• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.855-875
• /
• 2015

Many novel materials exhibit a property of different elastic moduli in tension and compression. One such material is graphene, a wonder material, which has the highest strength yet measured. Investigations on buckling problems for structures with different moduli are scarce. To address this new problem, firstly, the nondimensional expression of the relation between offset of neutral axis and deflection curve is derived based on the phased integration method, and then using the energy method, load-deflection relation of the rod is determined; Secondly, based on the improved constitutive model for different moduli, large deformation finite element formulations are developed and combined with the arc-length method, finite element iterative program for rods with different moduli is established to obtain buckling critical loads; Thirdly, material mechanical properties tests of graphite, which is the raw material of graphene, are performed to measure the tensile and compressive elastic moduli, moreover, buckling tests are also conducted to investigate the buckling behavior of this kind of graphite rod. By comparing the calculation results of the energy method and finite element method with those of laboratory tests, the analytical model and finite element numerical model are demonstrated to be accurate and reliable. The results show that it may lead to unsafe results if the classic theory was still adopted to determine the buckling loads of those rods composed of a material having different moduli. The proposed models could provide a novel approach for further investigation of non-linear mechanical behavior for other structures with different moduli.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.103-111
• /
• 2004

There are some problems in evaluating the bearing capacity of decomposed granite soils by general equations on account of their inherent compressibility and crushability. In order to investigate this kind of the engineering characteristics on decomposed granite soils in detail, it is necessary to how the micro property of the single particle composing the granite soils, and then the relevance to the macro characteristics of the soils has to be cleared. The reason why the single particle properties are not studied is first the difficulty to find out some regulating parameters, and secondly little understanding of its significance. Furthermore, the water in the decomposed granite soils accelerates the particle crushing. Consequently, increasing of compressibility and decreasing of shear strength would occur. Actually, when the ground settlement is a big issue in the embanked ground using the decomposed granite soils, the sensitive change of compressibility due to the change of water content in the ground becomes conspicuous. In this study, the single particle strength characteristics are studied and microscopic particle shape analyses are performed. In addition the compressibility of the decomposed granite soils and water content effect on the compressibility are analysed based on the test results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.1
• /
• pp.45-56
• /
• 2010

Polymer composite materials offer high strength and stiffness to weight ratio, corrosion resistance, and total life cost reductions that appeal to the marine industry. The advantages of composite construction have led to their incorporation in U.S. yacht hull structures over 46 meters (150 feet) in length. In order to construct even larger hull structures, higher quality composites with lower cost production techniques need to be developed. In this study, the effect of composite hull fabrication processes on mechanical properties of glass fiber reinforced plastic (GFRP) composites is presented. Fabrication techniques investigated during this study are hand lay-up (HL), vacuum infusion (VI), and hybrid (HL+VI) processes. Mechanical property testing includes: tensile, compressive, and ignition loss sample analysis. Results demonstrate that the vacuum pressure implemented dining composite fabrication has an effect on mechanical properties. The VI processed GFRP yields improved mechanical properties in tension/compression strengths and tensile modulus. The hybrid GFRP composites, however, failed in a sequential manor, due to dissimilar failure modes in the HL and VI processed sides. Fractography analysis was conducted to validate the mechanical property testing results.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.3
• /
• pp.1-7
• /
• 2007

The property of weathered soil cannot but have a possibility of having a limit when its precise approaching due to the various weathering environment, and the peculiarity of its conduct affected by the weathering degree and effect factors. Especially most domestic or international researches are concentrated on the sedimentary soil, trying to analyze the mechanical behavior of weathered soil from the viewpoint of sedimentary soil. Therefore, it's difficult to judge if those results meet the actual conduct of weathered soil. This study suggested a way of weathering degree changing experiment as an early stage in an experiment of artificially changing weathering degree. In order to find out the property of strength change by the change of weathering degree, indoor mechanical experiment was made using soil sample after freezing and thawing. Under the weathering degree, characteristic change is watched by country rock and region of weathered granite soil.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.10
• /
• pp.1467-1477
• /
• 2002

