• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.603-603
• /
• 2015

모든 외재적 형식의 가뭄을 모니터링하고 예측 및 평가하기 위해서는 가뭄지수가 필수적 요소로써 이용된다. 일반적으로 가뭄지수는 단일지수(single index), 다중지수(multiple index), 복합지수(composite index)로 분류되며 대부분 강수량, 유출량, 토양 수분량 등과 같은 하나의 변수만을 사용하는 단일지수이다. 가뭄지수는 가뭄평가에 있어서 각각의 장단점이 있다. 하나의 변수를 사용하는 가뭄지수는 계산이 간편하지만 가뭄의 물리적 특성을 정확하게 반영할 수 없기 때문에 신뢰할 수 있는 가뭄평가에 충분하지 않다. CDI(Composite Drought Index)는 PDSI(Palmer Drought Index), ADI(Aggregate Drought Index), SWSI(Surface Water Supply Index)와 같은 다중지수의 개념을 착안하여 고안되었으며, 모든 가뭄 형태(농업적 수문학적 기상학적)와 관련된 강우량, 유출량, 정규식생지수(NDVI)를 변수로써 사용하였다. NDVI는 MODIS(Moderate resolution imaging spectroradiometer)에서 제공하는 16일 간격의 위성자료를 이용하여 계산되었고 이와 시간 스케일을 맞추기 위해 나머지 두 변수 또한 16일 시계열을 사용하였다. CDI는 (1)각 변수들의 시계열을 행렬로 나타내고 (2)이것을 정규화하여 무차원 행렬로 변환한 후 (3)연구 지역의 최고습윤상태(most wet condition) 및 최고건조상태(most dry condition)의 차이값을 기반으로 하여 산정된다. 본 연구에서는 상대적으로 다른 유역에 비해 장기적이고 연속적인 자료를 확보할 수 있으며 농경지와 산림지역 비율이 높은 낙동강 유역을 대상유역으로 설정하였으며, 2001-2013년 기간의 자료를 이용하였다. 그 결과 연구 기간 중 실제 발생했던 가뭄을 반영하는 것을 확인하였다. 또한 CDI는 다양한 변수의 활용으로 가뭄의 물리적 특성의 반영이 가능하며 연구 지역의 기상 조건에 직접적으로 관련된 결과를 나타낸다. 자료의 가용성에 따라 적용범위가 제한적일 수 있으나 입력값으로 사용된 변수와 시계열을 편의와 효율에 따라 유연하게 적용할 수 있다. 따라서 CDI는 농업적, 수문학적, 기상학적 가뭄의 모든 관점을 통합하는 실용적 가뭄지수로써 사용될 수 있는 가능성을 포함하고 있다.

• Geomechanics and Engineering
• /
• v.29 no.4
• /
• pp.377-390
• /
• 2022

The stability of the roof rock-coal pillar-floor rock composite structure is of great significance to coal mine safety production. The cracks existing in the composite structure seriously affect the stability of the roof rock-coal pillar-floor rock composite structure. The numerical simulation tests of rock-coal-rock composite structures with different crack characteristics were carried out to reveal the composite structures' mechanical properties and failure mechanisms. The test results show that the rock-coal-rock composite structure's peak stress and elastic modulus are directly proportional to the crack angle and inversely proportional to the crack length. The smaller the crack angle, the more branch cracks produced near the main control crack in the rock-coal-rock composite structure, and the larger the angle between the main control crack and the crack. The smaller the crack length, the larger the width of the crack zone. The impact energy index of the rock-coal-rock composite structure decreases first and then increases with the increase of crack length and increases with the increase of crack angle. The functional relationships between the different crack characteristics, peak stress, and impact energy index are determined based on the sensitivity analysis. The determination of the functional relationship can fully grasp the influence of the crack angle and the crack length on the peak stress and impact energy index of the coal-rock composite structure. The research results can provide a theoretical basis and guidance for preventing the instability and failure of the coal pillar-roof composite structure.

• Composites Research
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2002

With the wide application of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joint have become a very important research area because they are often the weakest areas in composite structures. In this paper, the failure area index method to predict the strength of the mechanically fastened composite joint which has the same stacking sequence was suggested and evaluated. By the suggested failure area index method, the strength of the mechanically fastened composite joint could be predicted within 6.03％.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1337-1343
• /
• 2004

Shape optimization was performed to obtain a precise shape of cutouts including the internal shape of cutouts in a laminated composite plate by three dimensional modeling using solid element. Volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. It makes Tsai-Hill failure index at each element uniform in laminated composites under the predetermined volume a designer requires. Shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study; (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsai-Hill failure indices of the optimal shapes were remarkably reduced comparing with those of the initial shapes.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1093-1097
• /
• 2020

A composite iodine sorbent was obtained in the form of porous polymer matrix with activated carbon particles impregnated with triethylenediamine deposited on its surface. A comparative assessment of the radioactive methyliodide capturing efficiency by the composite sorbent and a sample of industrial charcoal sorbent was conducted. It was shown that under the selected testing conditions, the hydraulic resistance of the composite sorbent is lower, and the sorption capacity is higher than that of the industrial charcoal sorbent. A method for comparing the effectiveness of iodine sorbents, based on the calculation of the ratio of the sorption capacity index to the minimum capacity index, needed for the required purification degree was proposed.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.389-401
• /
• 2003

