeneous codebooks is generated by homogeneous training vectors. Before compression, an image is uniformly divided into 8${\times}$8 blocks. Low detail regions such as backgrounds are roughly coded by AVQ while high detail regions such as edges or curves are finely coded by the proposed MR-ICS-JPEG. This hybrid coder procuces consistently about 3 dB improved performance in terms of PSNR over standard JPEG.

• 한국통신학회논문지
• /
• 제32권11C호
• /
• pp.1079-1086
• /
• 2007

본 논문에서는 고출력 증폭기 (High Power Amplifier; HPA)의 비선형 특성에 관계없이 시스템의 비트오율 (Bit Error Rate; BER) 성능을 유지하면서 동시에 효율적으로 PAPR (Peak-to-Average Power Ratio)을 감소시킬 수 있는 CCP (Companding Combined with Predistorter) 기법을 제안한다. 제안된 CCP 기법은 기존에 본 저자들이 제안한 Companding 기법이 가지고 있는 Compression 특성과 HPA의 비선형 왜곡 특성에 의해 발생되는 전송 신호의 왜곡으로 인해 나타나는 시스템의 BER 성능 열화를 보완하기 위해 Predistorter를 기존의 Companding 기법에 결합하였다. 따라서, 제안된 CCP 기법은 HPA의 비선형 특성에 관계없이 효율적으로 PAPR을 감소시킬 수 있으며 동시에 시스템의 BER 성능도 유지시킬 수 있는 PAPR 감소 방식이라고 할 수 있다. 모의실험 결과, 제안된 CCP 기법은 TD (Total Degradation) 측면에서 Predistorter를 고려한 Clipping 기법과 Wang이 제안한 Companding 기법에 비해 모든 변조방식에서 가장 낮은 TD 성능을 나타내고 있음을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.469-472
• /
• 2008

일반적으로 콘크리트는 높은 압축강도에 비해 매우 낮은 휨강도 및 인장강도를 가진 재료지만 고인성 콘크리트의 경우 다량의 섬유를 혼입함으로써 높은 인장강도를 가지는 한편, 균열 발생 후에도 변형경화 현상을 보이며 높은 인성을 가지게 된다. 따라서 이러한 고인성 콘크리트의 인장특성을 평가하기 위해서는 기존 콘크리트의 시험방법과 다른 일축인장시험이 필수적이라 할 수 있다. 그러나 콘크리트의 압축시험에 있어서도 치수, 형상, 단부조건 등의 요인이 변하면 얻어지는 결과가 상이한 상황에서, 시멘트계 재료의 인장시험에서는 재료의 특성상, 섬유의 배향 문제에서부터 섬유길이와 공시체 단면치수의 관계가 결과에 영향을 미치게 된다. 이에 본 연구에서는 시험체 치수 및 시험방법에 따른 고인성 콘크리트의 인장특성을 검토하였고, 시험체 치수가 얇아질수록 섬유배열이 곧게 되어 더 높은 성능을 발휘함을 확인 할 수 있었다.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.9-17
• /
• 2018

Brazilian splitting tests, uniaxial compression tests and triaxial compression tests are carried out on the coal samples cored from Shanxi group $II_1$ coal seam of Jiaozuo coal mine, Henan province, China, to obtain their property parameters. Considering the bedding has notable effect on the property parameter of coal, the samples with different bedding angles are prepared. The effects of bedding on the anisotropic characteristics of the coal seam are investigated. A geological geomechanical model is built based on the geology characteristics of the Jiaozuo coal mine target reservoir to study the effects of bedding on the fracture propagations during hydraulic fracturing. The effects of injection pressure, well completion method, in-situ stress difference coefficient, and fracturing fluid displacement on the fracture propagations are investigated. Results show bedding has notable effects on the property parameters of coal, which is the key factor affecting the anisotropy of coal. The hydraulic cracks trends to bifurcate and swerve at the bedding due to its low strength. Induced fractures are produced easily at the locations around the bedding. The bedding is beneficial to form a complicated fracture network. Experimental and numerical simulations can help to understand the effects of bedding on hydraulic fracturing in coalbed methane reservoirs.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.70-70
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.749-750
• /
• 2011

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.3802-3807
• /
• 2011

본 연구에서는 알루미늄 폼 및 허니컴 샌드위치 복합재료의 면내 외 압축실험을 수행하였다. 실험을 통하여 하중-변위의 관계를 분석하고 압축 특성을 비교한다. 시험편은 만능재료시험기를 사용하여 1 mm/min로 압축을 하였다. 실험과정은 카메라로 촬영하고, 로드셀에서 나오는 데이터는 컴퓨터로 저장하였다. 실험결과를 보면 하중이 증가함에 따라 알루미늄 폼 및 허니컴 심재에 좌굴이 발생하였다. 면내 압축실험에서 알루미늄 폼 및 허니컴 샌드위치 시험편의 압축 최대하중은 비슷하였다. 그러나 비중을 고려하면 허니컴이 폼보다 압축 특성이 더 우수하다. 면외 압축실험에서도 알루미늄 허니컴 샌드위치 복합재료의 압축 최대하중이 알루미늄 폼 샌드위치 복합재료보다 높게 나왔다.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.354-359
• /
• 2007

Effects of forging and mechanical properties of 6061 aluminum alloy wheel for automobiles were investigated in the present study. Microstructural and tensile characteristics of automobile wheel after hot forging process using dynamic screw press were analyzed to evaluate effect of metal flow on mechanical properties. The results showed advanced mechanical properties of 6061 alloy wheel because of $Mg_2Si$ precipitation by T6, elongated grain by forging, and work hardening by dense metal flow, etc. Hot compression tests were conducted in order to characterize high temperature compression deformation behaviors and microstructural variation in the range of $300{\sim}450^{\circ}C$, in the strain rate range of $10^{-3}{\sim}10^1\;sec^{-1}$. As strain rate increased, maximum compression stress increased but it was shown the reverse linear relation between temperature and maximum stress irrelevant to strain rate variation. On the other hand, temperature and yield stress didn't have any linear relation and its relation showed big deviation by a function of strain rate and test temperature.