• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.209-216
• /
• 1997

A feature is well known as a medium to integrate CAD, CAPP and CAM systems. For a part drawing including both simple geometry and compound geometry, a process plan such as the selection of process, machine tool, cutting tool etc. normally needs simple geometry data and non-geometry data of the feature as the input. However, a extended process plan such as the generation of process sequence, operation sequence, jig & fixture, NC program etc. necessarily needs the compound geometry data as well as the simple geometry data and non-geometry data. In this paper, we propose a feature data model according to the result of analyzing necessary data, including the compound geometry data, the simple geometry data and the non-geometry data. Also, an example of the feature data model in milling process planning is described.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.66-73
• /
• 1999

To enhance machining efficiency, tool exchange time have to be reduced. Most automatic tool changer is made up of compound cam and motor. it is not easy to design and manufacture compound cam, and it has no flexibility. But if servo motor is used, it is easy to changer is developed with servo motor, clutch, ball-screw and spline nut. Experimental results show that automatic tool changer designed with servo motor have good faculties.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.559-562
• /
• 2000

Bending is one of the most common cold-stamping operations, recently it is many used to produce structural frame. Depending on the shape and dimensions of complex structural frame, a successive bending operation with simple dies may be economic. But, in this paper, it has been focused to reduce the bending operations by a successive-action compound die. Designed compound-die consists of blank-holder, cam, wedge and etc. In the result, this compound-die for structural frame enabled that it makes seven bending processes into one process, and improved productivity.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.125-132
• /
• 2002

We use a compound-cam twin arm structure and random tool access method to achieve a faster ATC (Automatic Tool Changer) system for the accurate position and rotation control of a tool magazine and an exchange am. Based on the data obtained from various sensors, it is possible to follow the sequence of commands in each control step for an exchange arm. However, it is not so easy to reduce the exchange time of the system because of the slow responses of the sensors and execution mode delays of PLC (Programmable Logic Controller) scan time. In this paper, we propose a new programmed limit-switch position control method to obtain the shortest possible delays for the random tool access method and compound-cam twin arm structure. With some experimental results, we have achieved below 0.9sec tool exchange time with the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.55-60
• /
• 2013

Compound bows use levering systems consisting of cables and cam pulleys to bend limbs that are much stiffer than those of recurve bows, thus storing more energy while requiring less force for the archer to hold the bow at a fully drawn position. Many patents have thus far been proposed to improve the efficiency and performance of compound bows through empirical methods, whereas only a few analytical methods have been proposed. In this light, this paper presents a method for the kinematic analysis of levering systems in compound bows so that a designer can easily predict the effects of changes in the cam profiles and limb materials.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.100-108
• /
• 1989

Thirty-six aromatic compound biodegraders; 10 strains for benzoate, 10 for salicylate, 6 for m-toluate, and 10 for DL-camphor were isolated and taxonomically characterized. A mutant Pseudomonas strain, Ben 6-2, derived from Ben 6 revealed remarkably improved ability to metabolize benzoate. Thus enhancement of the average substrate removal rate from 5.2 to 11.0mg/$\ell$/ hr was attained by the mutant. Both of strains Sal 7 and Tol 2, degraders of salicylate and m-toluate respectively, were classified as Pseudomonas sup. Both strains were found to be extremely effective in metabolizing each aromatic substrates. The average substrate degradation rates in minimal salt media containing 2,200mg/$\ell$ of the substrate were calculated to be 40.1 mg/$\ell$/ hr for strain Sal 7 and 33.0mg/$\ell$/ hr for Tol 2. Cam 10, a camphor degrading strain was demonstrated to be capable of mineralizing benzoate, phenol, toluene, octane, cyclohexane and xylene as well as camphor. Strain 1040 isolated from Cam 10 after repented adaptation to 1,000 mg/$\ell$ m-toluate gained the ability to utilize toluate as a sole carbon source. The mutant Brew actively at the expense of a mixture of car-bon sources; camphor, m-toluate, benzoate and phenol (each: 200 mg/$\ell$) and utilized the substances in the preferential order of camphor, phenol, benzoate, and m-toluate. Among the biodegraders examined Cam 1040 and Tol 2 were detected to harbor plasmid. The plasmid from Cam 1001 was determined to be about 98kb, and evidenced to encode the enzyme(s) for the degradation of camphor. For the further diversification of the metabolic potentials of Cam 1040, the NAH 2 plasmid of Pseudomonas putida NCIB 9816 was transferred to Cam 1040 by conjugation. The exconjugant obtained, Cam 1043, proved to gain an additional ability to metabolize salicylate and naphthalene.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1991.10a
• /
• pp.362-375
• /
• 1991

