Browse > Article
http://dx.doi.org/10.7316/KHNES.2021.32.4.228

Analysis of the Deformed Unit Cell by Clamping Force Through the FEM and CFD Interaction  

YOO, BIN (Department of Mechanical Engineering, Inha University Graduate School)
LIM, KISUNG (Department of Mechanical Engineering, Inha University Graduate School)
JU, HYUNCHUL (Department of Mechanical Engineering, Inha University Graduate School)
Publication Information
Transactions of the Korean hydrogen and new energy society / v.32, no.4, 2021 , pp. 228-235 More about this Journal
Abstract
Polymer electrolyte membrane fuel cells (PEMFC) are currently being used in various transport applications such as drones, unmanned aerial vehicles, and automobiles. The power required is different according to the type of use, purpose, and the conditions adjusted using a cell stack. The fuel cell stack is compressed to reduce the size and prevent fuel leakage. The unit cells that make up the cell stack are subjected to compression by clamping force, which makes geometrical changes in the porous media and it impacts on cell performance. In this study, finite elements method (FEM) and computational fluid dynamics (CFD) analysis for the deformed unit cell considering the effects of clamping force is performed. First, structural analysis using the FEM technique over the deformed gas diffusion layer (GDL) considering compression is carried out, and the resulting porosity changed in the GDL is calculated. The PEMFC model is then verified by a three-dimensional, two-phase fuel cell simulation applying the physical properties and geometry obtained before and after compression. The detailed simulation results showed different concentration distributions of fuel between the original and deformed geometry, resulting in the difference in the distribution of current density is represented at compressed GDL region with low oxygen concentration.
Keywords
Polymer electrolyte membrane fuel cell(PEMFC); Gas diffusion layer; Oxygen concentration; Current density; Intrusion;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 K. Palaniswamy, M. Marappan, and V. Rajendran Jothi, "Influence of porous carbon inserts on scaling up studies for performance enhancement on PEMFC", Int. J. Hydrogen Energy, Vol. 41, No. 4, 2016, pp. 2867-2874, doi: https://doi.org/10.1016/j.ijhydene.2015.10.148.   DOI
2 G. B. Joung, "Bidirectional power transmission fuel cell system for notebook battery", Trans Korean Hydrogen New Energy Soc, Vol. 28, No. 3, 2017, pp. 273-278, doi: https://doi.org/10.7316/KHNES.2017.28.3.273.   DOI
3 M. H. Song and K. Y. Kim, "Numerical study on flow distribution in PEMFC with metal foam bipolar plate", Trans Korean Hydrogen New Energy Soc, Vol. 27, No. 1, 2016, pp. 29-35, doi: https://doi.org/10.7316/KHNES.2016.27.1.029.   DOI
4 B. Wang, K. Wu, F. Xi, J. Xuan, X. Xie, X. Wang, and K. Jiao, "Numerical analysis of operating conditions effects on PEMFC with anode recirculation", Energy, Vol. 173, 2019, pp. 844-856, doi: https://doi.org/10.1016/j.energy.2019.02.115.   DOI
5 J. S. Lee, S. G. Kim, and Y. J. Sohn, "An experimental study on the natural convection heat transfer of air-cooling PEMFC in a enclosure", Trans Korean Hydrogen New Energy Soc, Vol. 27, No. 1, 2016, pp. 42-48, doi: https://doi.org/10.7316/KHNES.2016.27.1.042.   DOI
6 E. K. Lee, J. H. Baek, J. W. Lee, S. K. Lee, and Y. J. Lee, "A study on hydrogen impurity effect in anode of proton exchange membrane fuel cell on various concentration of CO and H2S", Trans Korean Hydrogen New Energy Soc, Vol. 27, No. 6, 2016, pp. 670-676, doi: https://doi.org/10.7316/KHNES.2016.27.6.670.   DOI
7 B. G. Lee and Y. J. Sohn, "Experimental analysis for optimization of PEM fuel cell dead-end operation", Trans Korean Hydrogen New Energy Soc, Vol. 26, No. 2, 2015, pp. 136-147, doi: https://doi.org/10.7316/KHNES.2015.26.2.136.   DOI
