최근 들어 미세먼지에 의한 건강위해성에 대한 많은 문제가 지적되고 있다. 따라서 서울지역은 미세먼지를 줄이기 위한 합리적인 대책과 해결방안이 시급한 실정이다. 미세먼지의 악영향을 줄이기 위해서 우선 미세먼지의 구성성분 중 비율이 가장 많은 이온성분에 대한 명확한 해석이 선결되어야 하고, 이를 바탕으로 미세먼지의 특성을 파악하여 효과적인 저감 대책 수립 및 실천이 진행되어야 한다. 미세먼지 중 이온성분에 대한 물리화학적 특성을 해석하기 위하여 먼저 서울지역에서 미세먼지를 필터에 채취하고 이온성분 분석을 하였다. 그리고 이온크로마토그래피(IC)로 분석이 되지 않는 수소이온($H^+$)과 탄산이온${CO_3}^{2-}$)은 pH와 음이온과 양이온의 당량비 차이로 농도를 추정하였다. 질량수지를 기본원리로 하는 수학적 모델링 적용 결과 음이온과 양이온의 결합형태를 도출할 수 있었다. 미세먼지의 결합에 사용된 이온은 IC로 분석한 8개 이온과 추가로 해석한 $H^+$, ${CO_3}^{2-}$이며, 본 연구에서 나온 존재형태는 $NH_4Cl$, $NH_4NO_3$, $CaSO_4$, $(NH_4)_2SO_4$, $NaNO_3$, NaCl, $Na_2CO$, 그리고 $(NH_4)_2CO_3$ 등이 주를 이루고 있는 것으로 추정되었다.
배추의 성분조성 및 조직감의 변화에 대한 염장효과에 대하여 연구하였다. 최적 염장조건을 알아보았으며 원료배추 및 염장배추의 dietary fiber 성분조성 무기질 함량 및 수분함량을 측정하였다. 배추의 조직감은 Rheometer에 의한 cutting test에 의하였으며 아삭아삭한 성질 및 씹힘성은 관능검사에 의해 평가되었다. 배추절임을 위한 최적조건은 절임농도가 20%, 절임시간은 6시간이었다. 배추를 20% NaCl용액에서 한달간 염장에 의한 성분변화에 있어서 HW-P는 43.6%에서 59.5%로 증가하였으며 HM-P는 35.9%에서 29.5%로 감소하였다(P<0.05). 그러나 전체 펙틴함량은 거의 변화하지 않았다. 셀룰로오즈, 헤미셀룰로오즈의 함량은 증가하였으나 리그린 함량은 감소하였는데 유의적인 차이는 없었다. Na함량은 현저히 증가하였으나 Ca, Mg, 및 K 함량은 감소하였다. 또한 수분함량은 91%에서 79%로 감소하였다(p<0.05). 배추를 20% NaCl용액에서 한달간 염장에 의한 조직감의 변화에 있어서 최대절단력 및 절단면적은 각각 5배 및 2.5배로 증가하였으며 관능검사 결과 씹힘성은 높아졌으나 아삭아삭한 성질은 낮아졌다(P<0.05). Rheometer에 의한 조직감 parameter와 높은 상관관계를 나타내었다. 이상의 결과로부터 배추를 20% NaCl 용액에서 한달간 염장과정 중 조직감의 변화는 펙틴질 함량, 수분함량 및 무기질 함량의 변화와 관련이 있으나 셀룰로오즈, 헤미셀룰로오즈 및 리그린 함량과는 비교적 관련이 없는 것으로 나타났다. 또한 cutting test에 의한 최대 절단력이 배추의 조직감을 표현하는 좋은 방법이라고 생각되어진다.
Serpentinite of the Yesan-Gongju-Cheongyang area has been formed by serpentinization of ultramafic rocks. The ultramafic rock might be composed mainly of oilvine with minor pyroxene and amphibole. Olivine has a considerably restricted chemical compositional ranging from Fo90 to Fo93. Fresh serpentinite containing large amount of oilvine is usually massive in occurrence and dark green to black in color. Serpentine minerals occur not only as major mineral of serpentinite, but also as remnants in the talc ore which was formed from serpentinite. XRD study indicates that antigorie is the most abundant serpentine mineral of the serpentinite. Serpentinite consisting of antigorite usually shows non-pseudomorphic texture, whereas that consisting of lizardite shows pseudomorphic texture. Antigorite is found along the margins or fractures of olivine grains resulting in the formation of network of magnetite which was formed at the time of serpentinization. Lizardite, subordinate constituent mineral of serpentinite, frequently shows pseudomorphic mesh-texture after olivine. The chemical differences between antigorite and lizardite/chrysotile are small, so both minerals are not easily discernible with the electron microprobe. Antigorite occuers as elongate blades, flakes, or plates forming interpenetrating texture to obliterate previous textures. SEM study also shows that most serpentine minerals occur in platy or tabular form rather than in asbestiform. Fractures formed after main serpentinization are observed within the pseudomorphic central olivine grain. Careful observation of the serpentine pseudomorphs gives a great deal of data on the pre-serpentinization nature of the serpentine pseudomorphs gives a great deal of data on the pre-serpentinization nature of the ultramafic rocks. It is inferred that the serpentinization took place after the emplacement of ultramafic body into the relatively wet environment ceased and the cooling intrusive body crossed into the stability field of serpentine. It is inferred that the final pervasive serpentinization took place over a long time, by hydrothermal water supplied through the fracture system produced during emplacement of ultramafic rock.
Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.
The introduction of genetically modified crops has raised concerns regarding safety issues over the insertion of foreign genes into plant genomes using recombinant DNA technology. Since 1991 in Japan, 29 foods and 6 food additives have been evaluated, based on the "Guideline for Safety Assessment", before these foods were marketed. The MHW, however, decided that safety assessment of such foods and food additives should be legally imposed. because soon such foods and food additives are expected to circulate globally and a new system for assessing safety of such foods and food additives at a pre-market stage is necessary, in order to avoid the distribution of any genetically modified foods that have had no safety assessment. The MHW published relevant announcements to amend existing regulations on 1 May 2000. "Standards for safety assessment of seed plant" is established based on a concept of substantial equivalence, and applicable to the products which are regarded as equivalent to the existing products used as foods and food additives. The characterization of the food products entails consideration of the molecular characterization. phenotypic and compositional characteristics, key nutrients and toxicants, and toxicity and allergenicity of the introduced proteins, and if there are indications of unintended effects of the modification, whether further safety testing (animal studies etc.) is needed should be considered. Safety and wholesomeness studies with whole foods should be care fully designed in order to avoid nutritional imbalances causing artifacts and uninterpretable results as was the case of Dr. Pusztaiis report. A case study of genetically modified soybeans (glyphosate-tolerant soybeans) on the immune system of rats and mice is shown. Chemical compositions were also compared with those of the non-GM soybeans. The studies failed to detect any differences in immuno-toxic activity.muno-toxic activity.
Dietary lipid biomarkers (fatty acids, fatty alcohols, and sterols) in adult specimens were analyzed to compare and understand the feeding ecology of the euphausiid, Euphausia pacifica, from three geographically and environmentally diverse Korean waters (Yellow Sea, East China Sea, and East Sea). Total lipid content of E. pacifica from Korean waters was about 10% dry weight (DW) with a dominance of phospholipids (>46.9% of total lipid content), which are known as membrane components. A saturated fatty acid, C16:0, a monounsaturated fatty acid, C18:1(n-9), and two polyunsaturated fatty acids, C20:5(n-3) and 22:6(n-3), were most abundant (>60% of total fatty acids) in the fatty acid composition. Some of the fatty acids showed slight differences among regions although no significant compositional changes of fatty acids were detected between these regions. Phytol, originating from the side chain of chlorophyll and indicative of active feeding on phytoplankton, was detected all samples. Trace amounts of various fatty alcohols were also detected in E. pacifica. Specifically, krill from the Yellow Sea showed relatively high amounts of longchain monounsaturated fatty alcohols (i.e. 20:1 and 22:1), generally found in herbivorous copepods. Three different kinds of sterols were detected in E. pacifica. The most dominant of these sterols was cholest-5-en-$3{\beta}$-ol (cholesterol). The lipid compositions and ratios of fatty acid trophic markers are indicative of herbivory in E. pacifica from the Yellow Sea and East Sea (mainly feeding on dinoflagellates and diatoms, respectively). The lipid compositions and ratios of fatty acid trophic markers are indicative of carnivory or omnivory in E. pacifica from the East China Sea, mainly feeding on microzooplankton such as protozoa. In conclusion, lipid biomarkers provide useful information about krill feeding type. However, further analyses and experiments (i.e. gut content analysis, in situ grazing experiment, etc.) are needed to better understand the feeding ecology of E. pacifica in various marine environments.
Oh, Sung-Dug;Yeo, Yunsoo;Lee, So-Young;Suh, Sang Jae;Moon, Jung Kyung;Park, Soo-Kwon;Park, Soo-Yun
농업과학연구
/
제46권4호
/
pp.971-980
/
2019
We profiled the health-promoting bioactive components in nine types of soybean seeds with different seed coat colors (yellow, green, brown, and black) and investigated the effects of different extraction solvents (methanol, ethanol, and water) on their antioxidant activities. The carotenoid and anthocyanin compositions varied greatly by seed color, and the phenolic acids, total phenol, and total flavonoid contents differed by genotype. The carotenoid content was relatively higher in soybean seeds with green and black seed coats than in those with a yellow seed coat while lutein was the most plentiful. The anthocyanin content was considerably higher in the soybean seed with the black seed coat. The results of the DPPH assay showed strong antioxidative activities in the methanol- and water-extracts compared to the ethanol-extract, irrespective of the seed coat colors. Moreover, the soybean seeds with the black seed coat exhibited the highest antioxidant activity among the samples, regardless of the extraction solvent used. Eighteen bioactive compounds were subjected to data-mining processes including principal component analysis and hierarchical clustering analysis. Multivariate analyses showed that brown and black seeds were distinct from the yellow and green seeds in terms of the levels of carotenoids and anthocyanins, respectively. These results help our understanding of the compositional differences in the bioactive components among soybean seeds of various colors, providing valuable information for future breeding programs that seek to enhance the levels of compounds with health benefits.
