• 제목/요약/키워드: Composite system

검색결과 3,339건 처리시간 0.033초

제품 이송 시 결함 최소화를 위한 CFRP 이중 롤러의 Gap block 설계 전략 (A Strategy of a Gap Block Design in the CFRP Double Roller to Minimize Defects during the Product Conveyance)

  • 양승지;박영준;김성은;안준걸;양현익
    • Composites Research
    • /
    • 제37권1호
    • /
    • pp.7-14
    • /
    • 2024
  • 이중 롤러는 Gap block 설계에 따라 동일한 크기와 하중 조건에서도 다양한 변형 양상을 가질 수 있다. 이러한 특성을 활용하여, 본 연구에서는 제품 이송 과정에서 발생되는 주름과 같은 결함을 최소화하기 위한 Carbonfiber reinforced plastic (CFRP) 이중 롤러의 Gap block 설계 방법을 제안한다. 가장 먼저, Gap block에 대한 주요 설계 변수와 공정 정밀도를 고려한 분석 case들을 선정하고, 유한 요소 해석을 활용하여 CFRP 이중 롤러의 변형 양상을 추출한다. 여기서, 본 연구의 목적을 만족하는 최적의 Gap block 설계를 수행하기 위해, 제품과 롤러가 접촉하는 지점들 간의 변형 편차에 기반하여 CFRP 이중 롤러의 변형 양상들을 비교 분석한다. 그 결과, 본 연구에서 제안한 Gap block 설계 방법을 통해, 롤러의 직경 또는 길이와 같은 전체적인 크기 변화없이 제품 이송 시 결함을 크게 감소시킬 수 있는 최적화된 CFRP 이중 롤러를 구축할 수 있었다.

개질 폴리에틸렌 코팅 강관의 부착 및 체결부 성능 평가 연구 (Experimental Study on the Adhesion and Performance Evaluation of Joints for Modified Polyethylene Coated Steel Pipes)

  • 이명규;조상환;김민욱
    • Composites Research
    • /
    • 제37권3호
    • /
    • pp.238-245
    • /
    • 2024
  • 본 연구에서는 강관의 효율적 유지관리를 위한 모니터링 시스템 개발 연구의 일환으로 개질 폴리에틸렌 코팅 처리된 강관의 성능 평가를 위한 실험적 연구를 수행하였다. 기존 방식인 기계적 전처리 코팅의 경우 확관시 폴리에틸렌 부착이 저하되는 현상이 발생하여 이를 해결하고자 칼슘 혼입 인산 아연 피막을 활용한 화학적 전처리 공정이 적용되었다. SEM 및 EDX 분석결과, Zn/Ca 비 1.0에서 가장 치밀한 구조가 확인되었다. 또한, 확관 시의 코팅 이탈 방지를 위한 그라프트 처리 무수말레산을 기반으로 엘라스토머, 금속산화물, 블로킹방지제, 슬립제를 각기 다른 조합으로 혼입하여 개질된 폴리에틸렌 코팅 강관에 대한 부착 및 연신율 평가를 실시하였다. 그 결과, 모든 개질 재료를 혼입한 시험체(S4)에서 금속산화물만 혼입한 시험체(S2)대비 25% 이상 향상된 성능을 확인하였다. 마지막으로, 공정이 완료된 코팅 파이프에 대하여 표면부 코팅 손상 방지를 위한 파이프 고정 부속 일부인 쐐기형 소켓링과 이탈 방지 압륜을 개발하고 성능평가를 수행하였다.