Background and Necessity of the study : For more than 20 years, the soil engineering reserach group of Chonnam National University has been performing the deformation analysis of soft clayey foundation, since the University is located near the south-western coast of Korean Peninsulla, along which tide reclamation works have been under proaressing. Associsted with the fact mentioned above, the researchers have been developing a computer program in order to carry out deformation analysis of soft foundation since early 1980. Case-studies : In this research, the Biot's equation was selected as the governing equation coupled with several constitutive models including original and modified Cam-clay models, elasto-viscoplastic model, Lade's model etc. The anisotropy of soi1 can be considered in this program. To validate the accuracy of the computer program developed a couple of case-studies were performed. These include the pilot banking, sand drain considering smear effect and compound foundation reinforced with sheet pile into soft foundation.i) The pilot banking Good results could be acquired by assuming banking load as the body force composed of finite element mesh rather than equivalent concentrated load.ii) The sand drain Due to smear, the delay of consolidation was remarkable at the early stsge. so safety for the failure of foundation should be checked for the initial step of consolidation. iii) The compound foundation Accurate results were obtained by introducing the joint element method for the soft foundation reinforced with sheet pile into soiㅣ.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.74-84
• /
• 1994

This paper discusses a method to generate the tool path for NC machining of automobile panel dies. The source data representing a panel die may be generated from digitizing machines, other CAD/CAM systems via IGES files, of compound surface models. From the source data, three types of interferencefree tool paths are generated automatically ; a parallel (Cartesian), an isometric, and a pencil cutting tool path. For the interference-free tool path, a polyhedral model composed of several triangles, and an 'offset triangle' approach are exploited. Finally, some practical examples are illustrated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.105-112
• /
• 1999

In this paper we deal with tool interference problem in the case of compound surface machining. A new tool interference detection and correction method based on the envelope of the tool path is suggested to identify and correct the tool interference - not only within the local path of tool movement, but also outside of the tool path. Therefore, the developed strategy can be used to check the possible interference in any region of the surface. In order to analyze quantitatively the milled surface error produced by the tool interference, improved surface prediction model is also suggested in cutting process by general cutters. The effectiveness of the proposed method is demonstrated through simulation study.

• Biomolecules & Therapeutics
• /
• v.17 no.4
• /
• pp.422-429
• /
• 2009

Invasion and metastasis is the main cause of cancer mortality. Angiogenesis is a prerequisite for the tumor growth and metastasis. Matrix metalloproteinases (MMPs) are the key enzymes playing in the invasive growth and metastasis of cancer as well as angiogenesis. Xanthohumol, a prenylated chalcone of the Hop plant (Humulus lupulus L), has been reported to suppress cancer invasion and angiogenesis. In the present study, we investigated the antiinvasive effects of xanthohumol (1) and its synthetic derivatives, 4'-O-methylxanthohumol SEM ether (2), xanthohumol C (3), and xanthohumol C MOM ether (4) in relation to MMP expression in HT-1080 human fibrosarcoma cells. The compound 1 and its derivative, 3 and 4, significantly inhibited serum-induced HT-1080 cell invasion, and 12-O-tetradecanoylphorbol-13-acetate (TPA)-enhanced activity and expression level of MMP-2 and MMP-9 in a concentration-dependant manner. In addition, they inhibited TPA-enhanced expression of MT1-MMP with relatively weak inhibition in tissue inhibitor of metalloproteinase (TIMP)-1 and TIMP-2 level. The compound 1 significantly decreased the cell viability, whereas the derivatives, 2 and 3 showed no cytotoxicity, and compound 4 showed slight cytotoxicity in the cells. Furthermore, in a chick chorioallantoic membrane (CAM) assay, the derivatives 3 and 4 dose-dependently suppressed vascular endothelial growth factor (VEGF)-induced angiogenesis, which is similar to that of compound 1. Taken together, the results indicate that compounds 3 and 4 may be valuable anti-angiogenic agents in the treatment of chronic diseases such as cancer and inflammation working through suppression of MMP-2 and MMP-9.