• 제목/요약/키워드: Composite thin film

검색결과 271건 처리시간 0.026초

합판(合板) 대용(代用) 박판상(薄板狀) 복합재(複閤材) 제조(製造)에 관(關)한 연구(硏究) (II) -최상제조조건(最適製造條件)을 적용(適用)한 구성형태별(構成形態別) 박판상(薄板狀) 복합재(複閤材) 개발(開發)- (Studies on Manufacture of Thin Composite Panel for Substitute Use of Plywood (II) - Development of Thin Composite by Composition Type Applied to Optimum Manufacturing Condition -)

  • 이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권4호
    • /
    • pp.74-84
    • /
    • 1995
  • Eight types of thin composite panels were manufactured by press-lam and mat-forming process applied to optimum manufacturing condition, studied in former first research by author (1995). They were tested and compared with control boards on dimensional stability, internal bond strength, tensile strength, Screw withdrawal strength, and bending properties. These thin composite panels manufactured by mat-forming process were generally superior to those by press-lam in dimensional stability and mechanical properties. In the dimensional stability and mechanical properties of thin composite panels manufactured by mat-forming process, the thin composite panels (A and E type) composed of particle or sawdust core and veneer face with polyethylene film, were as good as those of common plywood (control board). Internal bond strength showed highest value in the thin composite panel(D type) which composed of particle core and polypropylene screen face with polyethylene film. The thin composite panels(G and H type) composed of sawdust or particle core and polypropylene screen face with polyethylene film by press-lam and mat-forming process, showed most highest value in dimensional stability and water absorption.

  • PDF

Permeation Properties of Composite Thin Film for Organic Based Electronic Devices

  • Kim, Kwang-Ho;Kim, Hoon;Lee, Joo-Won;Kim, Jai-Kyeong;Ju, Byeong-Kwon;Jang, Jin;Oh, Myung-Hwan;Han, Jeong-In
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.920-923
    • /
    • 2003
  • We fabricated composite materials as a pellet structure with the various kinds of inorganic material powder. The composite materials were deposited onto the plastic film by the electron beam evaporation and water vapor transmission rates (WVTRs) were measured by the MOCON facility. As a result of WVTRs, the composite materials had lower WVTR value than any other inorganic materials. So, these films were proposed to protect the organic light emitting device (OLED) from moisture and oxygen. We can consider that the composite thin-film is one of the more suitable candidates for the thin-film passivation layer in the OLED. And, we are processing the XRD, XPS and EPMA to analyze the property of the composite material. We will also analyze properties of the current-voltage and luminescence for lifetime both the composite thin-film passivated OLED and non-passivated OLED.

  • PDF

Preparation of Honeycomb-patterned Polyaniline-MWCNT/Polystyrene Composite Film and Studies on DC Conductivity

  • Kim, Won-Jung;Huh, Do-Sung
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권7호
    • /
    • pp.2345-2351
    • /
    • 2012
  • Conductive honeycomb-patterned polystyrene (PS) thin films were prepared by the formation of a polyaniline (PANI) thin layer on the surface of the patterned PS thin films using simple one-step chemical oxidative polymerization of aniline. The in situ chemical oxidation polymerization of aniline hydrochloride solution on the patterned structure of the PS films was conducted in the presence of multiwalled carbon nanotubes (MWCNT) to prepare the PANI-MWCNT/PS composite film. The concentration (wt %) of MWCNT was varied in the range of 1%-3% by weight. The dependence of surface morphology of the PANI/PS and PANI-MWCNT/PS composite film to the polymerization time was observed by scanning electron microscopy. The room temperature DC conductivity was obtained by the four-probe technique. The conductivity of the PANI-MWCNT/PS composite film was affected both by the MWCNT concentration and polymerization time. In addition, DC electrical field was loaded during the oxidative polymerization to affect the distribution of the MWCNT included in the composite film, varying the loading voltage in the range of 0.1-3.0 V. The conductivity of the PANI-MWCNT/PS composite film was increased as loading voltage rose. However, this increase stops at a voltage higher than the critical value.