몬테칼로 계산을 통한 흡수선량 재구성의 임상적 응용: 변형된 팬텀에서의 총제적 선량재구성 (Clinical Application of Dose Reconstruction Based on Full-Scope Monte Carlo Calculations: Composite Dose Reconstruction on a Deformed Phantom)

  • Yeo, Inhwan;Xu, Qianyi;Chen, Yan;Jung, Jae Won;Kim, Jong Oh
    • 한국의학물리학회지:의학물리
    • /
    • 제25권3호
    • /
    • pp.139-142
    • /
    • 2014
  • 본 연구의 목적은 흡수선량 재구성, 방사선 치료간의 재구성된 선량의 등록, 선량-체적 히스토그램의 생산등을 수행하는 선량 재구성의 임상적 응용시스템을 만들고 그것을 변형된 전립선 팬텀에 적용하는 것이다. 이를 위해 변형가능한 전립선 팬텀을 20 cm 깊이와 40 cm너비의 물팬텀에 집에 넣었다. 이것의 영상을 얻고, 전립선, 정낭 및 항문의 윤곽을 그렸다. 동일 평면에서 네개의 조사문을 이용하여 세기 변조계획을 세웠다.항문에 20 ml의 물풍선을 삽입하여 장기를 변형시켰다. 영상을 다시 획득하여 위 장기의 윤곽을 그렸다. XVMC몬테칼로 코드를 사용하여 두 팬텀및 EPID내에서 선량반응 인자를 계산하였다. 세기변조계획에서 얻어진 방사선을 두팬텀에 조사하여 EPID에서 적분형 영상을 얻었다. Demons 방법을 사용하여 변형된 팬텀을 변형전 팬텀에 등록시켰다. 이를 통해 단위체적별 위치변이 정보를 얻었고 이를 이용해 두 팬텀의 재 구성된 선량을 합하여 변형전 팬텀에 생산해 냈다. 순방향으로 계산된 치료계획 선량을 합산된 재구성된 선량과 비교하였다. 200 cGy에서 전립선과 정낭이 받든 체적은 차이를 거의 보이지 않았으나, 210 cGy 이상에서는 3%가량 차이를 보였다. 항문에서는 150-200 cGy영역에서 재구성된 선량에 의하여 받은 체적은 치료 계획과 비교하여 3% 이상 적었다. 본 연구를 통하여 선량 재구성의 임상적 응용시스템이 성공적으로 만들어 졌다. 변형된 전립선 팬텀에 적용되어 작지 않은 선량의 차이를 목표장기와 보호 장기에 보였다.

니켈-크롬 합금에 대한 다용도 접착 시스템의 전단결합강도 (Shear bond strength of Universal bonding systems to Ni-Cr alloy)

  • 송소연;손병화;김종엽;신상완;이정열
    • 대한치과보철학회지
    • /
    • 제53권4호
    • /
    • pp.295-300
    • /
    • 2015
  • 목적: 레진과 니켈-크롬 합금의 결합력에 미치는 금속 프라이머 및 다용도 접착제의 영향에 대하여 비교 평가하고자 한다. 재료 및 방법: 실험을 위해 120개의 니켈-크롬 합금(Vera Bond 2V) 디스크를 제작하여 아크릴 레진 실린더에 포매하였다. 시편의 표면은 220 grit, 600 grit의 실리콘 카바이드지로 연마한 뒤 $50{\mu}m$의 알루미늄옥사이드 입자를 분사하여 처리하였다. 실험군은 메탈 프라이머의 적용(Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer)과 다용도 접착 시스템(Single Bond Universal, All Bond Universal)에 따라 6개 군으로 나뉘었다. 각 시편의 중앙에 높이 2 mm, 직경 3 mm로 복합레진을 충전하였으며, 제작된 모든 시편은 $37^{\circ}C$ 증류수에서 24시간 보관하였다. 만능시험기에 시편을 위치시킨 후 1 mm/min cross head speed로 전단결합강도를 측정하였다. 통계분석은0.05의 유의수준으로 일원분산분석을 시행하였고 Tukey's multiple coMParison test로 사후검정을 하였다. 결과: Single Bond Universal, All Bond Universal, Metal Primer II 3개 군과 Alloy Primer, MKZ Primer, Metal & Zirconia Primer 3개 군 사이에 통계학적으로 유의한 차이를 보였다(P<.001). 결론: 니켈-크롬 합금에 대한 다용도 접착 시스템의 전단결합강도는 Metal Primer II를 제외한 기존의 금속 프라이머를 적용했을 때 보다 높게 나타났다. 본 실험에서 더 나아가 다용도 접착 시스템 내 실란(Silane) 포함 여부에 따른 효과를 평가할 수 있는 연구가 필요할 것이다.

