• 한국정밀공학회지
• /
• 제30권7호
• /
• pp.769-776
• /
• 2013

The dynamic compliance characteristics of a prosthetic foot midgait are very important for natural performance in an amputee's gait and should be in a range that provides natural, stable walking. In this study, finite element analysis (FEA) and classical laminate theory were used to examine the mechanical characteristics of a carbon-epoxy composite laminate prosthetic foot as a function of variation in the lamination composition. From this analysis, an FEM model of a prosthetic keel, made from the composite material, was developed. The lamination composition of the keel was designed for improved stiffness. The prototype product was fabricated using an autoclave. Vertical loading response tests were performed to verify the simulation model. The results of the experiments were similar to those from simulations below the loading level of the gait, suggesting use of the proposed simulation model for prosthetic keel design.

• 자원환경지질
• /
• 제29권3호
• /
• pp.293-304
• /
• 1996

The Wolchul Mt. area is composed of a biotite granite and a pink feldspar granite. These granites are distinctly different in terms of their field occurrence, mineralogy, trace element and REE composition, as well as their isotope ages. The biotite granite has higher ferromagnesian elements and lower lithophile trace element abundances than the pink feldspar granite. The biotite granite has high Sr and Ba while the pink feldspar granite has high Rb. On the Rb-Sr-Ba diagram the biotite granite plots as a granodiorite while the pink feldspar granite belongs to a strongly differentiated granite. The ${\Sigma}$ LREE/ ${\Sigma}$ REE for the biotite granite is 0.95 and for the pink feldspar granite it is 0.88. The ratio shows a steep decrese in LREE while HREE is essentially constant. Based on the Eu/Sm, $[La/Lu]_{cN}$ and low Eu(-), the biotite granite has quartz diorite to granodiorite composition while the pink feldspar granite, with a relatively high Eu(-) anomaly, falls into the monzo- to syenogranite classification. The silica vs. trace element diagrams for the two granites indicate that the biotite granite could have formed near to a continental margin or volcanic island setting environment while the pink feldspar granite formed within a continental plate or as result of plate collision. The biotite granite has a U-Pb zircon age of 175 Ma, i.e. Middle Jurassic. The pink feldspar granite is younger, it has a K-Ar orthoclase age $93.6{\pm}1.5$ Ma which is Late Cretaceous age.

• 한국안전학회지
• /
• 제35권5호
• /
• pp.1-8
• /
• 2020

Mobile elevating work platforms (MEWPs) consist of a work platform, extending structure, and chassis, and are used to move persons to working positions. MEWPs are useful but are composed of pieces of equipment, and accidents do occur owing to equipment defects. Among these defects, accidents caused by the fracture of bolts fixed to the extension structure and swing system are increasing. This paper presents a failure analysis of the fixing bolts of MEWP. Standard procedure for failure analysis was employed in this investigation. Visual inspection, chemical analysis, tensile strength measurement, microstructural characterization, fractography analysis by Optical Microscope(OM) and Scanning Electron Microscopy(SEM), and finite element analysis (FEA) were used to analyze the failure of the fixing bolts. Using this failure analysis approach, we found the root cause of failure and proposed a means for solving this type of failure in the future. First, the chemical composition of the fixing bolt is obtained by a spectroscopy chemical analysis method, which determined that the chemical composition matched the required standard. The tensile test showed that the tensile and yield strengths were within the required capacity. The stress analysis was carried out at five different boom angles, and it was determined that the fixing bolt of MEWP can withstand the loads at all the boom angles. The outcomes of the fatigue analysis revealed that the fixing bolt fails before reaching the design requirements. The results of the fatigue analysis showed primarily that the failure of the fixing bolt was due to fatigue. A visual inspection of the fractured section of the fixing bolt also confirmed the fatigue failure. We propose a method to prevent failure of the fixing bolt of the MEWP from four different standpoints: the manufacturer, safety certification authority, safety inspection agency, and owner.

