• 제목/요약/키워드: Compound Angle

검색결과 151건 처리시간 0.033초

혼합하중 조건하에서 갈색산화물이 입혀진 구리계 리드프레임/EMC 계면의 파손경로 (Failure Path of the Brown-oxide-coated Copper-based Leadframe/EMC Interface under Mixed-Mode Loading)

  • 이호영
    • 한국표면공학회지
    • /
    • 제36권6호
    • /
    • pp.491-499
    • /
    • 2003
  • Copper-based leadframe sheets were oxidized in a hot alkaline solution to form brown-oxide layer on the surface and molded with epoxy molding compound (EMC). The brown-oxide-coated leadframe/EMC joints were machined to form sandwiched double-cantilever beam (SDCB) specimens and sandwiched Brazil-nut (SBN) specimens for the purpose of measuring the fracture toughness of leadframe/EMC interfaces. The SDCB and the SBN specimens were designed to measure the fracture toughness of the leadframe/EMC interfaces under nearly mode-I loading and mixed-mode (mode I + mode II) loading conditions, respectively. Fracture surfaces were analyzed by various equipment such as glancing-angle XRD, SEM, AES, EDS and AFM to elucidate failure path. Results showed that failure occurred irregularly in the SDCB specimens, and oxidation time of 2 minutes divided the types of irregular failures into two classes. The failure in the SBN specimens was quite different from that in the SDCB specimens. The failure path in the SBN specimens was not dependent on the phase angle as well as the distance from tips of pre-cracks.

4:1 종횡비를 갖는 가스터빈 블레이드 냉각 유로에서의 립-딤플 복합 냉각 특성 연구 (Rib-Dimple Compound Cooling Techniques in a Gas Turbine Blade Cooling Channels with an Aspect ratio (4:1))

  • 최용덕;김석범;이용진;김진곤;곽재수
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.304-310
    • /
    • 2010
  • 본 연구에서는 딤플이 설치된 유로, 립이 설치된 유로, 립과 딤플이 함께 설치된 유로에서의 열전달 성능을 천이액정법을 이용하여 측정하였다. 실험에 사용된 유로의 종횡비(W/H)는 4이고, 립의 높이는 6 mm, 립 간 거리(P/e)는 10, 립이 설치된 각도는 $60^{\circ}$이며, 딤플의 직경은 6 mm, 딤플 중심간 거리(s/D)는 1.2로 하였다. 레이놀즈 수는 30000-50000에 대해 실험을 수행하였다. 립이 설치된 유로에서는 경사 립에 의해 발생된 이차유동이 열전달 계수를 증가시켰고, 립과 딤플이 함께 설치된 유로에서는 립 사이에 설치된 딤플이 열전달 계수를 더욱 증가시켰다. 열전달계수는 립과 딤플이 복합 적용된 유로, 립이 적용된 유로, 딤플이 적용된 순으로 나타났고, 열성능계수도 립과 딤플이 복합 적용된 유로에서 크게 나타났다.

  • PDF

PDMS (Polydimethylsilioxane)-Coated Silica Nanoparticles for Selective Removal of Oil and Organic Compound from Water

  • Cho, Youn Kyoung;Kim, Dae Han;Yoon, Hye Soo;Jeong, Bora;Kim, Young Dok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.257-257
    • /
    • 2013
  • In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

  • PDF

4:1 종횡비를 갖는 가스터빈 블레이드 냉각 유로에서의 립-딤플 복합 냉각 특성 연구 (Rib-Dimple Compound Cooling Techniques in a Gas Turbine Blade Cooling Channels with an Aspect ratio (4:1))

  • 최용덕;김석범;이용진;김진곤;곽재수
    • 한국추진공학회지
    • /
    • 제14권4호
    • /
    • pp.32-38
    • /
    • 2010
  • 본 연구에서는 딤플이 설치된 유로, 립이 설치된 유로, 립과 딤플이 함께 설치된 유로에서의 열전달성능을 천이액정법을 이용하여 측정하였다. 실험에 사용된 유로의 종횡비(W/H)는 4이고, 립의 높이는6 mm, 립 간 거리(P/e)는 10, 립이 설치된 각도는 $60^{\circ}$이며, 딤플의 직경은 6 mm, 딤플 중심간 거리(s/D)는 1.2로 하였다. 레이놀즈 수는 30000-50000에 대해 실험을 수행하였다. 립이 설치된 유로에서는 경사 립에 의해 발생된 이차유동이 열전달 계수를 증가시켰고, 립과 딤플이 함께 설치된 유로에서는 립 사이에 설치된 딤플이 열전달 계수를 더욱 증가시켰다. 열전달계수는 립과 딤플이 복합 적용된 유로, 립이 적용된 유로, 딤플이 적용된 순으로 나타났고, 열성능계수도 립과 딤플이 복합 적용된 유로에서 크게 나타났다.