고준위폐기물처분시스템 설계 제한온도 설정에 관한 기술현황 분석: 벤토나이트 완충재를 중심으로 (A review on the design requirement of temperature in high-level nuclear waste disposal system: based on bentonite buffer)

  • 김진섭;조원진;박승훈;김건영;백민훈
    • 한국터널지하공간학회 논문집
    • /
    • 제21권5호
    • /
    • pp.587-609
    • /
    • 2019
  • 본 연구에서는 고준위폐기물 처분장 내 완충재 로 제시되고 있는 벤토나이트의 재료적인 측면에서 장 단기 처분 안정성을 분석하였으며, 처분효휼 향상을 위한 완충재 디자인 관련 대안개념에 대해 연구동향을 분석하였다. 일반적으로 $150{\sim}250^{\circ}C$ 사이에서 온도증가 및 증기발생 등으로 인해 완충재의 수리전도도와 팽윤능에 비가역적인 변화가 발생한다고 보고된다. 하지만 완충재의 최고온도가 최소한 $150^{\circ}C$를 초과하지 않는다면 온도가 벤토나이트 완충재의 재료적, 구조적 그리고 광물학적 안전성에 미치는 영향은 크지 않는 것으로 분석되었다. 완충재 최고온도 제한은 심층처분장 단위면적에 처분할 수 있는 폐기물의 양을 제한하여 처분효율을 결정하며, 나아가 처분부지의 확보 가능성에까지 영향을 미치는 중요한 설계 인자이다. 따라서 고온이 완충재의 성능에 미치는 영향을 규명함으로써 완충재의 최고온도 제한을 완화하고, 이를 통해 심층처분장의 처분밀도 향상과 처분장 설계의 최적화를 도모할 필요가 있다. 이와 더불어 처분효율을 극대화하기 위해서는 복합소재(흑연, 실리카 등) 및 다중구조(전도층, 절연층 등)의 고기능성 공학적방벽재 개발과 다층처분장(multilayer repository)으로 처분장 레이아웃을 변경하는 방법 등을 병행하여 검토할 필요가 있다. 이는 처분사업의 신뢰성 및 국민 수용성 확보에 큰 기여를 할 수 있을 것으로 판단된다.

Poly-ether-ketone-ketone (PEKK) 포스트로 수복한 근관 치료 치아의 정적 파절 저항성 및 파절 형태에 관한 평가 (Evaluation of static fracture resistances and patterns of pulpless tooth restored with poly-ether-ketone-ketone (PEKK) post)

  • 박하은;이철원;이원섭;양성은;이수영
    • 대한치과보철학회지
    • /
    • 제57권2호
    • /
    • pp.127-133
    • /
    • 2019
  • 목적: 본 연구의 목적은 주조 금속 포스트, 기성 섬유강화형 포스트 그리고 치과영역에서 새롭게 주목 받고 있는 재료인 polyetherketoneketone(PEKK)으로 제작한 포스트로 수복된 근관 치료 치아의 파절 강도 및 파절 양상에 대해 조사하는 것이다. 재료 및 방법: 총 21개의 하악 소구치를 포스트 재료에 따라 각각 7개씩 3개의 군으로 무작위로 분류하였다. 그룹 A는 주조 금속 포스트 코어; 그룹 B는 기성 섬유강화형 포스트 및 레진 코어; 그룹 C는 밀링된 PEKK 포스트 코어로 수복하였다. 모든 시편은 금속관으로 수복하였다. 각각의 시편들을 제작 후 만능 시험기를 사용하여 2 mm/min 속도로 치아 장축에 대해 135도의 정적 하중을 가하여 파절 강도를 측정하고, 파절 양상에 대해 조사하였다. 결과 분석은 유의수준 ${\alpha}=.05$에서 Kruskal-Wallis test 후 사후검정으로 Mann-Whitney U test를 시행하였다. 결과: PEKK 포스트 파절 강도는 주조 금속 포스트와 기성 섬유강화형 포스트에 비해 낮은 값을 보였다. 파절양상에 있어서는 육안과 현미경, 방사선 사진을 통해 살펴본 결과 금속 포스트 코어에서는 치근파절의 양상이 대부분 나타난 반면 기성 섬유 강화형포스트는 포스트의 탈락이 주로 발생하였다. PEKK 포스트 코어의 경우 치아와 포스트가 함께 파절되는 양상이 주로 나타났다. 결론: 치관부 치질이 심하게 손상된 치아 수복 시 적절한 재료의 선택이 필요하며, PEKK 포스트의 임상적 적용을 위해서는 강도 향상에 대한 연구가 더 필요할 것으로 보인다.

