DOI QR코드

DOI QR Code

Experimental study on rock-coal-rock composite structure with different crack characteristics

  • Li, Tan (Institute of Mining and Coal, Inner Mongolia University of Science and Technology) ;
  • Chen, Guangbo (Institute of Mining and Coal, Inner Mongolia University of Science and Technology) ;
  • Li, Qinghai (College of Energy and Mining Engineering, Shandong University of Science and Technology)
  • 투고 : 2021.06.07
  • 심사 : 2022.03.29
  • 발행 : 2022.05.25

초록

The stability of the roof rock-coal pillar-floor rock composite structure is of great significance to coal mine safety production. The cracks existing in the composite structure seriously affect the stability of the roof rock-coal pillar-floor rock composite structure. The numerical simulation tests of rock-coal-rock composite structures with different crack characteristics were carried out to reveal the composite structures' mechanical properties and failure mechanisms. The test results show that the rock-coal-rock composite structure's peak stress and elastic modulus are directly proportional to the crack angle and inversely proportional to the crack length. The smaller the crack angle, the more branch cracks produced near the main control crack in the rock-coal-rock composite structure, and the larger the angle between the main control crack and the crack. The smaller the crack length, the larger the width of the crack zone. The impact energy index of the rock-coal-rock composite structure decreases first and then increases with the increase of crack length and increases with the increase of crack angle. The functional relationships between the different crack characteristics, peak stress, and impact energy index are determined based on the sensitivity analysis. The determination of the functional relationship can fully grasp the influence of the crack angle and the crack length on the peak stress and impact energy index of the coal-rock composite structure. The research results can provide a theoretical basis and guidance for preventing the instability and failure of the coal pillar-roof composite structure.

키워드

과제정보

This study was supported by the National Natural Science Foundation of China [grant numbers 51604164]; and the program of youth teacher growth plan in Shandong province.

