• 제목/요약/키워드: Composition ratio

검색결과 3,851건 처리시간 0.038초

Changes in Cell Membrane Fatty Acid Composition of Streptococcus thermophilus in Response to Gradually Increasing Heat Temperature

  • Min, Bonggyu;Kim, Kkotnim;Li, Vladimir;Cho, Seoae;Kim, Heebal
    • Journal of Microbiology and Biotechnology
    • /
    • 제30권5호
    • /
    • pp.739-748
    • /
    • 2020
  • In this study, a method of heat adaptation was implemented in an attempt to increase the upper thermal threshold of two Streptococcus thermophilus found in South Korea and identified the alterations in membrane fatty acid composition to adaptive response to heat. In order to develop heat tolerant lactic acid bacteria, heat treatment was continuously applied to bacteria by increasing temperature from 60℃ until the point that no surviving cell was detected. Our results indicated significant increase in heat tolerance of heat-adapted strains compared to the wild type (WT) strains. In particular, the survival ratio of basically low heat-tolerant strain increased even more. In addition, the strains with improved heat tolerance acquired cross protection, which improved their survival ratio in acid, bile salts and osmotic conditions. A relation between heat tolerance and membrane fatty acid composition was identified. As a result of heat adaptation, the ratio of unsaturated to saturated fatty acids (UFA/SFA) and C18:1 relative concentration were decreased. C6:0 in only heat-adapted strains and C22:0 in only the naturally high heat tolerant strain were detected. These results support the hypothesis, that the consequent increase of SFA ratio is a cellular response to environmental stresses such as high temperatures, and it is able to protect the cells from acid, bile salts and osmotic conditions via cross protection. This study demonstrated that the increase in heat tolerance can be utilized as a mean to improve bacterial tolerance against various environmental stresses.

일부 월경통 환자의 체성분 분석 결과와의 상관성에 관한 연구 (A Study on the Relation of Dysmenorrhea of some patients and Body Composition Analysis)

  • 이진무;이창훈;조정훈;장준복;이경섭;정재혁
    • 대한한방부인과학회지
    • /
    • 제20권3호
    • /
    • pp.155-163
    • /
    • 2007
  • Purpose: Dysmenorrhea is a women's common disease. The aim of this study is to investigate the relation between body composition and VAS, VRS, MVRS of dysmenorrhea. Methods: The subject were 17 women who took body composition(body mass index, percent body fat, waist-hip ratio) analysis(Inbody 720) and answered the questionnaire have been calculated VAS, VRS and MVRS in Kangnam Korean Hospital, Kyunghee Univ. from Apr. 6, 2007 to Mar. 25, 2007. Results: There was statistically significant correlation between BMI and dysmenorrhea VRS, MVRS. There was statistically significant correlation between BMI and dysmenorrhea VRS, MVRS. There was statistically significant correlation between percent body fat and dysmenorrhea VRS, MVRS. There was statistically significant difference of dysmenorrhea VRS, MVRS between BMI underweight group and BMI normal or overweight group. There was statistically significant difference of dysmenorrhea VAS between waist-hip ratio normal group and waist-hip ratio abnormal group. Conclusion: Body composition analysis(body mass index, percent body fat, waist-hip ratio) is useful to predict pain grade of dysmenorrhea.

  • PDF

동시 열증발법으로 제조한 SmBCO 고온 초전도에서 박막 조성비가 표면형상 및 초전도 특성에 미치는 영향 (The effect of composition ratio on the surface morphology and superconducting properties of SmBCO films prepared by thermal co-evaporation method)

  • 이남진;김호섭;하홍수;고락길;송규정;하동우;양주생;김태형;정예현;염도준;문승현;박찬;오상수
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제9권1호
    • /
    • pp.5-8
    • /
    • 2007
  • We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.