• 한국융합학회논문지
• /
• 제12권11호
• /
• pp.329-334
• /
• 2021

본 논문은 현대 장신구의 표현에 확대를 가져온 구성주의 특징을 살펴보고 구성주의가 장신구에 어떤 양상으로 활용되었는지 정리하였다. 구성주의의 새로운 재료에 대한 시도와 다양한 표현양식을 살펴보고 복합적인 조형의 표현 요소로 발전된 구성주의의 개념을 이해하는데 목적이 있다. 이를 위해 바우하우스에서 확장되기 시작한 구성주의의 특징을 재료와 공간 구성을 통한 표현의 양상으로 정리하였으며, 장신구 작가들의 다양한 재료의 표현 방법과 시도에 대해 분석하였다. 결과적으로 구성주의는 장신구의 조형성에 건축적 패턴의 구성, 공간의 시각화, 타 재료의 사용의 통한 입체적 표현과 심층적 개념의 조형 양상으로 확장을 보여주었으며 현대 장신구 디자인의 기초적 조형요소의 표본이 되고 있다. 하지만 구성주의의 재료적 조형요소에만 국한되어 디자인의 확장이 필요하다. 따라서 구성주의의 이념이 표현된 다양한 장신구 디자인의 확장에 대한 연구가 요구된다.

• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.473-484
• /
• 2021

Similar to other structures, ultimate strength values showing the maximum load that the structure can resist without damaging has great importance on ships. Therefore, increasing the ultimate strength values will be an important benefit for the structure. Low carbon steels used in ships due to their low cost and good weldability. Improving the ultimate strength values without interfering with the chemical composition to prevent of the weldability properties of these steels would be very beneficial for ships. Grain refinement via severe plastic deformation (SPD) is an essential strengthening mechanism without changing the chemical composition of metallic materials. Among SPD methods, equal channel angular pressing (ECAP) is one of the most commonly used one due to its capacity for achieving bulk ultrafine-grained (UFG) materials. When the literature is examined, it is seen that there is no study about ultimate strength calculation in ships after ECAP. Therefore, the mean purpose of this study is to apply ECAP to a shipbuilding low carbon steel to be able to achieve mechanical properties and investigate the alteration of ship hull girder grillage system's ultimate strength via finite element analysis approach. A fine-grained (FG) microstructure with a mean grain size of 6 ㎛ (initial grain size was 25 ㎛) was after ECAP. This microstructural evolution brought about a considerable increase in strength values. Both yield and tensile strength values increased from 280 MPa and 425 MPa to about 420 MPa and 785 MPa, respectively. This improvement in the strength values reflected a finite element method to determine the ultimate strength of ship hull girder grillage system. As a result of calculations, it was reached significantly higher ultimate strength values (237,876 MPa) compared the non-processed situation (192,986 MPa) on ship hull girder grillage system.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.301-310
• /
• 2003

저치환율 샌드콤팩션파일공법(SCP공법)을 합리적으로 설계하기 위해서는 압밀중에 발생하는 복합지반 내부의 모래말뚝과 점토 양자의 상호역학거동을 정확히 파악하고 그 메커니즘을 이해하여야 할 필요성이 있다. 본 논문에서는 저치환율 SCP공법에 의해 개량된 복합지반의 압밀중에 발생하는 역학적 상호작용을 규명하기 위하여 일련의 수치해석을 실시하였다. 수치해석은 탄점소성 압밀 유한요소법을 적용하였으며, 그에 대한 신뢰성은 SCP에 의해 개량된 복합지반의 압밀거동에 대한 일련의 모형실험 결과와의 비교를 통해 검증할 수 있었다. 또한, 수치해석의 결과들로부터 저치환율의 모래말뚝이 타설된 복합지반의 모래말뚝과 점토에 대해 압밀중에 발생되는 각각의 역학거동과 복합지반 내부에 대한 응력분담 메커니즘에 대하여 규명하였다.