가정간호 사업에 대한 의사, 간호사, 진료관련부서 직원 및 환자의 인식 비교 (A Study on Differences of Opinions on Home Health Care Program among Physicians, Nurses, Non-medical personnel, and Patients.)

  • 김용순;임영신;전춘영;이정자;박지원
    • 대한간호
    • /
    • 제29권2호
    • /
    • pp.48-65
    • /
    • 1990
  • The government has adopted a policy to introduce Home Health Care Program, and has established a three stage plan to implement it. The three stage plan is : First, to amend Article 54 (Nurses for Different Types of Services) of the Regulations for Implementing the Law of Medical Services; Second, to tryout the new system through pilot projects established in public hospitals and clinics; and third, to implement at all hospitals and equivalent medical institutions. In accordance with the plan, the Regulation has been amend and it was promulgated on January 9,1990, thus establishing a legal ground for implementing the policy. Subsequently, however, the Medical Association raised its objection to the policy, causing a delay in moving into the second stage of the plan. Under these circumstances, a study was conducted by collecting and evaluating the opinions of physicians, nurses, non-medical personnel and patients on the need and expected result from the home health care for the purpose of help facilitating the implementation of the new system. As a result of this study, it was revealed that: 1. Except the physicians, absolute majority of all other three groups - nurses, non-medical personnel and patients -gave positive answers to all 11 items related to the need for establishing a program for Home Health Care. Among the physicians, the opinions on the need for the new services were different depending on their field of specialty, and those who have been treating long term patients were more positive in supporting the new system. 2. The respondents in all four groups held very positive view for the effectiveness and the expected result of the program. The composite total of scores for all of 17 items, however, re-veals that the physicians were least positive for the- effectiveness of the new system. The people in all four groups held high expectation on the system on the ground that: it will help continued medical care after the discharge from hospitals; that it will alleviate physical and economic burden of patient's family; that it will offer nursing services at home for the patients who are suffering from chronic disease, for those early discharge from hospital, or those who are without family members to look after the patients at home. 3. Opinions were different between patients( who will receive services) and nurses (who will provide services) on the types of services home visiting nurses should offer. The patients wanted "education on how to take care patients at home", "making arrangement to be admitted into hospital when need arises", "IV injection", "checking blood pressure", and "administering medications." On the other hand, nurses believed that they can offer all 16 types of services except "Controlling pain of patients", 4. For the question of "what types of patients are suitable for Home Health Care Program; " the physicians, the nurses and non-medical personnel all gave high score on the cases of "patients of chronic disease", "patients of old age", "terminal cases", and the "patients who require long-term stay in hospital". 5. On the question of who should control Home Health Care Program, only physicians proposed that it should be done through hospitals, while remaining three groups recommended that it should be done through public institutions such as public health center. 6. On the question of home health care fee, the respondents in all four groups believed that the most desireable way is to charge a fixed amount of visiting fee plus treatment service fee and cost of material. 7. In the case when the Home Health Care Program is to be operated through hospitals, it is recommended that a new section be created in the out-patient department for an exclusive handling of the services, instead of assigning it to an existing section. 8. For the qualification of the nurses for-home visiting, the majority of respondents recommended that they should be "registered nurses who have had clinical experiences and who have attended training courses for home health care". 9. On the question of if the program should be implemented; 74.0% of physicians, 87.5% of non-medical personnel, and 93.0% of nurses surveyed expressed positive support. 10. Among the respondents, 74.5% of -physicians, 81.3% of non-medical personnel and 90.9% of nurses said that they would refer patients' to home health care. 11. To the question addressed to patients if they would take advantage of home health care; 82.7% said they would if the fee is applicable to the Health Insurance, and 86.9% said they would follow advises of physicians in case they were decided for early discharge from hospitals. 12. While 93.5% of nurses surveyed had heard about the Home Health Care Program, only 38.6% of physicians surveyed, 50.9% of non-medical personnel, and 35.7% of patients surveyed had heard about the program. In view of above findings, the following measures are deemed prerequisite for an effective implementation of Home Health Care Program. 1. The fee for home health care to be included in the public health insurance. 2. Clearly define the types and scope of services to be offered in the Home Health Care Program. 3. Develop special programs for training nurses who will be assigned to the Home Health Care Program. 4. Train those nurses by consigning them at hospitals and educational institutions. 5. Government conducts publicity campaign toward the public and the hospitals so that the hospitals support the program and patients take advantage of them. 6. Systematic and effective publicity and educational programs for home heath care must be developed and exercises for the people of medical professions in hospitals as well as patients and their families. 7. Establish and operate pilot projects for home health care, to evaluate and refine their programs.

