• 보존과학연구
• /
• s.22
• /
• pp.93-114
• /
• 2001

The composition analysis of Danchung pigments at Geunjeongjeon Hall in Gyeongbokgung Palace were carried out by FXRF and MXRD. The analytical result of the inside pigments at Geunjeongjeon showed that these painted in use the mineral pigments. Gold pigment was pure gold(Au).The main composition identified in green pigments were chalcanthite($CuSO_4$.$5H_2O$) and celadonite($K(Mg, Fe, Al)_2$.$(Si, Al)_4O_10(OH)_2$ ). Red pigments werecinnnabar(HgS).The analytical result of the outside pigments at Geunjeongjeon revealed that these applied to the artificial synthetic pigment. Yellow pigment was chromeyellow($PbCrO_4$). The main composition identified in red pigments were red lead($Pb_3O_4$)and hematite($Fe_2O_3$). Green pigments were emeral green($C_2H_3A_s3Cu_2O_8$) and chromegreen($Cr_2O_3$). Blue pigment was lazurite($Na_6Ca2Al_6Si_6O_24(SO_4)_2$), titanium dioxide($TiO_2$) of white pigment.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.150-159
• /
• 2016

Knowledge of the distribution and biodiversity of environmental bacteria and the ecosystem that influences them is crucial for predicting an ecosystem. However, bacterial culture methods can only analyze approximately 0.1% of the existing microorganisms, those that are readily cultured under laboratory conditions. By contrast, next-generation sequencing (NGS) has generally been known to obtain more diverse profiling of bacterial composition. We compared the bacterial communities using both a culture-dependent (MALDI-TOF) and culture-independent (NGS) methods. Environmental specimens were obtained from both freshwater and seawater. Water samples were also analyzed by both pyrosequencing and MiSeq sequencing, in order to select one NGS platform which could analyze comparatively more diverse microbiota. Bacterial distribution analyzed with MALDI-TOF showed no difference between the microbiota of freshwater and seawater, whereas the results analyzed with NGS distinguished between the two. The diversity indexes of MiSeq sequencing were higher than for Pyrosequencing. This indicated that MiSeq sequencing is capable of analyzing a comparatively wider diversity of bacteria. The genus of Flavobacterium and Planktophila were identified as being unique to freshwater, whereas EU801223 and OM43 were found in the seawater. Difference between the bacterial composition of the freshwater and seawater environments was identified by MiSeq sequencing analysis.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.88-96
• /
• 2018

The income level of people in South Korea has risen as the gross national income per capita reached the milestone of 30,000 dollars. More and more consumers try to change their houses according to their tastes just like they express themselves through clothes, bags, and other fashion items, thus pursuing value-based consumption. The changes to the housing culture including the greater percentage of one- or two-person households and the growing trend of lease and monthly rent have made consumers increase their demands for products to express their lifestyles. As a result, global lifestyle shops with characteristic and diverse concepts entered the South Korean market and were joined by South Korean fashion brands, large-sized stores, department stores, and fancy stationery manufacturers, which launched their own brands, in the expansion of lifestyle shops across the nation. Lifestyle shops have a couple of unique attributes including the relatively clear selection of target consumers and a clear set of VMD strategies accordingly. Based on a judgment that there was cost differentiation among brands, the investigator categorized the comparison and analysis criteria into high, middle, and low prices to apply case analysis. This study set out to analyze VMD strategies for spatial composition through cost differentiation among lifestyle shops, take the results into total consideration, and propose an effective and competitive VMD strategy for lifestyle shops through spatial composition elements.

• Korean Journal of Community Nutrition
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2004

This study was done to investigate effects of smoking, drinking and exercise on body composition, dietary intakes, serum lipids of male high school students in Seoul. Body Composition was analyzed by the Bioelectrical Impedance Fatness Analyzer. Dietary survey was conducted by 24-hour recall method and nutrient intakes were analyzed by the Computer Aided Nutritional analysis program for professional (CAN-Pro). All data were statistically analyzed by SAS PC package program. Mean and standard error were examined for each items. The significant difference was examined by student's t-test. Body composition data showed that protein mass, mineral mass and lean body mass of regular exercisers were significantly higher (p < 0.05) than those of irregular exercisers. Energy and protein intakes of male high school students were 1868 kcal/day (69.2% RDA), 68 g/day (91.3% RDA), respectively. Ca, Fe and Vitamin B$_2$ intakes were lower than 2000 RDA. Analysis of serum lipids showed that serum levels of HDL-cholesterol of drinkers were significantly higher (p < 0.05) than those of nondrinkers. Overall results imply that smoking and alcohol drinking of adolescent males may not much influence on serum lipids levels because pack-years of smoking or the amount of alcohol drinking was not serious enough to be harmful to health.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.361-368
• /
• 2012

Purpose: The aim of this study was to analysis the composition on the centrifugal casting and the oxide on the casting temperature. Methods: The nickel based alloy were used in this study. Wax pattern specimens (10*10*2) were invested with phosphate-bonded investment in metal rings, the liquid/powder ratio and overall burn-out schedules for these investments were followed in accordance with the manufacturer's instructions. After casting, the alloy specimens were evaluated as regards composition(EPMA). The casting temperatures were as follows: $1400^{\circ}C$ and $1700^{\circ}C$. The quantitative analysis of oxides were scanning electron microscope(SEM), energy dispersive spectroscopy(EDS) and line scanning. Results: Nearer the injection lines showed that there is a large amount of nickel. Quantitative of oxides of Ni-Cr alloy cast from $1400^{\circ}C$ is lager than Ni-Cr alloy cast from $1700^{\circ}C$. Conclusion: Casting when using a centrifugal casting machine centrifugal force affects the composition of the alloy. The higher the temperature, the amount of oxide that is generated many.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2793-2799
• /
• 2013