This study was investigated physical properties of stretch fabrics by KES-FB system to show suitable basic data to making skirts of excellent capacity and develop more organized basic skirt pattern by fitness evaluation. 1. The results of T. H. V.(Total Hand Value) were as followa: In the kind of blending fiber, cotton/spandex was more excellent than nylon/spandex and polyester/spandex, in the direction of stretch, one-way(weft inserted polyurethan yarn) polyester/spandex and cotton/spandex were higher than two-way(warp and wet inserted polyurethan yarn) polyester/spandes and cotton/spandex, two-way nylon/spandex was higher than one-way nylon/spandex. 2. The results of calculating the variance between sample stretch fabrics and Japanese s/s women's suit fabrics after standardizing were as follows: Stretch fabrics has 2 range of tensile, bending, shearing, compression, surface, thickness and weight as compared with Jpanese s/s women's suit fabrics. In the tensile property, one-way stretch fabrics were almost the same with Japanese s/s women's suit fabrics, only two-way polyester/spandex had+1～+2 range. In the bending, shear property, there was no difference between sample fabrics and Japanese s/s women's suit fabrics 3. In the total fitness of the skirt, nylon/spandex is the best in the fabrics and one-way stretch fabric is better than two-way strethch fabric.

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.107-116
• /
• 2004

This thesis is results of experimental works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand. Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Compared results model tests estimation with respect to displacements of the lining.

• ETRI Journal
• /
• v.31 no.4
• /
• pp.365-375
• /
• 2009

In this paper, a terrestrial digital multimedia broadcasting (T-DMB) multichannel audio broadcasting system based on spatial audio coding is presented. The proposed system provides realistic multichannel audio service via T-DMB with a small increase of data rate as well as backward compatibility with the conventional stereo-based T-DMB player. To reduce the data rate for additional multichannel audio signals, we compress the multichannel audio signals using the sound source location cue coding algorithm, which is an efficient parametric multichannel audio compression technique. For compatibility, we use the dependent property of an elementary stream descriptor, and this property should be ignored in a conventional T-DMB player. To verify the feasibility of the proposed system, we implement the T-DMB multichannel audio encoder and a prototype player. We perform a compatibility test using the T-DMB multichannel audio encoder and conventional T-DMB players. The test demonstrates that the proposed system is compatible with a conventional T-DMB player and that it can provide a promisingly rich audio service.

• Composites Research
• /
• v.28 no.3
• /
• pp.136-141
• /
• 2015

The stitching process has been widely utilized for the improvement of through-thickness property of the conventional laminated composites. This paper reports the effects of stitching on the flexural and interlaminar shear properties of multi-axial warp knitted (MWK) composites in order to identify the mechanical property improvements. In order to minimize the geometric uncertainties associated with the stacking pattern of fabrics, the regular lay-up was considered in the examination of the stitching effect. The key parameters are as follows: the stitch spacings, the stitching types, the stitching location, and the location of compression fixture nose. These parameters have little effect on the flexural and interlaminar shear properties, except for the case of stitching location. However, the geometry variations caused by the stitching resulted in minor changes to the mechanical properties consistently. Stitching on the $0^{\circ}$ fibers showed the lowest flexural strength and modulus (12% reduction for both properties). The stitch spacing of 5 mm resulted in 8% reduction for the case of interlaminar strength compared with that of 10 mm spacing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.83-86
• /
• 2005

In this study, SAM (self-assembled monolayer) was applied as an anti-adhesion layer in the nano molding process, to reduce the surface energy between the nano-stamper and the moldeded polymeric nano patterns. Before depositing SAM on the stamper, the nickel stamper was pretreated to remove oxide on the nickel stamper surface. Then, using the solution deposition method, alkanethiol SAM as an anti-adhesion layer was deposited on nickel surface. To examine the effectiveness of the SAM deposition on the metallic nano stamper, the contact angle and the lateral friction force were measured at the actual processing temperature and pressure for the case of nano compression molding and at the actual UV dose for the case of nano UV molding. The surface energy due to SAM deposition on the nickel nano stamper markedly decreased and the high hydrophobic quality of SAM on the nickel stamper maintained under the actual molding environments.

• Geomechanics and Engineering
• /
• v.10 no.2
• /
• pp.207-224
• /
• 2016

Granulated coal ash (GCA), a mixture of the by-product from milling processes with a small amount of cement added, has recently come to be used as a new form of geomaterial. The shear strength and deformation behaviours of GCA are greatly determined by its relative density or void ratio. A series of drained triaxial compression tests were performed on cylindrical specimens of GCA at confining pressures of between 50 kPa and 400 kPa at initial relative densities of 50%, 70% and 80%. Experimental results show that a rise in relative density increases the peak shear strength and intensifies the dilation behaviour. The initial tangent modulus and secant modulus of the stress-strain curve increase with increasing initial relative density, whereas the axial and volumetric strains at failure decrease with level of initial relative density. The stress-dilatancy relationships of GCA at different relative densities and confining pressures display similar tendency. The dilatancy behaviour of GCA is modelled by the Nova rule and the material property N in Nova rule of GCA is much larger than that of natural sand.