• Macromolecular Research
• /
• v.15 no.1
• /
• pp.74-81
• /
• 2007

A series of photoreactive mesogens based on chalcone were prepared and their morphological behavior and reactivity were studied according to a variable number of alkyloxy tail carbons. The linear ester compounds 3a-h comprised two chalcone units connected to a benzene ring through ester linkages. All linear ester compounds showed enantiotropic liquid crystalline phases. The X-ray diffractograms for the mesophases of compounds 3a-h showed a set of reflections in the small-angle region which consisted of more than three sharp diffraction peaks with d spacings in the ratio of 1:1/2:1/3, confirming the well defined smectic A structures of the compounds. Compounds 3a-h were considered to be bifunctional monomers due to the presence of two photoreactive chalcone groups. Upon UV irradiation, its polymerization proceeded through the [2+2] addition reaction between chalcone units in a stepwise manner. An image pattern was obtained by the photopolymerization of the liquid crystal of the compound (3h) with decyloxy tails through a photomask. The irradiated part became dark while the masked part remained birefringent under polarized optical microscopy, which was ascribed to the production via the UV irradiation of a polymer or a dimer having cyclobutane rings by [2+2] addition, which thereby disrupted the alignment of the molecules.

• Elastomers and Composites
• /
• v.34 no.5
• /
• pp.407-413
• /
• 1999

Non-ceramic composite insulator has been interested in the power industry because of its good characteristics in mechanical properties, mass product and design availability. Also it is lighter, and less unexplosive, compared to a ceramic insulator. Especially EPDM rubber composite insulator can be used for long-term in contaminated environments because of its hydrophobicity. This paper showed the rheological properties, the electrical properties, and contact angles to check the hydrophobicity and the recoverability of the EPDM compounds. Also, we investigated surface morphology of the compound by SEM.

• Progress in Superconductivity
• /
• v.12 no.2
• /
• pp.99-103
• /
• 2011

We performed angle resolved photoelectron spectroscopy (ARPES) studies on Ru doped $BaFe_2As_2$ with various Ru contents. Ru, which is doped into a parent compound $BaFe_2As_2$ and substitute Fe, does not donate or accept electrons. However, it induces superconductivity. From ARPES data along the high symmetry cuts and Fermi surface maps, we investigate the electron correlation and carrier density at the Fermi level. We observe that the Fermi velocity increases with Ru doping, suggesting reduction in electron correlation. In addition, we address issues on local vs. itinerant pictures for the magnetism in $BaFe_2As_2$.

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.178-183
• /
• 2012

Two $RuSr_2(EuCe)Cu_2O_z$ samples (as prepared and after $N_2$ treatment) have been investigated by thermogravimetric (TC) analysis, high-resolution x-ray powder diffraction and magnetization measurements. TG measurements which were carried out in $H_2/Ar$ atmosphere showed that the $N_2$ treatment of the as-prepared sample at $650^{\circ}C$ for 2h leads to a decrease in the oxygen content z by about 0.25. This oxygen depletion was accompanied by an increase in the magnetic transition temperature from 54.0 K to 114.9 K. This magnetic behavior is discussed in connection with the results of Rietveld analysis of the x-ray diffraction data which showed that the $N_2$ treatment resulted in both a significant increase in the rotation angle of the $RuO_6$ octahedra and a decrease in c-lattice parameter of the sample.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.2
• /
• pp.91-97
• /
• 2009

The performance of GaInP/GaAs tandem solar cells with AlInP growth temperatures of 680$^{\circ}C$ and 700 $^{\circ}C$ on n-type GaAs (100) substrate with 2$^{\circ}$ and 6$^{\circ}$ tilt angles has been investigated. The series resistance and open circuit voltage of the fabricated tandem solar cells are affected by the substrate tilt angles and the growth temperatures of the window layer when zinc is doped in the tunnel diode. With carbon doping as a p-type doping source in the tunnel diode and the effort of current matching between top and bottom cells, GaInP/GaAs tandem solar cell has been exhibited 25.58% efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.175-182
• /
• 2000

(A hybrid-type wireless infrared data communication module was fabricated by using the light emitting andabsorption diodes with the one-chip of integrated digital circuits. The light emitting diode with the peak spectrum of 850 nm was made from compound semiconductor material of AIGaAs and shows high speed signal transmission with the delay time of 60 nsec for the light direction angle of 30". The Si PIN photodiode showsthe good absorption rate for the range of wavelength of 450-1050 nm and convex-type epoxy lens was utilized for the spectrum filtering on the visible-range spectrum below 750 nm, The data transmission speed is 115.2 kbps and the fabricated module satisfies on the IrDA 1.0 SIR standard requirements.)ments.)