8 M. H. Lee, J. S. Choi, and B. W. Roh, "Synthesis and durability of carbon-supported catalysts for PEMFC", Trans Korean Hydrogen New Energy Soc, Vol. 26, No. 4, 2015, pp. 318-323, doi: https://doi.org/10.7316/KHNES.2015.26.4.318.   DOI
9 Y. H. Lee, D. J. Oh, U. S. Jeon, and J. H. Lee, "Development of an accelerated durability test mode for fuel cell", Trans Korean Hydrogen New Energy Soc, Vol. 26, No. 5, 2015, pp. 493-498, doi: https://doi.org/10.7316/KHNES.2015.26.5.493.   DOI
10 Y. D. Lim, S. H. Lee, H. H. Jang, J. H. Yoo, J. S. Ha, H. C. Ju, T. W. Hong, and W. Kim, "New multi-phenylene polymer electrolyte containing hexabenzocoronene interior for PEMFC", Int. J. Hydrogen Energy, Vol. 40, No. 2, 2015, pp. 1316-1323, doi: https://doi.org/10.1016/j.ijhydene.2014.09.143.   DOI
11 D. K. Ahn, H. J. Lee, H. S. Shim, and D. J. Kim, "Optimization of condensate water drain logic depending on the characteristics of drain valve in FPS of fuel cell vehicle and development of anode water management strategy to achieve high fuel efficiency and operational stability", Trans Korean Hydrogen New Energy Soc, Vol. 27, No. 2, 2016, pp. 155-162, doi: https://doi.org/10.7316/KHNES.2016.27.2.155.   DOI
12 A. Jo, S. Ahn, K. Oh, W. Kim, and H. Ju, "Effects of metal foam properties on flow and water distribution in polymer electrolyte fuel cells (PEFCs)", Int. J. Hydrogen Energy, Vol. 43, No. 30, 2018, pp. 14034-14046, doi: https://doi.org/10.1016/j.ijhydene.2018.01.134.   DOI
13 Y. Lee, "Variation of porosity and gas permeability of gas diffusion layers under compression", Trans. of the Korean Society of Mechanical Engineers, Vol. 37, No. 8, 2013, pp. 767-773, doi: https://doi.org/10.3795/KSME-B.2013.37.8.767.   DOI
14 J. Y. Yoon and J. S. Park, "Structural analysis of gasket and GDL for enhanced performance of PEMFC", Journal of the Korean Society for Aeronautical & Space Sciences, Vol. 36, No. 7, 2008, pp. 642-650. Retrieved from http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE01100765.   DOI
15 P. Chippar, K. Oh, D. Kim, T. W. Hong, W. Kim, and H. Ju, "Coupled mechanical stress and multi-dimensional CFD analysis for high temperature proton exchange membrane fuel cells (HT-PEMFCs)", Int. J. Hydrogen Energy, Vol. 38, No. 18, 2013, pp. 7715-7724, doi: https://doi.org/10.1016/j.ijhydene.2012.07.122.   DOI
16 P. Chippar, K. Oh, K. Kang, and H. Ju "A num erical investigation of the effects of GDL compression and intrusion in polymer electrolyte fuel cells (PEFCs)", Int. J. Hydrogen Energy, Vol, 37, No, 7, 2012, pp. 6326-6338, doi: https://doi.org/10.1016/j.ijhydene.2011.04.154.   DOI
17 K. Oh, P. Chippar, and H. Ju, "Numerical study of thermal stresses in high-temperature proton exchange membrane fuel cell (HT-PEMFC)", Int. J. Hydrogen Energy, Vol. 39, No. 6, 2014, pp. 2785-2794, doi: https://doi.org/10.1016/j.ijhydene.2013.01.201.   DOI
18 J. H. Baek, E. K. Lee, J. W. Lee, S. K. Lee, J. S. Moon, K. H. Kim, H. W. Park, D. C. Kim, and J. H. Lee, "A study on safety performance evaluation of NG blower for 5 kW class stationary fuel cell systems", Trans Korean Hydrogen New Energy Soc, Vol. 28, No. 6, 2017, pp. 675-682, doi: https://doi.org/10.7316/KHNES.2017.28.6.675.   DOI
19 H. S. Jeong, J. I. Kim, S. H. Lee, C. H. Lim, B. K. Ahn, and C. J. Kim, "Analysis of mass transport in PEMFC GDL", Trans. of the Korean Society of Mechanical Engineers, Vol. 36, No. 10, 2012, pp. 979-988. Retrieved from http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE01970256.
20 A. Jo and H. Ju, "Numerical study on applicability of metal foam as flow distributor in polymer electrolyte fuel cells (PEFCs)", Int. J. Hydrogen Energy, Vol. 43, No. 30, 2018, pp. 14012-14026, doi: https://doi.org/10.1016/j.ijhydene.2018.01.003.   DOI