• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.640-641
• /
• 2006

To improve the mechanical properties of WC-Co cemented carbides, the dual composite was studied. The compositions of granule and matrix were nano-sized WC-6 wt% Co(granule) and normal sized WC-20 wt% Co(matrix), respectively. The granules were grouped 50, 100 and $150\;{\mu}m$ and mixed with WC and Co powders as the volume fractions of granule to matrix were 50 to 50, 40 to 60 and 30 to 70. These compacts were sintered at $1380^{\circ}C$ for 10 minutes in vacuum. The microstructure, transverse rupture strength and wear resistance were investigated.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.443-452
• /
• 2019

In this study, TiO₂-polyvinyl alcohol (PVA) composite granules were prepared via spray drying technique. To investigate the effects of solid content and binder/powder ratio in the slurry on the granulation behavior of TiO₂ powders, the feed compositions were designed to vary over a wide range. The morphology, actual densities, and average granule size and size distribution of the TiO₂-PVA composite granules were characterized by using scanning electron microscopy technique, a gas pycnometer, and an image analyzing program (Image-J), respectively. The results indicate that solid content and the amount of PVA in the feedstock slurry are the dominant factors determining the granule morphology, size, and size distribution of TiO₂-PVA composite. Moreover, it was observed that increasing the solid content and the amount of PVA in the slurry improved the granulation process and reduced the granule defects. For the preparation of spherical TiO₂-PVA composite granules with the minimum amount of non-granulated powders, the optimized composition of the feedstock slurry was found to be 35 wt.% solid and 3 wt.% PVA.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.545-551
• /
• 2008

Fe/$Al_2O_3$ composite granules were prepared by combining sol-gel/oil drop method. The shape of granules were mainly determined by composition and concentration of aluminum precursor. The composite granule with the lowest aluminum concentration was synthesized with 0.75M boehmite solution. The prepared granules were tested as a catalyst in the plug-flow reactor for Fischer-Tropsch synthesis. Before the reaction, catalysts were activated by hydrogen reduction and synthesis gas treatment. The activation conditions and aluminum concentration have affected catalytic performance significantly.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.226-231
• /
• 2008

Cu/Fe/$Al_2O_3$ granules with various sizes have been prepared by a combination of sol-gel and oil drop method for the use in sulfur trioxide decomposition, a subcycle in thermochemical sulfur-iodine cycle to split water in the hydrogen and oxygen. The size of composite granules have been mainly changed by the flow-rate of the gel mixture before dropping in the synthesis. The structural properties of the samples were comparable with granule size. In the reaction, the catalytic activity was enhanced by decreasing size in the entire reaction temperature ranges.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.251-255
• /
• 2014

In this study, we optimized dissolution the dissolution conditions of porous amorphous powder to have high specific surface area. Porous metallic glass(MG) granules were fabricated by selective phase dissolution, in which brass is removed from a composite powder consisting of MG and 40 vol.% brass. Dissolution was achieved through various concentrations of $H_2SO_4$ and $HNO_3$, with $HNO_3$ proving to have the faster reaction kinetics. Porous powders were analyzed by differential scanning calorimetry to observe crystallization behavior. The Microstructure of milled powder and dissolved powder was analyzed by scanning electron microscope. To check for residual in the dissolved powder after dissolution, energy dispersive X-ray spectroscory and elemental mapping was conducted. It was confirmed that the MG/brass composite powder dissolved in 10% $HNO_3$ produced a porous MG granule with a relatively high specific surface area of $19.60m^2/g$. This proved to be the optimum dissolution condition in which both a porous internal granule structure and amorphous phase were maintained. Consequently, porous MG granules were effectively fabricated and applications of such structures can be expanded.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.935-940
• /
• 2009

In this research, the composites (100-x)LCP-xBNT (x = 0, 10, 20, 30, 40 vol.%) were fabricated with thermoplastic LCP(Liquid Crystal Polymer) and BNT($BaNd_2Ti_4O_{12}$) which is a high frequency dielectric material. Their dielectric properties, mechanical strength and microstructure were investigated by Impedance analyser, Instron and SEM. In order to fabricate LCP-BNT composites, LCP resin was put into the twin screw type mixer($310^{\circ}C$), melted by keeping for 10 min. After that, BNT filler was dispersed with melted LCP resin for 15 min. in the mixer. For measuring the dielectric properties and mechanical strength, Composite specimens were made by pressing composite granule (LCP-BNT) with 7 ton in the mold at $310^{\circ}C$. With increasing the BNT content (0~40 vol.%) of the composite, Its dielectric constant increased, dielectric loss and flexural strength decreased. The dielectric constant and flexural strength of composites with 20~30 vol.% of BNT filler are 4.1~6.0 and 35~55 MPa respectively. BNT/LCP composite is the potential substrate material for the high frequency application.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.446-451
• /
• 2002

지르코니아/알루미나 복합분말의 분무건조로 제조된 과립들의 형상과 성형시 과립 경계면 파괴에 분말의 분산 정도, 결합제의 종류, 그리고 고형분말 함량이 미치는 영향을 관찰하였다. 구형의 과립은 복합분말 슬러리가 완전 분산이 되지 않고 약간의 floc을 형성하고 결합제로서 Polyvinyl Pyrrolidone(PVP)을 사용했을 때 얻어졌다. PVP를 결합제로 사용하고 분말함량이 32.5 vol%인 슬러리로 분무건조한 분말은 성형시 과립경계면이 파괴되어 소결밀도는 99.7%이었고 굴곡강도는 850Mpa이었다.

