• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.264-266
• /
• 2006

This traveling wave tube amplifier maintenance system was developed for performance of microwave Surveillance radar traveling wave tube amplification parts, and field operation. The Maintenance system is traveling wave tube amplification part RF output waveform measurement and HVPS Voltage adjustment and a maintenance function are offer. The system was developed as an embedded system base it consisted of Linux os which applied a top-down design and visual technique. Therefore change and easy extension of a system. This paper discussed characteristic of maintenance equipment function, composition, and an employment program.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.775-781
• /
• 2022

As part of research to develop a permanent wave-reducing agent for hair, in the current study, 0.1%-1.0% of Polyquaternium-10 was added to a permanent reagent containing Nicotinoyl Dipeptide-23 to prepare the agent, which was tested on damaged hair. The pH change was relatively stable even after a date, but due to the hair's natural composition, 0.1%-0.6% of the Polyquaternium-10 concentration according to pH was suitable. The temperature safety experiment demonstrated it to be stable at a high temperature and at room temperature, but when a Polyquaternium-10 concentration of 0.9% or higher was added at 0℃, coagulation occurred. In terms of the force efficiency of permanent wave formation, wave efficiency lowered as the concentration increased: the longer the wave lasts, the lower the Polyquaternium-10 concentration. The permanent moisture content was found to be higher as the concentration of Polyquaternium-10 increased. Therefore, when Polyquaternium-10 is applied to the permanent wave-reducing agent, considering stability, permanent formation, durability, and moisture rate, the most suitable concentration was found to be that of Polyquaternium-10 in the cysteine-reducing agent. A novel finding from this study is that as the concentration of Polyquaternium-10 increases, the consistency of the permanent wave-reducing agent changes, shifting from a liquid to a viscous liquid formulation.

• Journal of Navigation and Port Research
• /
• v.35 no.7
• /
• pp.569-573
• /
• 2011

In this paper, we developed a Smart Heat Radiating Sheet(SHRS) having the absorption ability of more than 15 dB, and thermal conduction rate more than 20 W/mk for port logistics RFID(Radio Frequency IDentification) system by using AMP(Amorphous Metal Powder) and shielding sheet. Firstly, the EM(Electro_Magnetic) wave absorber samples were fabricated by using AMP and CPE (Chlorinated Polyethylene) with different composition ratios of 80 : 20 wt.% and 85 : 15 wt.%, respectively. Secondly, we fabricated the Smart Heat Radiating Sheet using the shielding sheet to attach EM Wave Absorber. As a result, the Smart Heat Radiating Sheet with absorption ability of 16 dB at 433 MHz and thermal conduction rate is 24 W/mk has been developed with the composition ratio of Amorphous Metal Powder : CPE = 85 : 15 wt.% and thickness of 5.5 mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.144-148
• /
• 1993

This paper is a study on electromagnetic wave absorption properties for the composition ratio of Ni-Zn-Fe$_2$O$_4$. Li-Zn-Fe$_2$O$_4$was composed of Fe$_2$O$_3$ 48∼51mo1%, LiO 18 ∼22mo1%, ZnO 34∼27mo1%. and sintering was carried out at 1200$^{\circ}C$. Through the experiments, the resonance phenomenon occured at low frequence range for high permeability, and vice versa. Specialy, In the case of Fe$_2$O$_3$49mol%, NiO 20mo1%, ZnO 3lmol% ,and the matching thickness was 10mm , the absorbing bandwith was 0.35 ∼0.95GHz. Also, In the case of Fe$_2$O$_3$51mo1%. NiO 22mo1%, ZnO 27mol%, we could get the absorbing bandwith of 0.45∼1.2GHz when the matching thickness was 6mm. Therefore. it is proved that electromagnetic wave absorbers with the above bandwidth range can be fabricated successful1y.