Purpose: Dentin hypersensitivity is a potential threat to oral health. Laser irradiation may provide reliable and reproducible treatment but remains controversial. The present study aimed to evaluate the effects of $CO_2$ or erbium-doped yttrium aluminium garnet (Er:YAG) laser therapy, and to assess mineral content. Methods: Eighteen human single-rooted teeth affected with advanced periodontitis were obtained. Buccal and lingual surfaces were planed to form 36 specimens. Ethylenediaminetetraacetic acid gel (24%) was applied to remove the smear layer and simulate hypersensitive teeth. The experimental groups were: group 1, control (no irradiation); group 2, $CO_2$ laser (repetitive pulsed mode, 2 W, $2.7J/cm^2$); and group 3, Er:YAG laser (slight contact mode, 40 mJ/pulse and 10 Hz). To evaluate dentinal tubule occlusion, six specimens per group (2-mm thickness) were prepared and observed using scanning electron microscopy (SEM) for calculation of the occlusion percentage. To evaluate the mineral content, six specimens per group (0.6-mm thickness) were used, and then the levels of Ca, K, Mg, Na, and P were measured by inductively coupled plasma-atomic emission spectrometry. In addition, the surface temperature of the specimens during laser irradiation was analyzed by a thermograph. Results: The SEM photomicrographs indicated melted areas around exposed dentinal tubules and a significantly greater percentage of tubular occlusion in the $CO_2$ and Er:YAG laser groups than the control, and in the Er:YAG group than the $CO_2$ laser group. In addition, no significant differences were noted among the experimental groups for the mineral elements analyzed. The $CO_2$ laser group showed an evident thermal effect compared to the Er:YAG group. Conclusions: $CO_2$ and Er:YAG laser are effective in treating dentin hypersensitivity and reducing its symptoms. However, the Er:YAG laser has a more significant effect; thus, it may constitute a useful conditioning item. Furthermore, neither $CO_2$ nor Er:YAG lasers affected the compositional structure of the mineral content.
We have shown that the volcanic rocks from the northern part of Cheju Island can be divided into high $P_2O_5/K_2O$(HPK) and low $P_3O_5/K_2O$(LPK) groups, each with distinct geochemical characteristics(Park and Kwon, 1993a and b). This study reports mineral compositions for plagioc-lase, olivine, and clinopyroxene in order to see the dependence of mineral chemistry on the whole rock composition, and discusses equilibrium relationships between crystal and liquid. Plagioclase and olivine phenocrysts show no compositional differences for the two rock group. However, $Al^{ⅵ}/Al^{ⅳ}$ ratios of clinopyroxenes suggest that pyroxenes have fractionated at deeper level, and that the LPK group might have fractionated at higher pressure than the HPK group. These are in good agreement with our previous interpretation based on whole rock chemistry(Park and Kwon, 1993a). Although subhedral or euhedral form and homogenous composition for most plagioclase and clinopy-roxene phenocrysts suggest equilibrium relationship with liquid, the uncertainties associated with liquid, the uncertainites associated with equilibrium constant for these minerals do not allow testing equilibium relationship between mineral and liquid on the basis of chemistry. On the other hand, olivine phenocrysts in hawaiites, for which Kd is well known, show distinct nonequilibrium relationship with calculated liquid composi-tions, while those in other rock compositions are in equilibrium from those for other rocks. We report for the first time as far as we know plagioclase xenocryst and pigeonite inclusion in plagioclase, which indicates assimilation process. In conclusion, these mineralogical observations imply that mag-matic processes underneath the Cheju volcano were not simple.
The effects of adding goldenrod leaf (GL) and stem powder (GS) (1 and 2%) to sausage meat were evaluated for quality characteristics. The compositional properties, pH, cooking yield, instrumental color, emulsion stability, viscosity, texture, and sensory properties were investigated. Adding GL and GS increased the moisture and ash concentration in sausages. Furthermore, increasing the amount of added GL and GS helped to develop (p<0.05) cooking yield, emulsion stability, and viscosity in the meat batters. Sausages with 2% GL and GS had significantly higher springiness and hardness than those of the control. No significant differences in cohesiveness were observed among the treatments. CIE L*and CIE a*values were highest (p<0.05) in the control sausage. Treatment with 2% GL resulted in the highest CIE b* values (p<0.05) in batter and sausages. No significant difference was observed between the control and other treatments for the overall acceptability. Overall, this study indicated that GL and GS could be used as dietary fiber in sausages to improve quality characteristics.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.