• Journal of Surface Science and Engineering
• /
• v.32 no.6
• /
• pp.647-657
• /
• 1999

Due to the inherently poor adhesion strength of Cu-based leadframe/EMC (Epoxy Molding Compound) interface, popcorn cracking of thin plastic packages frequently occurs during the solder reflow process. In the present work, in order to enhance the adhesion strength of Cu-based leadframe/EMC interface, black-oxide layer was formed on the leadframe surface by chemical oxidation of leadframe, and then oxidized leadframe sheets were molded with EMC and machined to form SDCB (Sandwiched Double-Cantilever Beam) and SBN (Sandwiched Brazil-Nut) specimens. SDCB and SBN specimens were designed to measure the adhesion strength between leadframe and EMC in terms of critical energy-release rate under quasi-Mode I ($G_{IC}$ ) and mixed Mode loading ($G_{C}$ /) conditions, respectively. Results showed that black-oxide treatment of Cu-based leadframe initially introduced pebble-like X$C_2$O crystals with smooth facets on its surface, and after the full growth of $Cu_2$O layer, acicular CuO crystals were formed atop of the $Cu_2$O layer. According to the result of SDCB test, $Cu_2$O crystals on the leadframe surface did not increase ($G_{IC}$), however, acicular CuO crystals on the $Cu_2$O layer enhanced $G_{IC}$ considerably. The main reason for the adhesion improvement seems to be associated with the adhesion of CuO to EMC by mechanical interlocking mechanism. On the other hand, as the Mode II component increased, $G_{C}$ was increased, and when the phase angle was -34$^{\circ}$, crack Kinking into EMC was occured.d.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1251-1260
• /
• 2008

Diffuse wireless optical communication offers more robust optical links in terms of coverage and shadowing than line-of-sight links. However, traditional diffuse wireless infrared (IR) transceiver systems are more susceptible to multi-path distortion and great power decrease, which results in limiting high-speed performance. Multi-beam is an effective technique to compensate for multi-path distortion in a wireless infrared environment. The goal of this paper is to analyze the transmission characteristics by replacing traditional diffuse system (TDS) which contains single wide angle transmitter and single element receiver by system consisting of three-beam transmitter and non-imaging receiver (TNS) attached with compound parabolic concentrator (CPC). In the simulation, we use the recursive model developed by Barry and Kahn and build the scenario based on 10 different cases which have been listed in Table 1. Moreover, we also check the reliability of the TNS diffuse link channel by BER test on the basis of different receiver positions and room sizes. The simulation results not only show the basic transmission characteristics of TNS diffuse link, but also are references to design more efficient and reliable indoor infrared transmission systems.

• Membrane Journal
• /
• v.4 no.1
• /
• pp.57-62
• /
• 1994

This study uses pervaporation process to separate small amount of organic trichloroethylene, chloroform and perchloroethylene from contaminated water, since chlorinated hydrocarbones are known to be cancer suspecting compounds. For the separation of small amount of halogenated organic compound dissolved in wastewater, pervaporation membranes should be polymers that possess affinity with orgnic compounds and hydrophobicity. We used polyisobutylene, polyetheramide and polydimethylsiloxane membranes. The degree of affinity between organics and polymers were measured by contact angle method. We had good separation results that separation factor ranged from 34 to 19100 and permeate flux was$19.7~140g/m^2hr$.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.55-59
• /
• 1996

The crystal structure of diflunisal, 2',4'-difluoro-4-hydroxy-3-biphenyl-carboxylic acid, was determined by single crystal X-ray diffraction technique. The compound was recrystallized from a mixture of acetone and water in monoclinic, space group C2/c, with $a\;=\;34.666(6),\;b\;=\;3.743(1),\;c\;=\;20.737(4)\;{\AA},\;{\beta}=\;110.57(2)^{\circ}$, and Z = 8. The calculated density is $1.324\;g/cm^3$. The structure was solved by the direct method and refined by full matrix least-squares procedure to the final R value of 0.045 for 1299 observed reflections. It was found that the molecules in the crystal are partially disordered, that is, the two equivalent conformers $(180^{\circ}$ rotated ones through C(1)-C(7)) are packed alternatively without regular symmetry or sequence. The two phenyl rings of the biphenyl group is tilted to each other by the dihedral angle of $43.3^{\circ}$. The carboxyl group at the salicylic moiety is just coplanar to the phenyl ring, and the planarity of this salicylic moiety is stabilized by an intramolecular hydrogen bond of O(3)-H(O3) O(2). The molecules are dimerized through the intermolecular hydrogen bonds at the carboxyl group in the crystal.