This paper proposes an effective feature compensation method to improve speech recognition performance in time-varying background noise condition. The proposed method employs principal component analysis to improve the variational model composition method. The proposed method is employed to generate multiple environmental models for the PCGMM-based feature compensation scheme. Experimental results prove that the proposed scheme is more effective at improving speech recognition accuracy in various SNR conditions of background music, compared to the conventional front-end methods. It shows 12.14% of average relative improvement in WER compared to the previous variational model composition method.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1120-1130
• /
• 2018

An analysis of a pyroprocessing safeguards methodology employing the Pu-to-$^{244}Cm$ ratio is presented. The analysis includes characterization of representative used nuclear fuel assemblies with respect to computed nuclide composition. The nuclide composition data computationally generated is appropriately reformatted to correspond with the material conditions after each step in the head-end stage of pyroprocessing. Uncertainty in the Pu-to-$^{244}Cm$ ratio is evaluated using the Geary-Hinkley transformation method. This is because the Pu-to-$^{244}Cm$ ratio is a Cauchy distribution since it is the ratio of two normally distributed random variables. The calculated uncertainty of the Pu-to-$^{244}Cm$ ratio is propagated through the mass flow stream in the pyroprocessing steps. Finally, the probability of Type-I error for the plutonium Material Unaccounted For (MUF) is evaluated by the hypothesis testing method as a function of the sizes of powder particles and granules, which are dominant parameters to determine the sample size. The results show the probability of Type-I error is occasionally greater than 5%. However, increasing granule sample sizes could surmount the weakness of material accounting because of the non-uniformity of nuclide composition.

• The Research Journal of the Costume Culture
• /
• v.29 no.3
• /
• pp.388-405
• /
• 2021

This study classifies the compositional methods of power shoulder jackets from 1980 to the present. It analyzes the relevance of jacket details according to how the power shoulder changes and its compositional methods by era. The research subdivides shoulder compositional techniques into seven, based on shoulder variation, sleeve variation, and the body and sleeve combination. The researcher investigates the frequency and trends of composing shoulders and analyzes details pertaining to the silhouette, jacket length, collar shape, and front closure. The most common method of shoulder composition is an angular shoulder variation. The others are a rounded shoulder variation, puffed sleeve, sleeve variation using pattern incision, raglan and kimono sleeves, and a shoulder variation that expanded the angle and width. The frequency differs slightly for each era. The relationship between shoulder compositional methods and details of power shoulder jackets is statistically significant, showing period-related differences. The homogeneity analysis results reveal that the shoulder composition of power shoulder jackets, the times, and details fall into distinct groups. This analysis shows that the silhouette, length, collar, and front closure of the power shoulder jacket differ depending on the power shoulder's compositional methods. Moreover, the shape of the power shoulder jacket is distinctly different. One can use this data to help develop the power shoulder jacket design by reflecting the details of shoulder compositional methods and changing trends over time.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.1
• /
• pp.35-44
• /
• 2021

Purpose: To presenting basic data for the spatial composition required when planning the future department of rehabilitation medicine by analyzing the spatial composition of the location, size, area, and plan type of the rehabilitation department of the Regional Public Hospital. Methods: 3 Methods have been used in this paper. 1) Analyzing drawings to derive the net floor area of each room. 2) A literature survey about rehabilitation healthcare system. 3) Observation survey for user circulation analysis. Results: 1) Rehabilitation is an overall process of treatment that helps to play a role as an individual in society, away from the perspective of treating physical damage. The Department of Rehabilitation Medicine of the local medical center must provide rehabilitation medical services corresponding to the recovery and maintenance period for community rehabilitation. 2) The Department of Rehabilitation Medicine can be classified into diagnostics area, examination area, treatment area, management area, and interface area based on the rehabilitation treatment process. Implication: It can be used as basic data when planning related facilities by analyzing the characteristics of the space plan of the required room according to the relationship between activities, movement lines, and operation plans based on user behavior.

• Biomedical Science Letters
• /
• v.16 no.3
• /
• pp.169-177
• /
• 2010

Osteoporosis is a disease that increases the fracture rates and a major cause of increased mortality and morbidity in the elderly people. This study is to determine which components of body composition and metabolic syndrome risk factors are important to bone health, we analysed the relationship among bone mineral density (BMD), body composition and metabolic syndrome risk factors in females. Totally 630 females participated in a medical check-up program (mean age 47 years) were selected for this study. Body composition analysis was performed by segmental bioelectrical impedance method, muscle mass, and percent body fat were measured. We also measured metabolic syndrome risk factors including abdominal obesity, HDL-cholesterol, triglyceride, blood pressure and fasting glucose level. Metabolic syndrome was defined by NCEP-ATP III criteria. The lumbar spine and femoral neck BMD were measured using the dual energy X-ray absorptiometry. Osteopenia and osteoporosis were observed in 180 and 51 persons, respectively. Muscle mass and HDL-cholesterol decreased in osteopenia and osteoporosis groups compared to the control group, and the grade was shown progressively by the symptoms. Significant positive correlation between BMD and muscle mass was observed. Multi variable regression analyses showed that % body fat and muscle mass were independent predictors of BMD after adjustment of age, height and weight. In conclusion, the BMD showed negative correlation with the metabolic and body composition was associated with BMD.