• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.581-591
• /
• 2011

This paper describes the air compressibility effect in the CFD simulation of water impact load prediction. In order to consider the air compressibility effect, two sets of governing equations are employed, namely the incompressible Navier-stokes equations and compressible Navier-Stokes equations that describe general compressible gas flow. In order to describe violent motion of free surface, volume-of-fluid method is utilized. The role of air compressibility is presented by the comparative study of water impact load obtained from two different air models, i.e. the compressible and incompressible air. For both cases, water is considered as incompressible media. Compressible air model shows oscillatory behavior of pressure on the solid surface that may attribute to the air-cushion effect. Incompressible air model showed no such oscillatory behavior in the pressure history. This study also showed that the CFD simulation can capture the formation of air pockets enclosed by water and solid surface, which may be the location where the air compressibility effect is dominant.

• Geomechanics and Engineering
• /
• 제25권3호
• /
• pp.245-251
• /
• 2021

The present study investigated the ageing effect on compressibility, permeability and shear strength behavior of kaolin and bentonite samples in the presence of NaCl and CaCl₂ solutions. The compressibility, permeability and shear strength parameters were determined on the 60, 190, and 250 days cured samples. The results have shown that, the kaolin sample becomes more compressible in the presence Ca²⁺ ions with ageing. Generally, the normalized compression index values of bentonite samples increased at the end of 60 days and 250 days curing time periods. The normalized permeability value of kaolin decreased by ageing in the presence of Na⁺ ions almost twofold. The permeability values of bentonite increased both in NaCl and CaCl₂ solutions during ageing. In the presence of Na⁺ ions kaolin had higher max. shear stress value than Ca²⁺ ions. When the max. shear stress values of 0, 60 and 190 days samples were compared, it was seen that NaCl solution had no significant effect on the shear strength of kaolin sample. However, the shear strength of kaolin increased in the CaCl₂ solution during ageing. In the presence of Ca²⁺ ions the max. shear stress value of bentonite was higher. The results of this study have shown that ageing has significant effects on the compressibility, permeability and shear strength of kaolinitic and bentonitic clayey soils.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.67-73
• /
• 2004

Effect of calendering on structural and surface properties of sheets made of various pulp was investigated. BKP, BCTMP and KOCC were used as raw materials for handsheets and sheets were calendered at the different calendering temperature and pressure conditions. Caliper, air permeability, and PPS roughness were reduced by calendering, but their effects were a little different depending on pulp type and calendering condition. Increase of density with increase of calendering Pressure was remarkable on sheet made of BCTMP or KOCC, and the effect of temperature was more significant than pressure. PPS roughness of sheet made of BCTMP or KOCC was reduced by calendering, but BKP sheet showed little reduction of roughness at higher calendering pressure. The compressibility of sheet increased logarithmetically with calendering pressure and surface compressibility of KOCC sheet was relatively higher than other pulps.

• 자원환경지질
• /
• 제47권3호
• /
• pp.247-254
• /
• 2014

불균질한 자연균열 저류층에서 암체의 압축률은 매우 작은 값을 가지는 반면에 균열의 압축률은 상대적으로 큰 값을 갖는다. 균열의 압축률을 포함한 유효 압축률을 고려하지 않을 경우에는 균열의 간극 변화로 인한 공극 부피의 변화를 반영할 수 없기 때문에 정확한 오일 회수를 예측할 수 없다. 본 연구에서는 기존의 연구들에서 암체의 압축률만을 고려하여 오일 회수를 분석했던 것과 달리, 암체와 균열의 압축률을 모두 고려한 유효 압축률을 적용해서 오일 회수량을 분석하였다. 폴리머 공법에서 균열의 압축률이 폴리머의 주입에 미치는 영향을 이해하기 위해, 폴리머의 분자량, 농도, 주입속도에 따른 오일 회수량을 분석하였다. 유효 압축률을 고려할 경우 폴리머 분자량, 농도, 주입속도가 높아질수록 유효 압축률을 고려하지 않은 경우가 고려한 경우보다 누적 오일 생산량이 높게 나타났다. 또한 공저 압력의 경우에도 유효 압축률을 고려하지 않은 경우가 고려한 경우보다 빠르게 급감하여 오일 생산량에 영향을 주는 것을 확인할 수 있다.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.345-352
• /
• 2008

