• 한국수소및신에너지학회논문집
• /
• 제35권4호
• /
• pp.451-459
• /
• 2024

This paper quantitatively analyzes the causes of ammonia-filled- cylinder rupture based on Tait equation and the safety guidelines, focusing on liquid expansion, internal temperature, and overfilling. When there exists a safety volume, i.e., gas-occupied volume within the ammonia cylinder, the internal pressure due to temperature rise corresponds to the vapor pressure at that temperature, with an approximate circumferential stress increase of 1.43 MPa/℃. In the absence of the safety volume, the internal pressure due to temperature rise matches the pressure of the compressed liquid ammonia at that temperature, and the resulting circumferential stress gradient in the cylinder shell is approximately 55.94 MPa/℃.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.895-904
• /
• 2011

Stratified charge has been thought as one of the ways to avoid a sharp pressure rise on HCCI combustion. The purpose of this study is to evaluate the potential of stratified charge for reducing PRR on HCCI combustion. The pre-mixture with thermal, mixing and EGR stratifications is charged in Rapid Compression Machine. After that, the pre-mixture is compressed and in that process, in-cylinder gas pressure and temperature are analyzed. Additionally numerical calculation with multi-zones modeling is run to know the potential of stratified charge for reducing PRR.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.162-168
• /
• 2023

The fast refueling process of compressed hydrogen has an important impact on the filling efficiency and safety. With the development and use of hydrogen energy, the demand for precision measurement of filling hydrogen thermodynamic parameters is also increasing. In this paper, the compressibility factor calculation model of high-pressure hydrogen gas was studied, and the basic equation of state and thermo-physical parameters were calculated. The hydrogen density data provided by the National Institute of Standards and Technology was compared with the calculation results of each model. Results show that at a pressure of 0.1-100 MPa and a temperature of 233-363 K, the calculation accuracy of the Zheng-Li equation of state was less than 0.5%. In the range of 0.1-70 MPa, the accuracy of Redich-Kwong equation is less than 3%. The hydrogen pressure more influences on the compressibility factor than the hydrogen temperature does. Using the Zheng-Li equation of state to calculate the compressibility factor of on-board high pressure hydrogen can obtain high accuracy.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.499-504
• /
• 2009

The effect of gas diffusion layer (GDL) compression caused by different stack clamping pressures on fuel cell performance was experimentally studied in a miniature 5-cell proton exchange membrane fuel cell (PEMFC) stack. Three stacks with different GDL compressions, 15%, 35% and 50%, were prepared using SGL 10BC carbon fiber felt GDL and Gore 57 series MEA. The PEMFC stack performance and the stack stability were enhanced with increasing stack clamping pressure resulting in the best performance and stability for the stack with higher GDL compressions up to 50%. The excellent performance of the stack with high GDL compression was mainly due to the reduced contact resistance between GDL and bipolar plate in the stack, while reduced gas permeability of the excessively compressed GDL in the stack hardly affected the stack performance. The high stack clamping pressure also resulted in excessive GDL compression under the rib areas of bipolar plate and large GDL intrusion into the channels of the plate, which reduced the by-pass flow in the channels and increase gas pressure drop in the stack. It seems that these phenomena in the highly compressed stack enhance the water management in the stack and lead to the high stack stability.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.8-14
• /
• 2015

합성가스(SNG)는 석탄 가스화를 통하여 얻어지는 가스연료로서, 고유가로 인한 천연가스가격 상승을 대비할 수 있는 대체연료 중의 하나로 주목받고 있다. 본 연구에서는 메탄 90.95%, 프로판 6.05%와 수소 3%의 조성비를 갖는 SNG연료 모사가스와 압축천연가스 (CNG)를 11리터 급 CNG 엔진에 적용하여 연소 및 배기 특성을 비교실험 하였다. 연료공급시스템, 분사시기 등 엔진의 연소제어인자를 일정하게 하고 전부하 운전조건에서 엔진회전수 변화에 따른 출력, 열효율, 연소 안정성 및 배기특성을 비교하였다. 1260rpm, 전부하 운전조건에서 노킹특성도 분석하였다. SNG 연료를 사용했을 때 출력 저하 없이 연소안정성이 향상되어 열효율이 증가하였다. 질소산화물($NO_x$)의 배출은 CNG연료의 경우에 비해 증가되었으나 이산화탄소($CO_2$)의 배출은 감소하였다. SNG 연료를 이용하여 운전할 경우 내노킹성이 향상되었다.