유기오염물 차단을 위한 반응재료의 강도 특성 평가 (Evaluation on Strength Characteristics of Reactive Materials to Prevent the Diffusion of Organic Pollutants)

  • 이재영;오승진;김수희;이기철;박정준;홍기권
    • 한국지반신소재학회논문집
    • /
    • 제22권4호
    • /
    • pp.35-42
    • /
    • 2023
  • 본 연구에서는 유기오염물의 흡수가 가능한 차수재의 반응재료에 대하여 지중 매입 재료로서의 적용성을 평가하기 위해 오염물의 접촉에 의한 강도 특성 변화를 평가하였으며, 강도 평가는 일축압축시험 결과를 이용하였다. 시험 결과, 오염물 종류에 따른 반응재료의 강도는 물 > TCE > TPH의 순서로 확인되었다. 그러나 폴리노보넨의 구성비가 12% 이하에서는 TPH의 강도가 TCE에 비하여 크게 나타났다. 물로 접촉된 반응재료는 폴리노보넨의 구성비가 작을수록 강도가 지속적으로 감소하였지만, TCE 및 TPH와 접촉된 반응재료의 강도는 폴리노보넨의 구성비가 30%에서 21%까지 작아질수록 증가하다가 이후에는 감소하였다. 즉, 지중에서 발생되는 응력 조건에 따라 오염물의 접촉에 의한 강도를 고려하여 반응재료의 최적 구성비가 적용되어야 한다.

물리치료가 뇌졸중 환자의 체성분 변화에 미치는 영향 (The Effects of Physical Therapy on Body Composition in Stroke Patients)

  • 신홍철;강정일;김응각
    • 대한물리치료과학회지
    • /
    • 제9권4호
    • /
    • pp.95-104
    • /
    • 2002
  • This study investigated effect to injure cerebrovascular accident patients who divided cerebral hemorrhage and cerebral infarction of sex the distinct on as a result of body composition. cerebral infarction patients of cerebrovascular accidents were observed the higher ratio than cerebrovascular hemorrhage patients. Experimental group were sixteen subjects who had received. we used assessment instruments such as in body to assess body composition. The result were as follows; 1. Change in body composition according to the come of onset, there were not differenced significantly between two groups. 2. Change in body composition according to the sex, the soft lean mass were differenced significantly(p<.05). but the other variations were not differenced significantly between two groups. 3. Change in body composition according to the region of paralysis, the soft lean mass were differenced significantly(p<.05). but the other variations were not differenced significantly between two groups.

  • PDF

한부모의 성별 및 가구구성별 경제적 여건의 차이 (Differences in Economic Conditions of Single-Parent Families : Focused on the Differences between Single-Mother and Single-Father Families and their Household Composition)

  • 배다영;진미정
    • 가정과삶의질연구
    • /
    • 제29권5호
    • /
    • pp.121-140
    • /
    • 2011
  • The purpose of this study is to understand how the economic conditions and needs of single-parent families are different between single-mother and single-father families, and also how they are dependent on household composition. The data for this study were drawn from the 1st Korea Welfare Panel Study and analyzed by frequencies, means, ${\chi}^2$, t-test, F-test, and logistic regression with the STATA 9.1 program. The major findings are as follows: (1) Single-parent families are more likely to live in a three-generation household than married couple families. (2) The composition of a three-generation household of single-parent families is affected by sex, age, education, type of marital disruption, the type of employment of single parents and the age of the last-born child. (3) The income-to-needs ratio is not significantly different depending on the sex of the single parents and their household composition. However, material hardship is significantly low in three-generation household single-parent families. (4) There are differences between three-generation single-parent families and independent single-parent families in income sources: The ratio of public transfer to total incomes is higher in three-generation households than independent households, while the ratio of private transfer to total incomes is higher in independent households.

Nanoemulsions containing Vitamin E acetate prepared by PIC(phase inversion composition) methods: Factors affecting droplet sizes

  • Kim, Eun-Hee;Cho, Wan-Goo
    • 한국응용과학기술학회지
    • /
    • 제30권4호
    • /
    • pp.602-611
    • /
    • 2013
  • We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.