열 처리를 통한 그래핀/폴리벤족사진 전도성 복합 박막 제조 (Preparation of Graphene/Polybenzoxazine Conductive Composite Thin Film through Thermal Treatment)

  • 고영수;차지정;임진형
    • 폴리머
    • /
    • 제37권4호
    • /
    • pp.513-517
    • /
    • 2013
  • 고내열성 고분자인 폴리벤족사진(PBZ)과 전도성 그래핀을 혼성화시켜 새로운 전도성 복합박막을 제조하는 연구를 처음으로 수행하였다. 단순한 열처리 공정에 의해 동시에 그래핀 옥사이드와 벤족사진 단량체를 환원 및 경화를 시켜 기계적/전기적 특성이 크게 향상된 그래핀/PBZ 복합 박막을 제조하였다. 그래핀/PBZ 복합 박막의 화학/결정 구조 및 형태학적 미세구조 분석으로부터 약 3 wt%의 그래핀이 복합 박막에 들어가더라도 그래핀이 비교적 균일하게 분산된다는 것을 알 수 있었다. 본 연구를 통하여 PBZ박막의 기계적 물성 향상과 동시에 도전성을 부여하는 효과적인 경로를 제공할 수 있었다.

구리박막의 넓이와 간격에 따른 melt-blown 부직포의 전자파 차폐 효과 (Electromagnetic Shielding Effectiveness of Melt-blown Nonwoven Fabric with Width and Interval of Thin Copper Film)

  • 신현세;손준식;김영상;정진수
    • 한국염색가공학회지
    • /
    • 제16권5호
    • /
    • pp.42-47
    • /
    • 2004
  • The main objective of this work is to develop melt-blown nonwoven fabric composite materials have electromagnetic shielding characteristics using thin copper film. Melt-blown nonwoven fabric is the matrix phase and thin copper films are the reinforcement of the composite materials. Thin copper films are incorporated as conductive fillers to provide the electromagnetic shielding property of the melt-blown nonwoven fabric. The width and interval of thin copper films in the nonwoven fabric are varied by changing 1, 3, 5 mm for thin copper film's width and 1, 3, 5 mm for thin copper film's interval. The shielding effectiveness(SE) of various melt-blown nonwoven fabrics is measured in the frequency range of 50 MHz to 1.8 GHz. The variations of SE of melt-blown nonwoven fabric with width and interval of thin copper films are described. Suitability of melt-blown nonwoven fabric for electromagnetic shielding applications is discussed. The results indicate that the melt-blown nonwoven fabric composite material using thin copper film can be used for the purpose of electromagnetic shielding.

폴리머-탄소나노튜브 복합체 에어로졸 입자의 생성 및 이를 이용한 하이브리드 복합체 박막 제조 (Synthesis of Polymer-Carbon Nanotubes Composite Nanoparticles and Their Applications into Forming Hybrid Composite Thin Films)

  • 김휘동;안지영;김수형
    • 한국입자에어로졸학회지
    • /
    • 제6권2호
    • /
    • pp.61-67
    • /
    • 2010
  • In this paper, we describe a new method to form polymer thin films, in which carbon nanotubes (CNTs) are homogeneously distributed so that they can strengthen the mechanical property of resulting polymer film. To do so, we first homogeneously mixed CNTs with polymer in a DMF solvent. With the assistance of ultrasonic nebulizer, the polymer/CNT solution was then aerosolized into micro-sized droplets and finally turned into solidified polymer/CNT composite particles by gas-phase drying process. As the results of SEM and TEM analysis, CNTs were found to be homogeneously immobilized in the polymer matrix particles due to rapid drying process in the gas phase. For comparison purpose, (i) the polymer/CNTs composite particles prepared by aerosol processing method and (ii) polymer/CNTs sheets prepared by simple solution-evaporation method were employed to form polymer/CNTs composite thin films using a hot press. As the result, the aerosol processing of composite particles was found to be a much more effective method to form homogeneously distributed-CNTs in the polymer matrix thin film.

기상중합법으로 제조된 Poly(3,4-ethylenedioxythiophene)(PEDOT)-금속산화물 복합 박막의 물리화학적 물성 향상에 관한 연구 (Study on the Improvement of Physicochemical Properties of PEDOT-Metal Oxide Composite Thin Film by Vapor Phase Polymerization)

  • 남미래;임진형
    • 폴리머
    • /
    • 제36권5호
    • /
    • pp.599-605
    • /
    • 2012
  • 기상중합으로 제조된 poly(3,4-ethylenedioxythiophene)(PEDOT) 박막을 다양한 금속 알콕사이드 졸 용액으로 후처리하여 내용제성, 내스크래치성, 연필경도와 같은 물리화학적 특성을 효과적으로 개선하였다. 기상중합으로 제조된 PEDOT 층위에 금속 알콕사이드의 졸-젤 공정으로부터 유도된 금속 산화막이 형성되어 전기적 특성의 큰 손실 없이 기계적 물성을 증대시킬 수 있었다. 금속 알콕사이드 졸은 다양한 기능기를 가지는 실리콘 및 티타늄계 알콕사이드 화합물을 사용하였다. 이 중에서 tetraethyl orthosilicate를 기반으로 한 금속 알콕사이드 졸을 사용한 경우의 PEDOT-금속산화물 복합 박막이 표면저항, 투과도 및 다양한 물리화학적 물성 관점에서 가장 우수하였다. PEDOT-금속산화물 복합 박막의 전기적, 광학적, 물리화학적 특성 관점에서의 최적화를 위하여 금속 알콕사이드 졸의 함량, 산화제 함량, 후처리 후의 건조온도에 따른 효과를 살펴보았다.