참고문헌

  1. Antonio, B. and Haitao, Y. (2015), "Stress field near the tip of a crack in a poroelastic transversely anisotropic saturated rock", Eng. Fract. Mech., 1411-1418. https://doi.org/10.1016/j.engfracmech.2015.05.006
  2. Bai, J.B., Shen, W.L., Guo, G.L., Wang, X.Y. and Yu, Y. (2015), "Roof deformation, failure characteristics, and preventive techniq-ues of gob-side entry driving heading adjacent to the advancing working face", Rock Mech. Rock Eng., 48(6), 2447-2458. https://doi.org/10.1007/s00603-015-0713-2.
  3. Castillo, E., Conejo, A.J., Minguez, R. and Castillo, C. (2003), "An alternative approach for addressing the failure probability-safety factor method with sensitivity analysis", Reliab. Eng. Syst. Saf., 82(2), 207-216. https://doi.org/10.1016/S0951-8320(03)00164-9.
  4. Chen, S.J., Ge, Y., Yin, D.W. and Yang, H.S. (2019), "An experimental study of the uniaxial failure behaviour of rock-coal composite samples with pre-existing cracks in the coal", Adv. Civil Eng., 2019(12), 1-12. https://doi.org/10.1155/2019/8397598.
  5. Dehghan, M. and Mohammadi, V. (2016), "The numerical simulation of the phase field crystal (PFC) and modified phase field crystal (MPFC) models via global and local meshless methods", Comput. Method. Appl. Mech. Eng., 298, 453-484. https://doi.org/10.1016/j.cma.2015.09.018.
  6. Dou, L.M., Lu, C.P., Mu, Z.L., Zhang, X.T. and Li, Z.H. (2006), "Rock burst tendency of coal-rock combinations sample", J. Min. Saf. Eng., 23(1), 43-46.
  7. Filgueira, U.C., Alejano, L.R., Arzua, J. and Ivars, D.M. (2017), "Sensitivity analysis of the micro-parameters used in a PFC analysis towards the mechanical properties of rocks", Procedia Eng., 191, 488-495. https://doi.org/10.1016/j.proeng.2017.05.208.
  8. Filgueira, U.C., Alejano, L.R., Arzua, J. and Ivars, D.M. (2017), "Sensitivity analysis of the micro-parameters used in a PFC analysis towards the mechanical properties of rocks", Procedia Eng., 191, 488-495. https://doi.org/10.1016/j.proeng.2017.05.208.
  9. Frith, R. and Reed, G. (2018), "Coal pillar design when considered a reinforcement problem rather than a suspension problem", Int. J. Min. Sci. Technol., 28(1), 11-19. https://doi.org/10.1016/j.ijmst.2017.11.013.
  10. Griffith, W.A., Becker, J., Cione, K., Miller, T. and Pan, E. (2014), "3D topographic stress perturbations and implications for ground control in underground coal mines", Int. J. Rock Mech. Min. Sci., 70, 59-68. https://doi.org/10.1016/j.ijrmms.2014.03.013.
  11. Hadjigeorgiou, J., Esmaieli, K. and Grenon, M. (2008), "Stability analysis of vertical excavations in hard rock by integrating a fracture system into a PFC model", Tunnelling and Underground Space Technology incorporating Trenchless Technology Research, 24(3), 296-308. https://doi.org/10.1016/j.tust.2008.10.002.
  12. Halim, M.A., Majumder, R.K., Zaman, M.N. and Hossain, S. (2013), "Mobility and impact of trace metals in barapukuria coal mining area, northwest Bangladesh", Arabian J. Geosci., 6(12), 4593-4605. https://doi.org/10.1007/s12517-012-0769-1.
  13. Hu, Z.Q., Ma, B., Chen, X.Z. and Tangchirapat, W.C. (2021), "Study on sensitivity parameters analysis of grouting reinforcement underpassing existing subway tunnel by numerical modeling", Adv. Civil Eng., 2021. https://doi.org/10.1155/2021/8868216.
  14. Jiang, Y.D., Wang, T., Song, Y.M., Wang, X. and Zhang, W. (2013), "Experimental study on the stick-slip process of coal-rock composite samples", J. China Coal Soc., 38(2), 177-182. https://doi.org/10.13225/j.cnki.jccs.2013.02.013.
  15. Kamran, P., Aliakbar, G. and Takato, T. (2015), "Rock failure assessment based on crack density and anisotropy index variations during triaxial loading tests", Geomech. Eng., 9(6), 793-813. https://doi.org/10.12989/gae.2015.9.6.793.
  16. Kopacz, M., Kryzia, D. and Kryzia, K. (2017), "Assessment of sustainable development of hard coal mining industry in poland with use of bootstrap sampling and copula-based monte carlo simulation", J. Cleaner Production, 159(15), 359-373. https://doi.org/10.1016/j.jclepro.2017.05.038.
  17. Kurlenya, M.V. and Mirenkov, V.E. (2018), "Deformation of ponderable rock mass in the vicinity of a finite straight-line crack", J. Min. Sci., 54(6), 893-898. https://doi.org/10.1134/S1062739118065035.
  18. Li, B.F., Liang, X.H. and Qi, L.W. (2011), "Research on the influence of coal's uniaxial compressive strength to impact energy index", Procedia Eng., 26, 863-868. https://doi.org/10.1016/j.proeng.2011.11.2248.
  19. Li, D.Y., Sun, Z. and Xie, T. (2017), "Energy evolution characteristics of hard rock during triaxial failure with different loading and unloading paths", Eng. Geol., 228, 270-281. https://doi.org/10.1016/j.enggeo.2017.08.006.
  20. Li, X.S., Liu, Z.F. and Yang, S. (2021), "Similar physical modeling of roof stress and subsidence in room and pillar mining of a gently inclined medium-thick phosphate rock", Adv. Civil Eng., 2021, 17. https://doi.org/10.1155/2021/6686981.
  21. Li, X.S., Yang, S. and Wang, Y.M. (2021), "Macro-micro response characteristics of surrounding rock and overlying strata towards the transition from open-pit to underground mining", Geofluids, 2021, 18. https://doi.org/10.1155/2021/5582218.