액체연료 생산을 위한 폐글리세린의 가스화 기술 개발 (Gasification of Crude Glycerin for Liquid Fuel Production)

  • 윤상준;라호원;이시훈;최영찬;이재구
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.451-454
    • /
    • 2009
  • Production and application of biodiesel are expected to grow steadily in the coming years and thus output of its by-product, crude glycerin, will accordingly increase as well. In the present study, gasification of biodiesel by-product as a renewable energy was performed in an entrained flow gasifier to investigate the gasification performance with the operating conditions. Crude glycerin shows a high heating value of 6,000 kcal/kg and low ash and sulphur content. Gasification was conducted in a temperature range of $950\;{\sim}\;1500\;^{\circ}C$. The variation of syngas composition with excess air ratio of 0.17 ~ 0.7 for air or oxygen as a gasification agent was investigated. From the results, syngas heating value, carbon conversion and cold gas efficiency of more than $2500\;kcal/Nm^3$, 95% and 65% were achieved, respectively. The temperature dependency of syngas composition, carbon conversion, and cold gas efficiency shows a similar tendency to excess air ratio at the temperature corresponding to the excess air ratio. The $H_2/CO$ ratio of the product gas was varied from 1.25 to 0.7 with the excess air ratio and this gas composition was favorable for DME synthesis. The optimum excess air ratio for gasification of biodiesel by-product was evaluated to be an approximately 0.35 to 0.4. The present results indicate that crude glycerin can be utilized as a feedstock for gasification to make syngas.

  • PDF

대용우유 제조에 관한 연구 (제2보). 대용우유의 조성과 영양가 (Development of Imitation Milk (II). Feed Efficiency Ratio and Over-All Nutritive Value)

  • 유영진;김택영;이정근;김승환;김택제
    • 대한화학회지
    • /
    • 제21권2호
    • /
    • pp.125-131
    • /
    • 1977
  • Imitation milk는 식물성유(soy milk)에 식물성유(油), 탄수화물, whey powder, Nacascinate, 필수아미노산, 비타민, 무기물 등을 배합 가공한 것이다. Spray dried 방법으로 제조한 imitation milk의 feed efficiency ratio 및 영양가 측정은 Albino Rat의 사육시험과 화학적분석 방법으로 측정하였다. 지방산과 아미노산의 각 성분조성은 Gaschromatography 및 Amino Acid Autoanalyzer로 분석하였다. 이 연구 결과를 고찰하여 보면 필수아미노산과 고도불포화지방산이 feed efficiency ratio에 큰 영향을 미친것을 확인할 수 있다.

  • PDF

입계상 조성이 탄화규소의 미세구조와 기계적 특성에 미치는 영향 (Effect of Grain Boundary Composition on Microstructure and Mechanical Properties of Silicon Carbide)

  • 김재연;김영욱;이준근
    • 한국세라믹학회지
    • /
    • 제35권9호
    • /
    • pp.911-916
    • /
    • 1998
  • By using {{{{ { { {Y }_{3 }Al }_{5 }O }_{12 } }} (YAG) and SiO2 as sintering additives the effect of the composition of sintering ad-ditives on microstructure and mechanical properties of the hog-pressed and subsequently annealed SiC ma-terials were investigated. Microstructures of sintered and annealed materials were strongly dependent onthe composition of sintering additives. The average diameter and volume fraction of elongated grains in an-nealed materials increased with the SiO2/YAg ratio while the fracture toughness increased with the SiO2/YAg ratio. The average MPa.{{{{ { m}^{1/2 } }} respectively. Typical strength and fracture toughness of an annealed material with SiO2/YAg ra-tionof 0.67 were 371 MPa and 5.6 MPa.{{{{ { m}^{1/2 } }} respectively.

  • PDF