The motion of a projectile initiated by the release of highly pressurized air is simulated presuming the flow field as a two dimensional one. The effects of water compressibility on projectile movements are investigated, comparing results based on the Fluent VOF model where water is treated as an incompressible medium with those from the presently developed VOF scheme. The present model considers compressibility of both air and water. The Fluent results show that the body moves farther and at higher speeds than the present ones. As time proceeds, the relative difference of speed and displacement between the two results drops substantially, after acoustic waves in water traverse and return the full length of the tube several times. To estimate instantaneous accelerations, however, requires implementation of the water compressibility effect as discrepancies between them do not decrease even after several pressure wave cycles.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.51-66
• /
• 2007

A layer of compressible, rotating, elastica-viscous fluid heated & soluted from below is considered in the presence of vertical magnetic field to include the effect of Hall currents. Dispersion relation governing the effect of viscoelasticity, salinity gradient, rotation, magnetic field and Hall currents is derived. For the case of stationary convection, the Rivlin-Erickson fluid behaves like an ordinary Newtonian fluid. The compressibility, stable solute gradient, rotation and magnetic field postpone the onset of thermosolutal instability whereas Hall currents are found to hasten the onset of thermosolutal instability in the absence of rotation. In the presence of rotation, Hall currents postpone/hasten the onset of instability depending upon the value of wavenumbers. Again, the dispersion relation is analyzed numerically & the results depicted graphically. The stable solute gradient and magnetic field (and corresponding Hall currents) introduce oscillatory modes in the system which were non-existent in their absence. The case of overstability is discussed & sufficient conditions for non-existence of overstability are derived.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.47-53
• /
• 2011

항로유지 준설과 해안건설 현장에서 채취된 해양준설토는 일반적으로 점토 성분 내에 다량의 염분을 함유하고 있다. 본 논문은 염분이 포함된 고화준설토(S-SDS)와 염분이 포함되지 않은 고화준설토(N-SDS)의 역학적 특성에 대한 염분의 영향을 분석하였다. 이를 위해 염분이 포함된 준설토와 염분이 포함되지 않은 준설토에 각각 동일한 양의 시멘트를 혼합하여 여러 개의 시편을 제작하였다. 7일 혹은 28일 양생된 N-SDS와 S-SDS 시편에 대하여 전자현미경 분석, 일축압축시험 및 구속압축시험을 수행함으로써 고화준설토의 미세 흙구조, 강도 및 압축 특성을 비교 및 분석하였다. 실험결과 점토에 포함된 염분은 고화준설토의 미세 흙구조 형성 뿐만 아니라 고화토의 강도발현에 영향을 주는 것으로 나타났다. 또한 S-SDS의 압축지수와 팽창지수는 N-SDS 보다 크게 나왔다. 이것으로부터 염분은 고화토의 압축성을 증가시킨다는 것을 알 수 있다. 염분은 고결화된 준설토의 강도발현 및 압축성에 악영향을 주었다.

• Structural Engineering and Mechanics
• /
• 제13권4호
• /
• pp.355-368
• /
• 2002

In this paper, we address the numerical investigation on the effect of liquid compressibility onto the natural frequency of liquid-filled containers. Traditionally the liquid motion has been treated as an ideal fluid motion. However, from the numerical experiments for the axisymmetrical free-vibration of cylindrical liquid-storage tanks, we found that the relative difference in natural frequencies between ideal and compressible motions becomes remarkable, as the slenderness of tank or the relative liquid-fill height becomes larger. Therefore, in such cases of dynamic systems, the liquid compressibility becomes an important parameter, for the accurate vibration analysis. For the free-vibration analysis of compressible liquid-structure interaction we employed the coupled finite element formulation expressed in terms of the acoustic wave pressure and the structure deformation.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• Applied Biological Chemistry
• /
• 제36권6호
• /
• pp.416-423
• /
• 1993

건조방법 및 원료성분을 달리하여 분유를 제조하고 이들분유의 몇 가지 리올로지 특성을 Instron Universal Testing Machine으로 측정하여 얻어진 결과는 다음과 같다. 드럼건조된 전지분유의 부피밀도는 $0.382\;g/cm^3$으로 탈지 및 조제 분유보다 높았고, 분무 건조된 탈지 분유의 Hausner ratio, 평정각 및 compressibility 는 각각 1.127, $32.5^{\circ}$, 0.029로 탈지 분유는 자유롭게 흐르는 것을 보여주었으며, 드럼건조된 전지분유의 compressibility는 수분 함량이 4.96%에서 3.89%로 감소함에 따라 0.079에서 0.052로 낮아졌다. 전지분유 그래뉼의 compressibility는 0.056으로서 분유의 compressibility보다 낮았다. 분무 건조된 분유는 구형으로서, 동결건조나 드럼건조된 분유보다 더 견고함을 나타냈다.