  • PDF

목질(木質)의 열수추출(熱水抽出) 및 CaCl2 첨가(添加)가 목질(木質)-세멘트 보드의 휨강도(强度) 및 팽윤율(膨潤率)에 미치는 영향(影響) (The Effects of Hot Water Extraction of Wood Meal and the Addition of CaCl2 on Bending Strength and Swelling Ratio of Wood-Cement Board)

  • 안원영;신동소;최돈하
    • Journal of the Korean Wood Science and Technology
    • /
    • 제13권3호
    • /
    • pp.49-53
    • /
    • 1985
  • The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

  • PDF

상아질의 봉쇄 시기와 표면처리 방법이 미세인장 결합강도에 미치는 영향 (Influence of air abrasion and different dentin sealing techniques on microtensile bond strength to dentin)

  • 강동호;한종현;박정원;김선재
    • 대한치과보철학회지
    • /
    • 제48권1호
    • /
    • pp.8-15
    • /
    • 2010
  • 연구 목적: 본 연구에서는 자가부식 접착제를 이용한 즉시 상아질 봉쇄 (immediate dentin sealing; IDS)와 지연 상아질 봉쇄 (delayed dentin sealing; DDS)에서 상아질 접착제의 결합강도를 비교하고 즉시 상아질 봉쇄에서 접착제 표면의 오염물을 제거하기 위해 사용되는 air abrasion이 상아질에 대한 미세 인장 결합강도에 어떠한 영향을 주는지에 대해 평가하였다. 연구 재료 및 방법: 1개월 이내에 발거된 사람의 건전한 대구치 30개를 6개의 군으로 분리하였고 상아질 접착제로는 자가부식 접착제 Clearfil SE bond (Kuraray, Okayama, Japan)를 사용하였다. 군분류는 치관부를 삭제하여 상아질을 노출시킨 후 즉시 접착제를 도포하고 복합레진 Filtek Z250 (3M ESPE, St Paul, MN, USA)을 충전한 군을 대조군 (Control), 노출된 상아질에 즉시 상아질 접착제를 도포하고 2주 후 재차 접착제를 도포해 복합레진과 같이 광중합하는 즉시 상아질 봉쇄군 (IDS), 상아질 노출 후 상아질 접착을 즉시 시행하지 않고 2주 후 상아질 접착과 복합레진의 충전을 시행하는 지연 상아질 봉쇄군 (DDS)으로 분류하였다. 그후Control군에 air abrasion을 시행한 군을 C-A, IDS군에 air abrasion을 시행한 군을 IDS-A군, DDS군에 air abrasion을 시행한 군을DDS-A군으로 세분화하였다. Control군과 C-A을 제외한 모든 군은 2주간 Fermit을 이용한 임시수복기간을 두었으며 대조군과 실험군 모두 미세인장 결합강도 실험 전 24시간동안 증류수에 보관 후 미세인장 결합강도를 측정하였다. 측정된 미세인장 결합강도는 one-way ANOVA를 이용하여 비교 분석하였으며 유의차가 있는 경우 Scheffe test를 이용한 사후검증을 시행하였다. 결과: 1. 자가부식 상아질 접착제인 Clearfil SE bond를 치아 삭제 직후 상아질 접착을 시행하고 2주간 임시수복 기간을 거친 후 접착제를 재도포하고 복합레진을 수복한 군과 치아삭제 후 2주간의 임시수복기간을 거친 후 상아질 접착을 시행하고 복합레진을 수복한 군 사이에 상아질-레진 간 미세인장 결합강도는 유의한 차이가 없었다 (P>.05). 2. 자가부식 상아질 접착제인 Clearfil SE bond를 상아질 접착 시행 전 $50{\mu}m$ 크기의 aluminum oxide particle로 air abrasion 처리하는 것은 상아질-레진 간 미세인장 결합강도에 유의한 영향을 주지 않았다 (P>.05).