• 대한건축학회논문집:계획계
• /
• 제35권9호
• /
• pp.109-117
• /
• 2019

Since 'Hanok Expanse Support' has been started in Seoul, its target was expanded from renovation to new construction and from 'Hanok District' to all area in Seoul. The newly built hanok with Hanok Expanse Support had to follow the standards about the form of the hanok and adapt to modern lifestyle. However, the newly built hanok were planned with 'kan' since it retained the traditional wooden structure. So their composition of kan were considered to be influenced by the standards of each district and modern lifestyle. Therefore the aim of this study is to understand the architectural characteristics of newly built hanok in Seoul since 2000 focusing on the kan composition. Because of the differences in site conditions and the district unit plan, newly built hanok in Hanok District have more limited changes than Other District. However, kan is composed variously in horizontal and vertical ways to make the most space according to site conditions and most of the newly built hanok have opened courtyard rather than closed courtyard layout. With kan composition in various directions and kan added under the eaves, kan is highlighted in form. On the other hand, the composition of kan as an interior spatial element has changed and weakened because the lifestyle has changed compared to the traditional hanok and the 20th century urban hanok. Also the regular kan composition of Mom-chae and Nalgae-chae has changed. And kan is divided regardless to the wooden structure. Also, with the added kan under the eaves the main kan is dismantled inside. This paper indicates that although there is an undeniable premise that the case is restricted to hanok received Hanok Expanse Support on the condition of following the standards of the form of hanok, it is a part of the transitional changes that hanok is experiencing.

• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.38-45
• /
• 2004

본 논문에서는 병렬 랜더링 기법의 특정들을 고창하고 이를 토대로 대규모 유한요소 해석결과를 효율적으로 가시화 할 수 있는 병렬 가시화 알고리듬을 제안하였다. 제안된 알고리듬은 요소영역별 계산을 기반으로 하는 병렬 유한요소 해석의 특성에 적합하도록 부분 후 분류방식을 기반으로 설계되었으며, 이미지 조합 과정에 수반되는 네트워크 통신을 효율화하고자 이진 트리구조 통신 패턴을 적용하여 구성되었다. 자체 개발된 소프트웨어를 이용하여 벤치마킹 테스트를 수행하고, 이를 통해 제안된 알고리듬의 병렬 가시화 성능을 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.64-67
• /
• 2000

Element distribution analysis and degradation characteristics of the ZnO varistors fabricated at the ambient sintering-process is investigated in this study. ZnO varistors made of Matsuoka's composition were fabricated by standard ceramic techniques. The ambient sintering-process is performed at the special electrical-furnace which is equipped with the vacuum system. The Gases of injection at sintering- process were oxygen, air, nitrogen and argon respectively. Element and quantitative analysis in the microstructure of ZnO varistors made use of EPMA equipment. Degradation characteristics were showed by DC degradation tests at $115{\pm}2\;^{\circ}C$ for period up to 13 h. From above analysis, it is found that at the DC degradation test the ZnO varistor sintered in oxygen atmosphere showed the excellent prop properties among them and these results could be explain by element and quantitative analysis in ZnO microstructure.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.197-201
• /
• 2009

A lot of work is carried out concerning to acicular ferrite formation in the weld metal of high strength and low-alloy steel. Those results are suggesting that oxides that contain titanium elements provides nucleation site of intragranular ferrite, referred as acicular ferrite. Thus, when intragranular ferrite is expected to form in heat-affected zone, oxide containing titanium element should be formed in the steel. However, normal steel is deoxidized by using aluminum element (Al-killed steel) with little oxygen content. It means almost oxygen is deoxidized with aluminum elements. In the present work, in order to form the acicular ferrite in the heat affected zone, with the same concept in the case of weld metal, the steel deoxidized with titanium element (titanium killed-steel) is prepared and the acicular ferrite formation is observed in detail by using laser-conforcal microscopy technique. The confocal technique makes it possible that the morphological change along the phase transformation from austenite to ferrite is in-situ tracked. Thus, the inclusion that stimulated the ferrite nucleation could be directly selected from the observed images, in the HAZ of the Ti-killed steel. The chemical composition of the selected inclusion is analyzed and the nucleation potential is discussed by changing the nucleation site with boron element. The potency for the ferrite nucleation is summarized and the existence of effective and ineffective manganese sulfide for nucleation is made clear.