• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.199-205
• /
• 2004

라디에이션(radiation) 문제를 해결하기 위해서 중합격자법을 개발하였다. 중합격자계는 이동격자계와 고정격자계로 이루어져 있으며, 이동격자계는 운동하는 물체에 적용되어 운동하는 물체와 동시에 이동된다. 이러한 수치계산법은 자유표면 부근에서 운동하는 몰수평판에 작용하는 라디에이션 유체력을 계산하는데 응용되었다. 현재의 수치계산법에 의한 결과는 실험값 및 선형포텐셜 이론에 의한 결과와 상호 비교하였으며, 수치계산의 신뢰성을 확인하였다. 그리고, 몰수평판에 작용하는 비선형 점성감쇄효과에 대하여 평가하였다.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.77-83
• /
• 2012

Since power system is switching to smart grid, on-line monitoring technology has become necessary for underground distribution power cable. Therefore, the application of DTS(Distributed Temperature Sensing) technology using OFCPC(Optical Fiber Composite Power Cable) capable of monitoring underground distribution power cables has been developed. These can bring about reductions in faults and increases in operating capacity of underground distribution system. To date, the test-bed of optical fiber composite power cable on-line monitoring system has been constructed. Then, matters to be improved have been drawn through verification experiments. This paper presents the improvement and experiment results of the optical fiber composite power cable on-line monitoring system to apply to underground distribution lines in the field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.275-278
• /
• 2006

This paper describes a probabilistic annual congestion cost assessment of a grid at a composite power system derived from a model. This probabilistic congestion cost assessment simulation model includes capacity limitation and uncertainties of the generators and transmission lines. In this paper, the proposed probabilistic congestion cost assessment model is focused on an annualized simulation methodology for solving long-term grid expansion planning issues. It emphasizes the questions of "how should the uncertainties of system elements (generators, lines and transformers, etc.) be considered for annual congestion cost assessment from the macro economic view point"? This simulation methodology comes essentially from a probabilistic production cost simulation model of composite power systems. This type of model comes from a nodal equivalent load duration curve based on a new effective load model at load points. The characteristics and effectiveness of this new simulation model are illustrated by several case studies of a test system.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1645-1655
• /
• 2016

A Dynamic Voltage Restorer (DVR) model is proposed to eliminate the short-term voltage disturbances that occur in the grid-connected mode, the switching between grid-connected mode and the stand-alone mode of a Microgrid. The proposed DVR structure is based on a conventional cascaded H-bridge multilevel inverter (MLI) topology; a novel composite control strategy is presented, which could ensure the compensation ability of voltage sag by the DVR. Moreover, the compensation to specified order of harmonic is added to implement effects that zero-steady error compensation to harmonic voltage in specified order of the presented control strategy; utilizing wind turbines-batteries units as DC energy storage components in the Microgrid, the operation cost of the DVR is reduced. When the Microgrid operates under stand-alone mode, the DVR can operate on microsource mode, which could ease the power supply from the main grid (distribution network) and consequently be favorable for energy saving and emission reduction. Simulation results validate the robustness and effective of the proposed DVR system.

• 한국인터넷방송통신학회논문지
• /
• 제8권6호
• /
• pp.89-95
• /
• 2008

분산 컴퓨팅 환경에서 모바일 서로게이트 시스템은 보안상의 문제로 인하여 널리 사용되고 있지 못하고 있다. 현재 가장 널리 사용되고 있는 그리드 미들웨어인 글로버스에서도 모바일 단말기를 인증하는 방법이 제공되고 있지 않아 그리드의 강력한 컴퓨팅 능력을 모바일 클라이언트까지 확장하는 것을 어렵게 하는 중요한 요인이 되고 있다. 본 논문에서는 PDA와 같이 컴퓨팅 파워가 미약한 모바일 단말기기와 그리드 호스트 간의 인터페이스 역할을 하는 게이트웨이를 두고 모바일 클라이언트가 이동 중 그리드 서비스를 이용할 수 있도록 하는 안전한 모바일 그리드서비스 프레임워크를 설계 구현하였다. 아울러, 이를 구현하여 ECG 신호처리를 위한 헬스케어 시스템에 적용하였다. 이 시스템은 이동 환경에서 환자의 생체 신호를 그리드 컴퓨팅으로 분석하여 원격에 있는 의료진이 진단할 수 있는 모바일 헬스케어에 활용가능하다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.121-124
• /
• 2003