CPV모듈의 2차 광학계 특성에 따른 성능분석 (Performance Analysis of CPV Modules for Optimizing Secondary Optical Elements)

  • 박점주;정병호;박주훈;이강연;김효진
    • 한국태양에너지학회 논문집
    • /
    • 제40권5호
    • /
    • pp.23-34
    • /
    • 2020
  • Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

수종 나자식물의 잎 수용 추출액이 무궁화의 품종별 종자발아와 유식물 및 초기생장에 미치는 영향 (Effect of Leaf Aqueous Extracts from Some Gymnosperm Plant on the Seed Germination, Seedling Growth and Transplant of Hibiscus syriacus Varieties)

  • 배병호;김용옥
    • The Korean Journal of Ecology
    • /
    • 제26권1호
    • /
    • pp.39-47
    • /
    • 2003
  • 나자식물 5종의 잎 수용 추출액과 무궁화 4품종간의 allelopathy 현상을 조사하였다. 이들 수용 추출액의 총 phenolic compound 함량은 리기다소나무가 2.21 mg/L, 그리고 생육지의 수관 내 토양 총 phenolic compound 함량은 잣나무가 1.38 mg/L로 가장 높았다. 그리고 HPLC를 이용하여 phenolic compound의 성분을 분석한 결과 14종을 확인하였고, 그 중 리기다소나무의 phenolic compound함량은 320.56 g/mg으로 가장 높았으며 특히 5-sulfosalicylic acid가 312.55 g/mg로 분석되었다. 수용 추출액의 총 phenolic compound 함량과 pH와는 상관관계가 없었으나 총 phenolic compound는 공여체 식물의 수관내 토양 pH에 변화를 보이고 있다. 무궁화의 종자발아 실험에서 수용 추출액의 임계농도는 25%였으며 이 경우 잣나무의 수용 추출액은 4품종의 상대종자발아율이 대조구와 유사하거나 약간의 발아 촉진현상이 나타났고, 도입종인 캄판화 종자는 모든 수용추출액의 처리구에서 대조구보다 촉진되었다. 또한 유식물 생장에서 서호향은 대조구보다 처리구의 지상 및 지하부의 생장이 모두 촉진되었으며 그 외 품종들의 지상부 생장은 대조구와 유사하고 지하부는 촉진되었다. 또한 실외의 초기생장에서 서호향은 대조구보다 처리구에서 촉진되었고 그 외 품종은 대조구와 유사하거나 감소하고 건중량은 서호향이 모든 처리구에서 대조구보다 촉진되었고 그 외의 품종은 대부분 대조구보다 억제되었다. 엽록소의 함량은 대조구와 비교하여 고요로와 서호향의 품종에서 약간의 촉진현상이 있었으나 그외에서는 유의한 차이가 없었다. 그러므로 5종의 나자식물 수용 추출액은 무궁화의 4품종 중에서 서호향은 생장의 촉진을, 그리고 다른 품종들은 억제 시키는 경향을 보이는 것으로 나타났다.로그램이 다양하지 못하였다. 그러므로 효율적인 사별관리를 위해 사별관리 프로그램이 개발되어야 하며 관리운영자의 전문적인 교육과 봉사자 교육 및 훈련이 있어야 하고 사별자의 개별성과 요구에 적합한 접근방법이 모색되어야 한다. 앞으로 한국실정에 맞는 토착화된 사별관리를 위한 다각적인 연구가 시도되어야 하며 이를 실무에 적용시켜야 한다.ssumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.부정적인 반응을 보였다. '한국음식을 더 많이 해서 전통음식과 친밀한 장소로 발전시키자', '계절식품을 이용하고 비슷한 종류의 음식은 빼서 가격을 낮추자', '연령에 따라서, 또, 성인에서는 성별에 따라 가격 차이를 두자'는 의견 등이 있었다.이용한 배반포의 체외생산에 있어서 배양액내 항산화제의 첨가는 체외성숙단계에서만 효과적이었다. 이것은 아마도 항산화제가 체외성숙 시 난포란 내에서 일어나는 여러 가지 생화학 반응의 처리시간과 관련하여 활성화시킴으로써 난포란의 생존력을 높인 것이라고 사료되기 때문에 앞으로는 돼지 난포란의 효율적인 체외성숙에 대해서 배양액내 첨가물질은 물론 나아가서 방법론적인 측면에서 더욱 연구되어져야 할 것이다.ed from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon. The

Structure of an Organotitanoxane Containing a Tetrahedral $Ti_{4}O_{6}$ Cage, $C_{40}H_{60}O_{6}Ti_{4}$