Nitromethane 분해를 위한 초임계수 산화(SCWO) 공정 최적화 (Optimization of Supercritical Water Oxidation(SCWO) Process for Decomposing Nitromethane)

  • 한주희;정창모;도승회;한기도;신영호
    • Korean Chemical Engineering Research
    • /
    • 제44권6호
    • /
    • pp.659-668
    • /
    • 2006
  • 실험계획법을 이용하여 nitromethane을 초임계수산화(SCWO)로 분해시키는 공정의 최적화 연구를 진행하였다. Lab scale 반응설비를 이용하여 처리수의 COD와 T-N을 최소화하는 SCWO 공정의 최적 운전조건을 도출하였으며, scale-up 문제점을 파악하기 위해 SCWO pilot plant 실험 결과와 lab scale 최적화 실험 결과를 비교하였다. 처리수의 COD와 T-N을 최적화 목적 변수(KPOV)로 설정하였으며, 예비실험을 통해 반응 온도(temp)와 nitromethane과 암모니아수의 몰 비(NAR)를 주요 운전 변수(KPIV)로 설정하였다. 최적화 실험은 통계적 실험계획법인 중심합성설계법을 사용하였으며, 실험결과의 해석은 반응표면법을 활용하였다. 주 효과 분석결과 처리수의 COD는 Temp 증가에 따라 급격하게 감소하며, NAR 증가에 따라 약간 감소하는 것으로 나타났으며, T-N은 Temp 와 NAR 증가에 따라 감소하였다. Temp가 $420{\sim}430^{\circ}C$로 낮을 때에는 NAR 증가에 따라 T-N이 급격히 감소하였으나, $450^{\circ}C$ 이상으로 높을 때에는 큰 변화가 없었다. 최적화 실험 결과를 회귀분석 하여 처리수의 COD와 T-N 을 예측할 수 있도록 Temp와 NAR이 변수인 2차식으로 회귀식을 도출하였으며, 결정계수($r^2$)와 표준화잔차의 정규성을 분석하여 회귀식이 실험결과를 잘 모사하는 것을 확인하였다. 회귀식을 이용하여 COD < 2 mg/L, T-N<40 mg/L를 동시에 만족시키며 부식 위험이 적은 nitromethane 분해 최적 운전 조건은 Temp $450-460^{\circ}C$, NAR 1.03-1.08로 설정하였다. SCWO pilot plant를 이용하여 nitromethane 분해 최적 조건을 검증하고, SCWO 공정의 scale-up 문제점을 파악하는 연구를 실시하였다. SCWO pilot plant 실험 결과를 lab scale 반응설비에서 도출한 COD와 T-N의 회귀식과 비교한 결과 오차가 증가하지만 회귀식이 pilot plant 실험결과도 잘 나타내는 것을 확인할 수 있었다. Pilot plant 실험결과에 대한 회귀식의 적합성은 실험값과 예측값의 비교도와 표준화잔차의 정규성으로 검증하였다.