  22. Lisjak, A. and Grasselli, G. (2014), "A review of discrete modeling techniques for fracturing processes in discontinuous rock mass", J. Rock Mech. Geotech. Eng., 6, 301-314. https://doi.org/10.1016/j.jrmge.2013.12.007.
  23. Liu, W.R., Wang, X. and Li, C.M. (2019), "Numerical Study of Damage Evolution Law of Coal Mine Roadway by Particle Flow Code (PFC) Model", Geotech. Geol. Eng., 37(4), 2883-2891. https://doi.org/10.1007/s10706-019-00803-6.
  24. Ma, Q., Tan, Y.L., Liu, X.S., Gu, Q.H. and Li, X.B. (2020), "Effect of coal thicknesses on energy evolution characteristics of roof rock-coal-floor rock sandwich composite structure and its damage constitutive model", Compos. Part B Eng., 198(1), 108086. https://doi.org/10.1016/j.compositesb.2020.108086.
  25. Patil, M.S., Seo, J.H., Panchal, S. and Lee, M.Y. (2020), "Numerical study on sensitivity analysis of factors influencing liquid cooling with double cold-plate for lithium-ion pouch cell", Int. J. Energ. Res., 45(2), 2533-2559. https://doi.org/10.1002/ER.5946.
  26. Saltelli, A., Annoni, P., Azzini, I., Campolongo, F. and Tarantola, S. (2010), "Variance based sensitivity analysis of model output. design and estimator for the total sensitivity index", Comput. Phys. Commun., 181(2), 259-270. https://doi.org/10.1016/j.cpc.2009.09.018.
  27. Sivakumar, G. and Maji, V. B. (2018), "A study on crack initiation and propagation in rock with pre-existing flaw under uniaxial compression", Indian Geotech. J., 48(4), 626-639. https://doi.org/10.1007/s40098-018-0304-8.
  28. Sun, Z., Li, L., Wang, F. and Zhou, G. (2019), "Desorption characterization of soft and hard coal and its influence on outburst prediction index", Energy Sources Part A Recovery Utilization and Environmental Effects, (2), 1-15. https://doi.org/10.1080/15567036.2019.1618991.
  29. Thin, I.G.T., Pine, R.J. and Trueman, R. (1993), "Numerical modelling as an aid to the determination of the stress distribution in the goaf due to longwall coal mining", Int. J. Rock Mech. Min. Sci., 30(7), 1403-1409. https://doi.org/10.1016/0148-9062(93)90128-Z.
  30. Wang, C., Lu, Y., Shen, B., Li, Y. and Liang, Y. (2019), "Design and monitoring of CPB replacement mining RSCP: a case study in China, Energy Sources, Part A: Recovery", Utilization and Environmental Effects, 80-95. https://doi.org/10.1080/15567036.2019.1623944.
  31. Wang, X.Y., Bai, J.B., Wang, R.F. and Sheng, W.L. (2015), "Bearing characteristics of coal pillars based on modified limit equilibrium theory", Int. J. Min. Sci. Technol., 25(6), 943-947. https://doi.org/10.1016/j.ijmst.2015.09.010.
  32. Wu, G.S., Yu, W.J., Zuo, J.P. and Du, S.H. (2020), "Experimental and theoretical investigation on mechanisms performance of the rock-coal-bolt(rcb) composite system", Int. J. Min. Sci. Technol., 30(6), 18-27. https://doi.org/10.1016/j.ijmst.2020.08.002.
  33. Wu, H., Zhang, N., Wang, W.J., Zhao, Y.M. and Cao, P. (2015), "Characteristics of deformation and stress distribution of small coal pillars under leading abutment pressure", Int. J. Min. Sci. Technol., 25(6), 921-926. https://doi.org/10.1016/j.ijmst.2015.09.007.
  34. Xie, X.Z., Fan, Z.Z., Huang, Z.Z. and Xu, G. (2011), "Research on unsymmetrical loading effect induced by the secondary mining in the coal pillar", Procedia Eng., 26(26), 725-730. https://doi.org/10.1016/j.proeng.2011.11.2229.
  35. Yang, J.X., Liu, C.Y., Yu, B. and Wu, F.F. (2015), "The effect of a multi-gob, pier-type roof structure on coal pillar load-bearing capacity and stress distribution", Br. J. Nutr., 74(4), 1267-1273. https://doi.org/10.1007/s10064-014-0685-6.
  36. Yu, L., Wang, S.W., Lu, Q. and Feng, G.H. (2016), "Sensitivity analysis of existing residential building energy consumption influencing factors in cold regions", Procedia Eng., 146, 196-203. https://doi.org/10.1016/j.proeng.2016.06.372.
  37. Zha, W.H., Shi, H., Liu, S. and Kang, C.H. (2017), "Surrounding rock control of gob-side entry driving with narrow coal pillar and roadway side sealing technology in Yangliu Coal Mine", Int. J. Min. Sci. Technol., 27(5), 819-823. https://doi.org/10.1016/j.ijmst.2017.07.023
  38. Zhang, F., Wang, P., Chen, Z.J. and Xi, A.L. (2014), "Mixture distribution of coal seam thickness and its significance in Zhongji exploration zone of Yulin-Shenmu mining district in northern Shaanxi", J. Geology, 2014.
  39. Zhao, Y.X., Jiang, Y.D. and Tian, S.P. (2010), "Investigation on the characteristics of energy dissipation in the preparation process of coal bumps", J. China Coal Soc., 35(12), 1979-1983. https://doi.org/10.1016/S1876-3804(11)60004-9.
  40. Zhou, S., Zhu, H.H., Ju, J.W., Yan, Z.G. and Chen, Q. (2017), "Modeling microcapsule-enabled self-healing cementitious composite materials using discrete element method", Int. J. Damage Mech., 26(2), 340-357. https://doi.org/10.1177/1056789516688835.
  41. Zuo, J.P., Xie, H.P., Wu, A.M. and Liu, J.F. (2011), "Investigation on failure mechanisms and mechanical behaviors of deep coal-rock single body and combined body", Chinese J. Rock Mech. Eng., 30(1), 84-92. https://doi.org/10.3724/SP.J.1077.2011.00271.