  • Kim, Young-Sang;Ko, Jae-Jung;Kang, Sang-Ook;Kim, Tae-Jin;Han, Won-Sik;Suh, Il-Hwan
    • 한국결정학회지
    • /
    • 제16권2호
    • /
    • pp.102-106
    • /
    • 2005
  • The crystal structure of the title compound has been analyzed by single crystal X-ray diffraction method. The compound crystallized in the triclinic space group $P\bar{1}$ with a=11.300(6) ${\AA}$, c=18.716(10) ${\AA}$, ${\alpha}=82.833(10)^{\circ}$, ${\beta}=83.042(11)^{\circ}$, ${\gamma}=66.139(10)^{\circ}$, $V=2162(2)\;{\AA}^{3}$, Z=2 and R1=0.661 for 10578 unique reflections. The four $C_{5}Me_{5}$ planar groups from a tetrahedron with a mean dihedral angle $70.92(9)^{\circ}$ among them and the $Ti_{4}O_{6}$ cage sits at the center of the tetrahedron. Each Ti atom in the $Ti_{4}O_{6}$ cage is bonded by three bridging oxygen atoms and coordinated by a $C_{5}Me_{5}$ ligand with a mean distance $2.067{\AA}$ from Ti atoms to the centroids of the four five-membered rings. Two oxygen atoms facing each other in $Ti_{4}O_{6}$ cage are $4.051(3){\AA}$ away in average.

자동회전의 성능해석(2) : 고속 자동회전의 성능 (Performance Analysis of Autorotation(2) : Performance of High Speed Autorotaion)

  • 김학윤
    • 한국항공우주학회지
    • /
    • 제40권1호
    • /
    • pp.12-22
    • /
    • 2012
  • 샤프트각이 감소하며 비행 속도가 증가하는 자동회전 상태의 로터에 대한 성능 변화를 해석하였다. BO-105 헬리콥터의 로터에 비틀림이 없는 NACA 0012 단면을 가지는 깃을 해석하였고 변수에 대한 자동회전의 영역을 구하기 위해 과도모사법(TSM)이 사용되었다. 고속 비행에서 압축성 효과를 모사하기 위해 압축성 Navier-Stokes 솔버로 해석된 2차원 공력 데이터가 사용되었으며 유도 속도장을 모사하기 위해 Pitt/Peters의 유도속도 이론이 사용되었다. TSM으로 구해진 정상 자동회전 상태에 대하여 추력계수와 양력계수, 양항비를 계산하였으며 로터의 양력과 동력을 구하여 BO-105 헬리콥터와 비교하였다. 복합 항공기의 개념을 도입할 때 자동회전하는 로터와 날개의 양력 및 동력 분담률을 고찰하였다.

Ring Flipping of Seven-membered and Eight-membered Dithienodisila-heterocycles

  • Lee, In-Sook;Kwak, Young-Woo;Ghosh, Manikkumer;Ohshita, Joji;Choi, Cheol-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권2호
    • /
    • pp.377-380
    • /
    • 2008
  • Ground state structures and ring flipping transition states of eight- and seven-membered silicon containing heterocyclic compounds such as dithienodisilacyclooctatriene and oxadithienodisilacycloheptadiene derivatives, respectively have theoretically been investigated. Although the bithienylene moiety of the derivatives does not change the ground state structures, they significantly increase the ring flipping barrier by 13-17 kcal/mol in the case of the eight-membered rings (2, 3, and 4) in comparison with that of silicon containing heterocyclic compound 6, chosen as a model. The same moiety increases the flipping barrier of seven-membered ring (5) is only slightly (3.3 kcal/mol) in comparison with that of model compound 7. Hence, it has been concluded that not only the existing ring strain of eight-membered ring but also the bithienylene moiety collectively increases the ring flipping barrier so as to prevent such conformational changes explaining anomalous NMR behaviour of dithienodisilacyclooctatriene derivatives (2-4). In contrast, the effect of substituents R1 and R2 at the olefinic carbons of the eight-membered ring on the flipping barrier turned out to be mild.

열처리된 A3003 알루미늄합금 용접부의 미세조직 및 기계적 특성 (Microstructrue and Mechanical Properties of A3003 Aluminium Alloy Welds by Heat-treatment)

  • 이일천;송영종;국진선;윤동주;김병일
    • Journal of Welding and Joining
    • /
    • 제25권5호
    • /
    • pp.51-57
    • /
    • 2007
  • The present work was aimed to examine the variation of microstructure and mechanical properties by annealing($100{\sim}620^{\circ}C$, $2{\sim}8hr$) in A3003 Al alloy welded pipes. The A3003 Al alloy pipes with 34 mm in external diameter and 1.3 mm in thickness were manufactured by high frequency induction welding with the V shaped convergence angle $6.7^{\circ}$ and power input 50 kW. The tensile and yield strength decreased with increasing the annealing temperature remarkably, but elongation increased remarkably. Vickers hardness in welds decreased with increasing the annealing temperature remarkably. The primary intermetallic compound of $Al_{12}(Fe,\;Mn)_2Si$ was precipitated in welds as the same base metal. In a certain experimental condition, the welds line in A3003 alloys disappeared at $450^{\circ}C$ for 2 hr because of the same mechanical property and structure between welds and base metal.