• 대한환경공학회지
• /
• 제36권11호
• /
• pp.781-790
• /
• 2014

유속이 약한 하천이나 호소에 침강된 유기물, 영양염류, 유해화학물질 등의 오염물질은 일단 수중으로부터 제거되어 퇴적물 속에 축적되었다가 확산, 재 부유, 생물교란 등의 물리 화학 생물학적 과정에 의해 다시 수층으로 용출되어 수질 및 수생생태에 직 간접적인 악영향을 미칠 수 있게 된다. 특히 인은 수중생태계의 일차 생산량을 결정하는 중요한 물질중의 하나로 수체 내 물질순환 과정에서 주로 퇴적물에 저장되는 원소로 물리적인 교란 및 생 화학적 작용에 의해 수층으로용출되어 부영양화현상을 가속시키는 것으로 알려져 있다. 본 연구에서는 수층 미생물의 영향을 고려한 경우(호소수)와 미생물의 영향을 배제한(증류수)경우로 구분하여 각각 다른 capping 소재를 적용하여 퇴적물에서의 인 용출 저감 효과를 분석하였다. 실험 결과 화학적소재인 Fe-Gypsum, $SiO_2$-Gypsum로 capping을 할 경우, control보다 인 용출을 약 40% 이상 저감시키는 것을 확인할 수 있었다. 또한 복합소재인 granule gypsum+Sand는 약 50% 이상 용출을 저감 효과가 나타났다. 따라서 화학적 소재인 granule-gypsum과 그 위에 모래와 같은 친환경소재로 capping을 한다면 인 용출 저감에 효과적일 것으로 판단된다. Capping 처리 전후의 퇴적층내의 인 성상변화를 살펴본 결과, gypsum 투입에 의하여 호소 퇴적층에 존재하는 인이 용출되기 어려운 안정한 형태인 apatite-P 변화된 것으로 확인되었다. 이상의 결과를 토대로 capping 기술의 적용을 통하여 하천 및 호소 퇴적물에서 발생되는 인 용출에 대한 저감 효율을 기대할 수 있을 것으로 사료된다.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.403-407
• /
• 2011

Metal-insulator type, nano-granular soft magnetic films have been reviewed from the viewpoint of high frequency magnetic materials. The formation of nano-granular structure is related to the magnitude of heat of formation of intergranule materials. Variation of the ratio of granule phase to intergranule phase in the film is found to produce various characteristics in the magnetic properties of the film. The HRTEM observation reveals that neighboring granules in the film with above 60 at.% Co, contact at considerable points and the films show soft magnetic properties which are explainable in terms of the random anisotropy model for nano-crystalline materials. Addition of Ni group elements in Co-O based films enhances their anisotropy field up to 400 Oe and they exhibit excellent frequency response of permeability. Also, large electromagnetic noise suppression effect is demonstrated as one of their potential applications.

• 한국식품조리과학회지
• /
• 제15권5호
• /
• pp.500-506
• /
• 1999

완두 전분입자의 형태 및 완두 복합분의 반죽구조, 조리직후의 복합면의 내부구조를 SEM으로 조사한 결과는 다음과 같다. 완두전분은 타원형으로 그 크기가 불규칙적이고 다른 전분에 비해 크고 구부러지거나 들어간 모양이었다. 95$^{\circ}C$에서 가열하였을 때 완두전분은 부분적으로 중첩되었을 뿐 그 형태는 거의 유지하였다. P20과 C20의 반죽 구조는 밀가루 반죽에서의 큰 전분 입자들이 전체적으로 분포되어 있는 것에 비해 작은 전분입자들이 많아졌으며, P30은 다른 복합분 반죽의 구조보다 좀 더 많고 작은 전분입자들이 엉켜 있었다. 국수를 조리한 직후와 조리한 후 30분이 지난 뒤의 형태 변화를 관찰한 결과 P30과 P20의 조리된 직후의 형태는 각각 상이한 형태를 나타내었고 조리 30분후의 형태도 매우 다르게 나타났다. SEM으로 관찰된 P20과 C20의 구조는 밀가루 반죽과 큰 차이를 보이지 않아 제면시 영향을 주지 않을 것으로 보였으며 P30 역시 P20과 큰 차이를 나타내지 않아 제면적성으로는 문제가 없는 것으로 나타났다. Farinogram에 나타난 P20과 P30은 밀가루와 유사한 반죽시간과 중간정도의 안정도를 보이는 반면에 C20은 짧은 반죽시간과 낮은 안정도를 보였다. 대체로 C20이 P20, P30에 비해 도착시간과 반죽형성시간, 안정도가 짧게 나타났다. 또한 P20은 밀가루와 유사한 안정도와 반죽 저항도(MTI)를 나타냄으로서 제면적성에 적합함을 입증하였다.