• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.4
• /
• pp.373-381
• /
• 2017

A Collaborative Optimization (CO) methodology for ring-stiffened composite material pressure hull of underwater vehicle is proposed. Structural stability and material strength are both examined. Lamination parameters of laminated plates are introduced to improve the optimization efficiency. Approximation models are established based on the Ellipsoidal Basis Function (EBF) neural network to replace the finite element analysis in layout optimizers. On the basis of a two-level optimization, the simultaneous structure material collaborative optimization for the pressure vessel is implemented. The optimal configuration of metal liner and frames and composite material is obtained with the comprehensive consideration of structure and material performances. The weight of the composite pressure hull decreases by 30.3% after optimization and the validation is carried out. Collaborative optimization based on the lamination parameters can optimize the composite pressure hull effectively, as well as provide a solution for low efficiency and non-convergence of direct optimization with design variables.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.145-151
• /
• 2019

The coastal composite fishery has the highest rate of around 30.0% in registered fishing vessels of Korea for the last three years. The risk analysis for the fisher's safety of coastal composite fishing vessels was conducted to serve as a basic data for improving the healthy and safe working environment of fisher using fisher's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2016 to 2018 (n = 1,105). As a result, the occupational accident occurrence rate of coastal composite fishery was 3.76% in all industries, 7.8 times the rate of that. In addition, death and missing rate was found to have a serious level management to 10.10‱. Among the accidents, 76.0% occurred at sea. The slipping, others and contact with machinery or fishing gear occurred more frequently in order in the frequency of accident occurrence pattern. In the risk assessment using frequency and severity, slipping, contact with machinery and others showed high risk during fishing. The results are expected to contribute to identification and assessment of safety hazard occurred in coastal composite fishing vessels.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.127-132
• /
• 2023

In this study, designing of a Type 4 pressure vessel using the filament winding method was conducted. In order to prevent leakage in consideration of the design of the hydrogen storage tank, a liner was designed by applying high-density polyethylene (HDPE), and the composite structure was designed by stacking carbon/epoxy in the hoop and helical directions. As a theoretical approach, the angle of the helical fiber and fiber thickness of each hoop and helix were designed. The safety of the design was verified using the commercial software ANSYS.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.439-444
• /
• 2003

Acoustic emission(AE) ran be very effectively applied to locate the damaged area in large structures by detecting the elastic waves generated during the damage process within solids. Source location in the composite structures has been, however, extremely difficult due to the acoustic anisotropy with the velocity dependence on fiber orientations. In this study, it has been shown that a newly proposed method for 2-D source location of anisotropic structures is practically applicable to the real structure. The method employes wave velocities obtained with different velocities from $0^{\circ}\;to\;90^{\circ}$ for a filament wound composite pressure vessel under the air-filled and the water-filled conditions.

• Composites Research
• /
• v.20 no.2
• /
• pp.1-9
• /
• 2007

To evaluate and investigate the aging characteristics and the structural service lifetime of the CFV(carbon fiber pressure vessel), natural aging tests were carried out using the CFVs, which had been placed and aged at outdoor and indoor laboratories for 10 and 15 years, respectively. To obtain the probabilistic characteristics of ageing characteristics in aged CFVs, inner pressure loading test was conducted with ring specimens taken from aged CFVs. And, to observe the interface morphology of aged CFVs, the micro-photographs were taken by SEM microscope and the fractured interfaces between the carbon fiber and the matrix resin were scrutinized. Based on the Weibull parameters of the tensile failure strain of aged CFVs, the degradation of the 10 and the 15 year aged CFV occur by 19% and 23%, respectively, and the effect of the placement, whether being placed inside the laboratory or not, is not so significant. However, the outer layer protection, such as painting, is found very advantageous to prevent CFV from aging.