압전필름센서를 이용한 복합재 평판의 저속충격 손상개시 모니터링 (Monitoring of Low-velocity Impact Damage Initiation of Gr/Ep Panel Using Piezoelectric Thin Film sensor)

  • 이관호;박찬익;김인걸;이영신
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2001년도 추계학술발표대회 논문집
    • /
    • pp.174-178
    • /
    • 2001
  • The piezoelectric thin film sensor can be used to interpret variations in structural and material properties, e.g. for structural integrity monitoring and assessment. To illustrate one of this potential benefit, PVDF film sensors are used for monitoring impact damage initiation in Gr/Ep composite panel. Both PVDF film sensors and strain gages are surface mounted to the Gr/Ep specimens. A series of impact test at various impact energy by changing impact mass and height is performed on the instrumented drop weight impact tester. The sensor responses are carefully examined to predict the onset of impact damage such as matrix cracking, delamination, and fiber breakage, etc. Test results show that the particular waveforms of sensor signals implying the damage initiation and development are detected above the damage initiation impact energy. As expected, the PVDF film sensor is found to be more sensitive to impact damage initiation event than the strain gage.

  • PDF

유기 EL 보호층으로 적용하기 위한 무기 복합 박막의 투습율 특성 연구 (Study on the Water Vapor Permeation Properties of the Inorganic Thin Composite Film for the Passivation Layer in the OLED)

  • 김광호;이주원;김영철;주병권;김재경
    • 한국전기전자재료학회논문지
    • /
    • 제17권4호
    • /
    • pp.432-438
    • /
    • 2004
  • In this study, we investigated the WVTRs Properties of inorganic thin composite films(ITCFs) to be newly adopted as the passivation layer of the OLED to replace the inorganic compound material Because we thought that inorganic compound materials were limited to enhance the barrier property of thin film. So, ITCFs were fabricated by mixing the cooperated material with the base material. And then, ITCFs were deposited onto the plastic substrate using the electron beam evaporation system and the water vapor transmission rates(WVTRs) were measured using the Mocon equipment. As a result of the WVTR measurement, we could analyze the WVTR values for various ITCFs. ITCFs had a remarkably lower value than the inorganic compound film. Through the analysis of thin film, we can understand the crystal structure and mixed amount. Therefore, ITCFs can be used as the inorganic passivation layers of OLED with the inorganic compound film.

친환경용매 기반의 술폰화 폴리아릴렌 에테르 술폰 랜덤 공중합체 Thin Film Composite 제조 (Preparation of Disulfonated Poly(arylene ether sulfone) Random Copolymer Thin Film Composite Membranes Using a Benign Solvent)

  • 이창현;제임스 맥그라스;베니프리만
    • 멤브레인
    • /
    • 제24권4호
    • /
    • pp.292-300
    • /
    • 2014
  • 내염소성을 갖는 염제거공정용 술폰화 폴리아릴렌 에테르 술폰 랜덤 공중합체(SPAES) thin film composite (TFC)막이 모노글라임 용매를 이용하여 제조되었다. 모노글라임은 선택층인 SPAES만을 용해시키며, 다공성 폴리술폰(예 : Udel$^{(R)}$)층에 대해 비용해성을 지녀, TFC 제조를 위한 선택적 용매로 사용될 수 있다. 또한 개미산이나 디에틸글리콜과는 달리, 환경적으로 무해하며, 매우 낮은 끊는점을 지녔다는 점이 또 다른 장점이 될 수 있다. 다공성 Udel$^{(R)}$ 지지체 위에 코팅시, 코팅용액이 기공구조에 침투하여 유수량을 감소시키는 기공투과현상이 발생하는데, 이를 최소화하기 위해 지지체를 이소프로필알콜과 글리세린 혼합액에서 전처리 후에, 코팅-건조 공정을 통해 결함이 없는 SPAES TFC로 제조된다. 또한, SPAES 선택층의 술폰화도, 고정이온의 염상태 및 물리-화학적 가교효과를 SPAES TFC막을 통한 투과거동과 관련하여 관찰하였다.