This paper shows shear wave behavior of CFRP(carton fiber reinforced plastics) composite laminates as a polar grid form to evaluate vibration pattern of ultrasonic transducers, which gives measured modelling fundamental contents of nondestructive evaluation. This modelling decomposes the transmission of a linearly polarized wave into orthogonal components through each ply of a laminate. It is found that a high probability shows between the model and measurement system in characterizing lay up of CFRP composite laminates. Also evaluating quantitatively the defects in CFRP laminates who found to be possible of normalized frequency obtained from 2D-FFT technique based on C-scan method. Thus, the technique is proven to be one of the useful means to evaluate any internal defect in CFRP composite laminates.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.369-382
• /
• 2014

A growing dynamic electrical demand has created an increasing interest in utilizing nonconventional energy sources like Photovoltaic (PV), wind power, etc. In this context, this paper focuses on the design and development of a composite power controller (CPC) in the decoupled double synchronous reference frame (DDSRF) combining the advantages of direct power control (DPC) and voltage oriented control (VOC) for a PV sourced grid connected inverter. In addition, a controller with the inherent active filter configuration is tested with nonlinear and unbalanced loads at the point of common coupling in both grid connected and autonomous modes of operation. Furthermore, the loss and reactive power compensation due to a non-fundamental component is also incorporated in the design, and the developed DDSRF model subsequently allows independent active and reactive power control. The proposed developed model of the controller is also implemented using MATLAB-Simulink-ISE and a Xilinx system generator which evaluate both the simulated and experimental setups. The simulation and experimental results confirm the validity of the developed model. Further, simulation results for the DPC are also presented and compared with the proposed CPC to further bring out the salient features of the proposed work.

• 한국항공우주학회지
• /
• 제47권4호
• /
• pp.256-265
• /
• 2019

본 논문에서는 평직물 CFRP로 제작한 직교 격자 쉘의 굽힘 하중에 의한 점진적 손상 연구를 수행하였다. 직교 격자는 복합재 바닥면과 함께 경화하여 제작하였다. 굽힘을 받는 직교 격자 쉘의 점진적 손상 해석은 Hashin-Rotem 파손 기준과 Matzenmiller-Lubliner-Taylor (MLT) 모델으로 비선형 유한요소법을 이용하여 수행하였다. 또한, 직교 격자 쉘에 대한 3점 굽힘 시험을 수행하였으며, 시험 결과와 해석 결과를 비교하였다. 변형률과 변위에 대한 시험과 해석 결과는 유사하게 나타났다. 손상 영역은 점진적 손상 해석으로 예측하였으며, 육안 검사와 초음파 비파괴 검사를 통해 측정한 결과와 비교하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.787-798
• /
• 2013

This paper proposes a special power circuit topology and its corresponding control strategy for an energy recovery power accumulator battery pack testing system (PABPTS), which is particularly used in electric vehicles. Firstly, operation principle and related parameter design for the system are illustrated. Secondly, control strategy of the composite power converter for PABPTS is analyzed in detail. The improved scheme includes a high accuracy charge and discharge current closed loop. active power reference for the grid-side inverter is provided by the result of multiplication between battery pack terminal voltage and test current. Simulation and experimental results demonstrate that the proposed scheme could not only satisfy the requirements for PABPTS with wide-range current test, but also could recover the discharging energy to the power grid with high efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.11-14
• /
• 2004

In recent, the importance and necessity of some studies on reliability evaluation of grid comes from the recent black-out accidents occurred in the world. The quantity evaluation of transmission system reliability is very important under competitive electricity environment. The reason is that the successful operation of electric power under the deregulated electricity market depends on transmission system reliability management. This paper introduces features and operation modes of the Transmission Reliability Evaluation for Large-Scale Systems(TRELSS) Version 6.2, a program made in EPRI, for assessing reliability indices of composite power system. The package accesses not only bulk but also buses indices for reliability evaluation of composite powers system. The characteristics of the TRELSS program are illustrated by the case studies using the KEPCO system