• International Journal of Ocean System Engineering
• /
• v.3 no.3
• /
• pp.136-141
• /
• 2013

The present research was aimed at comparing performance of metallic and polymer composite shells of a typical underwater vessel of length and inner diameter of 1650 mm and 350 mm respectively, based on the critical buckling pressure for operating depth of 1000 m using ANSYS. High strength steel, aluminium alloy, titanium alloy, glass / epoxy and carbon / epoxy materials were examined. The results indicated weight savings of 46 % in carbon/epoxy and 31 % in glass / epoxy when compared with high strength steel, based on the thickness of the shell for sustaining 10 MPa buckling pressure.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.92-97
• /
• 2000

Low-velocity impact damage of a thick pressure vessel by composite materials was studied using the modified Herzian contact radius theory. Impactors of various masses and various tup shapes were dropped freely in the range of 20m to 200mm height. With acceleration gage and strain gage installed on the impactor, impact force and acceleration and Contact radius were measured. After a test, the samples were radiographed to scan the state of damage. Compared with hemispherical tup of 12.7mm diameter, the contact radius of hemispherical tup of 25.4mm diameter was bigger. And the experimental data and the theoretical data was different due to the mechanical properties difference. The acceleration value was changed linearly according to the height.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.208-216
• /
• 2004

Since 2000, the authors have been developing remote radar network system to observe the vessel traffic in Tokyo Bay. In December 2002, the first operational remote radar station was set at the National Defense Academy in Yokosuka, and vessel traffic observation was started. However, it was impossible to perform accurate observation in the northern part of Tokyo Bay by this Yokosuka radar station only. In September 2003, the second remote radar station and AIS receiving station were installed at Higashi Ogishima in Kawasaki. This second radar enabled us to carry out accurate observation in that area. Both radars can be remotely controlled from the monitoring station in Tokyo University of Marine Science and Technology. On September 30 and October 1,2003, the vessel traffic observation was carried out using both radars. Combining radar images observed by both radars, the ships' tracks were taken and the dangerous ships were extracted by using SJ value and Bumper Model. The time changes of dangerous ship density in some areas in Tokyo Bay and utilization ratio of the traffic routes were also investigated. In addition, analyzing the AIS date received at Kawasaki station, the positions and speed vectors of the ships equipped with AIS were shown.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.2
• /
• pp.140-147
• /
• 2012

Microvascular reconstruction, in the oral and maxillofacial regions, is a widely accepted as the best way to overcome the complex oral cavity defects. Many patients requiring composite reconstructions have been treated previously with radiation therapy, chemotherapy, selective and/or functional neck dissection or any of these combinations. In many cases of these patients, inadequate neck vessels for the microanastomosis of free flap are available, due to a lack of recipient vessels in the neck, poor vessel quality or vessel caliber mismatch. To achieve a tension-free anastomosis, vein grafting must be considered to span the vessel gap between the free flap pedicle and the recipient neck vessels. Although most microsurgeons believed that interpositional grafts are to be avoided due to vessel thrombosis and increased number of necessary microanastomosis, we, authors have some confidence of equivalency between reconstruction with and without interpositional saphenous vein graft. The great saphenous vein, also known as the long saphenous vein, is the large subcutaneous superficial vein of the leg and thigh. It joins with the femoral vein in the region of femoral triangle at the saphenofemoral junction, and coursed medially to lie on the anterior surface of the thigh before entering an opening in the fascia lata, called the saphenous opening. For a better understanding of the great saphenous vein graft for the interpositional vessel graft in the oral cavity reconstructions, and an avoidance of any uneventful complications during these procedures, the related surgical anatomies with their harvesting tips are summarized in this review article in the Korean language.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.1
• /
• pp.67-93
• /
• 1991

In general, marine casualities take palace by the composite action of three elements such as waterway condition, vessel condition and man condition. One of the important characteristics of most marie casualties for small cargo vessels in maritime transportation of near-coastal and greater-coasting seas in that the same kind of casualities take place repeatedly in spite of the apprent causes, Because, it takes much time and effort for seamen to master waterway, vessel or operatin technique only to the practical and sensible level. In these days, with the development of our economy, our shiypping industry has grown and therefore the demand of marine officers has increased. This economic growth brought about undesirable situation like the evasion of seamen and frequent casualities of Korea vessels. These marine casualities are being caused mainly by the unskilfulness of operating technique as well as the bad waterway condition and ship's installation condition. Therefore, I conclude, in this paper, that the most efficient and economic preventing measures of marine casualities are seeking causes and removing them in advance under the close coperation system among all concerned parties.