• Advances in concrete construction
• /
• v.13 no.5
• /
• pp.367-376
• /
• 2022

Theoretical study of vibration distinctiveness of rotating cylindrical are examined for three volume fraction laws viz.: polynomial, exponential and trigonometric. These laws control functionally graded material composition in the shell radius direction. Functionally graded materials are controlled from two or more materials. In practice functionally graded material comprised of two constituent materials is used to form a cylindrical shell. For the current shell problem stainless steel and nickel are used for the shell structure. A functionally graded cylindrical shell is sanctioned into two types by interchanging order of constituent materials from inner and outer side for Type I and Type II cylindrical shell arrangement. Fabric composition of a functionally graded material in a shell thickness direction is controlled by volume fraction law. Variation of power law exponent brings change in frequency values. Influence of this physical change is investigated to evade future complications. This procedure is capable to cater any boundary condition by changing the axial wave number. But for simplicity, numerical results have been evaluated for clamped- simply supported rotating cylindrical shells. It has been observed from these results that shell frequency is bifurcated into two parts: one is related to the backward wave and other with forward wave. It is concluded that the value of backward frequency is some bit higher than that forward frequency. Influence of volume fraction laws have been examined on shell frequencies. Backward and forward frequency curves for a volume fraction law are upper than those related to two other volume fraction laws. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.64-71
• /
• 1996

Detonation phenomena of $C_2H_2$were invesgated using the various shock tube. To study the detonation characteristics according to the composition of $C_2H_2-0_2$$_2$ and $C_2H_2$-air mixtures, the composition were varied from 5 to 90% and 5 to 50% of acetylene each other. A spiral ring was installed in the shock tube to study the effect of obstacles in DDT phenomena. Detonation velocities were measured using the photodiode, and the DDT phenomena was visualized using the high speed schlieren photograph. From the experimental result, it was found that the detonation velocity was most high near the 1. 8times the stoichiometric ratio of acetylene. And from the visualization of DDT phenomena, it was found that the detonation wave was strengthened throuth the pile up of small compression wave of burned gas. And the obstacles in shock tube accelerate the detonation reaction by turblent effect of flammable gas mixture.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.17-32
• /
• 1982

Wave propagation in gyrotropic or anisotropic medium is analyzed in terms of the eigenmodes of the medium, which are admixture of TE and TM waves. The field composition and the phase velocity of the modes are also determined. The results of the analysis are applied to thin film optical waveguide using such medium as substrate and/or film. Based on the characteristic equations for phase constants of the waveguide, the condition for TE-TM mode convection is derived, and wave propagation in the guide is represented in the form of Jones matrix, which allows a new interpretation in the conversion efficiency of the thin-film optical waveguides.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.2
• /
• pp.143-148
• /
• 2008

Variations of the seventeen amino acids(aspartic acid, threonine, serine, glutamic acid, proline, glycine, alanine, cystein, valine, methionine, isoleucine, leucine, tyrosine, phenylalanine, histidine, lysine, arginine) were analyzed in human hair sample by amino acid auto analyzer(AAA). The effect of bleaching and permanent wave manipulation on the amino acid composition of hair were investigated. Hair samples were collected from 10 males in their thirties. Hair samples were treated with 10 mL of 6 N hydrochloric acid at $110^{\circ}C$ for 24 h and analysed by AAA. The results showed that the amino acid content of normal hair(73.9%) decreased to 71.5% and 69.3% after bleaching and permanent wave treatment, respectively. Furthermore, mean contents of lysine and tyrosine in amino acids showed obviously decreased about 25% by permanent wave and bleaching treatment. On the other hand, serine, cystein, leucine and histidine were not changed.

• ALGAE
• /
• v.26 no.3
• /
• pp.243-251
• /
• 2011

Environmental conditions can influence the morphology of local biota through phenotypic plasticity or local adaptation. Macroalgal morphologies are often associated with wave-exposure conditions. We investigated the relationship between morphology and wave exposure in two common endemic subtidal macroalgae, Carpophyllum angustifolium and C. maschalocarpum, from the East Cape of New Zealand. Morphological comparisons were made between individuals from two sites and four different wave-exposure zones, as defined by fetch and barnacle composition. Of the seven morphological traits measured in C. angustifolium, only total length varied, and individuals were longer in more wave-exposed environments between the two exposure zones where the species were found. In contrast, total length, stipe thickness and vesicle presence all varied significantly between exposure zones in C. maschalocarpum. C. maschalocarpum specimens were shorter with thinner stipes, and fewer individuals had vesicles in the more wave-exposed zones. Morphological traits of both species also varied between sites, suggesting that other influences are important for determining species morphology. Further study is needed to investigate the role of phenotypic plasticity and genetic variability for driving morphological variation in C. angustifolium and C. maschalocarpum.