• 에너지공학
• /
• 제19권3호
• /
• pp.171-176
• /
• 2010

천연가스-수소 혼합가스를 엔진 연료로 사용하는 방법은 배기가스 저감뿐만 아니라 다가올 수소에너지 시대를 대비하여 수소 인프라를 구축하는 데도 의의가 있다. 또한 수소 혼합 천연가스 연료 엔진은 천연가스 엔진 보다 더 높은 열효율 확보할 수 있어 에너지의 효율적 사용에 있어서도 매우 우수한 연료이다. 본 연구에서는 시내버스가 가장 많이 운전되는 조건인 아이들 조건을 대상으로 수소 혼합 천연가스 연료가 연료소모량과 배기가스 저감에 미치는 영향을 파악하였다. 실험 결과 수소 혼합 천연가스 연료는 천연가스에 비해 아이들 조건에서 연료소비율이 20%이상 저감되었으며 유해 배출가스인 THC, NOx를 근원적으로 저감시킴을 확인할 수 있었다.

• 한국가스학회지
• /
• 제16권2호
• /
• pp.25-30
• /
• 2012

본 논문에서는 알루미늄 라이너와 탄소섬유/에폭시 및 유리섬유/에폭시로 구성된 복합소재 압력용기에 대한 응력 안전성 연구결과를 제시하고 있다. 9.2L의 저장용량을 갖는 수소가스 자동차용 복합소재 압력용기에는 35MPa의 충전압력으로 수소가스를 압축한 경우이다. FEM 해석결과는 미국의 수소가스 압력용기에 대한 DOT-CFFC와 한국의 KS B ISO 인증기준에 기반하여 평가하였다. FEM 해석결과에서 알루미늄 라이너에 걸리는 응력 247MPa는 알루미늄 항복강도(272MPa)의 95%에 해당하는 안전기준에 비해 충분히 낮다는 결과이다. 그리고 알루미늄의 표면에 감은 탄소섬유 복합소재는 후프방향과 헤리컬방향에서 발생한 최대탄소섬유응력이 29.43%와 28.87% 수준으로 각각 나타났기 때문에 최소파열압력에서의 최대섬유응력 대비 30% 이하를 유지해야 한다는 안전기준에 부합하므로 안전하다. 또한, 탄소섬유 복합소재에 대한 응력비는 후프방향과 헤리컬방향에 대해 3.4와 3.46으로 각각 예측되었기 때문에 최소안전기준인 2.4보다 높아 안전한 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.693-699
• /
• 2011

바이오매스나 기타 유기성 폐기물로부터 가스화공정을 거쳐 얻을 수 있는 합성가스는 환경보호와 화석연료고갈 방지 측면에서 유망한 대체연료 중 하나로 여겨지고 있다. 그러나 가스화로부터 얻어지는 합성가스는 일반적인 천연가스와 같은 가스연료에 비해 발열량이 낮고 연료조성이 불균일하여 내연기관에 적용시 안정적이고 지속적인 운전이 어렵다는 단점이 있다. 따라서 본 연구에서는 이러한 저발열량과 불균일한 가스 조성의 특징을 가진 합성가스가 연소에 미치는 영향을 파악하여 고효율의 엔진을 개발하고자 연구를 수행하였다. 저발열량의 합성가스를 모사하기 위하여 천연가스에 질소를 희석한 연료를 사용하였다. 또한 체적당 발열량을 유지하면서 동일유량조건으로 합성가스에 수소 혼합비율을 10 ~ 30%로 변화시키면서 연소 특성 변화를 살펴보았다.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.228-235
• /
• 2021

Polymer electrolyte membrane fuel cells (PEMFC) are currently being used in various transport applications such as drones, unmanned aerial vehicles, and automobiles. The power required is different according to the type of use, purpose, and the conditions adjusted using a cell stack. The fuel cell stack is compressed to reduce the size and prevent fuel leakage. The unit cells that make up the cell stack are subjected to compression by clamping force, which makes geometrical changes in the porous media and it impacts on cell performance. In this study, finite elements method (FEM) and computational fluid dynamics (CFD) analysis for the deformed unit cell considering the effects of clamping force is performed. First, structural analysis using the FEM technique over the deformed gas diffusion layer (GDL) considering compression is carried out, and the resulting porosity changed in the GDL is calculated. The PEMFC model is then verified by a three-dimensional, two-phase fuel cell simulation applying the physical properties and geometry obtained before and after compression. The detailed simulation results showed different concentration distributions of fuel between the original and deformed geometry, resulting in the difference in the distribution of current density is represented at compressed GDL region with low oxygen concentration.