The purpose of this study is to develop an algorithm, which can be designed the optimal sections of the composite framed structures constituted with the beams and the columns consisted of H type of steel section and concrete considering the reliability index. The optimized problem or the composite framed structures is formulated with the objective function and the constraints taking the section sizes as the design variables. The objective functions are constituted by the total costs of constructions. Also, the constraints are derived by considering the reliability index of section stress and allowable stress. The algorithm optimized the section of the composite framed structures utilizes the SUMT method using the modified Newton-Raphson direction method. The optimizing algorithm developed in this study is applied to the numerical examples with respecting a one-bay, one-story composite framed structure and a one-bay five-story one for the practical utilization of design on the composite framed structures using the reliability indices$({\beta})$ three and zero. In addition, their numerical results are compared and analyzed to examine the possibility of optimization the applicability, and the convergence this algorithm.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.23-27
• /
• 2005

Yolk index (In, Haugh unit (BU) and weight loss of quail egg were measured to evaluate the effect of composite film (SPI/corn starch). Also, the effect of composite film was investigated to extend the shelf-life of sandwich foods. The quality characteristics of sandwich food was measured by the weight increment The weight reduction ratio for quail egg coated with composite film showed $8\%$ increment after 20 day storage. Yolk index and Haugh unit were significantly different between the uncoated and coated quail eggs with composite film solution. Sandwich coated with composite film showed the less weight increase for 12 hour storage compared to controls.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.316-325
• /
• 2001

The purpose of this study was to evaluate the effect of adhesive curing timing on the direction of polymerization shrinkage of light-curing composite resin. In this study, the curing times of adhesive and composite resin were measured by differential scanning calorimeter(DSC). 28 extracted human molars were embedded in clear resin and box-type cavities were prepared. Based on DSC data, the experimental teeth were divided into 4 groups. Group 1: no bond; Group 2: late curing; Group 3: Intermediate curing; Group 4: Early curing. After treating with adhesive, the buccal cavities were filled with Z-100 hybrid composite resin and the lingual ones were filled with AEliteflo flowable composite resin. The depressions at the surface were measured by surface profilometer, then the specimens were embedded in clear resin and sectioned. Impressions were obtained and used to get epoxy resin replicas. The epoxy replicas were gold-coated and observed under SEM. Average Maximum Gap(AMG), Gap Proportion(GP), Average Marginal Index(AMI) were used to compare the shrinkage gap of each group. The results were statistically analyzed using the Kruskal-Wallis One Way ANOVA, Student-Newman-Keuls method. The results of this study were as follows. 1. Average Maximum Gap, Gap Proportion, Average Marginal Index and depression at the surface or Z-100 hybride composite resin were smaller than those of AEliteflo flowable composite resin(P<0.05). 2. When the bonding between composite resin and tooth structure was strong, the shrinkage gap was small, and depression at the surface was deep(P<0.05). 3. In the well-bonded group, light-curing composite resin shrank toward bonded cavity wall, not toward light source. The result suggested that the direction of polymerization shrinkage was affected by the quality of bonding in the dentin-resin interface. The strong was the bonding between composite resin and tooth structure, the smaller was the gap and the deeper was the depression at the surface. Then the flow to compensate the polymerization shrinkage proceeded from surface to bonded cavity wall.

• Environmental and Resource Economics Review
• /
• v.12 no.3
• /
• pp.487-513
• /
• 2003

Currently, development of environmental index has been an increasingly important issue to achieve sustainable development, providing critical information to policy-makers. In particular, marine environmental composite index for Korea is widely required to establish. This paper constructs a marine environmental composite index using the OECD pressure-state-response (PSR) framework and employing multi-attribute utility theory (MAUT). The PSR framework links human activities as a pressure to environmental state and policy response. Weights are calculated by the MAUT technique. The paper provides annual pressure, state, response indices, and state index by sea area from 1991 to 2001 in Korea. The implications of the results and application plan of the index are also discussed.

• Human Ecology Research
• /
• v.59 no.1
• /
• pp.127-141
• /
• 2021

This study evaluates the financial status of Korean households using Household Financial Composite Index (HFCI) proposed in the preceding study. We analyzed 1,566 households with four persons aged 30-59 using raw data from the Korea Labor Panel Survey in 2016. The analysis results are as follows. First, HFCI was found to be 57.0 out of 100. Growth Index as one of three subindices was 11.1, which was significantly lower with 65.0 points for Status Index and 61.1 points for the Stability Index. Second, for households with male household owners, the overall financial score was 57.0, while that with female owners was almost similar with 57.2. HFCI was similar for the owner's age groups, but for Status Index, 58.5 for 30s, compared with 66.1 for 40s and 67.1 for 50s. The higher the education level of household owners, the better HFCI, with 53.2 high school graduates and 64.8 graduate graduates, showing a high gap of 11.6 points. HFCI for households living in owned housing was highest at 60.0, while that for rented housing was 40.7. Third, after controlling other effects, it was found that HFCI differed according to the level of education and ownership of housing living. Householder's gender was not found as a significant factor on HFCI. Status Index The 40s and 50s was higher than those in their 30s. Fourth, households were divided into three groups based on HFCI, named as risk, average and secure groups. HFCI for the risk group was 26.8, which was lower than 78.6 for the secure group, with a Status Index of 19.3. Households in their 50s and graduate school graduates were significantly included in the list of secure groups than others.