• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.189-192
• /
• 2001

Resin transfer molding process has been widely used in the automobile industry, because the product with large area can be manufactured easily and the cost for the manufacturing is lower than that of compression molding and hand lay up method. Since RTM process is suitable for large bus housing panels, in this work, the composite housing panel was manufactured by RTM process and the mechanical properties, surface quality and the condition of manufacturing process were studied.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1209-1216
• /
• 2010

This paper dealt with an alternative for maximizing mass savings in spacecraft design by replacing conventional aluminum alloy housing used for various spacecraft avionics by composite materials. Key requirements were defined for the purpose of composite housing design with sufficient durability and various functionalities as well as more lightweight characteristics as compared with aluminum alloy widely-used for conventional electronics housing. Conceptual design was also carried out for manufacturing modular, lightweight composite electronic housing equipped with high thermal and electrical conductivities, EMI protection, and radiation shielding characteristics as well as excellent structural performance; feasibility of enhancing mass savings in spacecraft design was presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.975-986
• /
• 2013

This paper dealt with the fabrication and performance evaluation of the electronics housing made of lightweight composite materials, aiming at the enhancement of satellite mass savings by replacing conventional aluminum alloy widely used for satellite avionics with lightweight composite material. For this purpose, a fabrication process was designed to overcome low machinability of CFRP and to minimize the post-treatment. The composite housing with grid-stiffened and monolithic frame was made using co-curing method. Its performance was also evaluated regarding endurance, stiffness, thermal conductivity, electrical grounding, EMI protection and radiation shielding. The composite housing can provide the considerable mass savings over the aluminum housing with same dimension.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.47-57
• /
• 2015

Purpose: The purpose of this study is to set the type of 'the New-hanok type Public Buildings' through a case study for the hanok public buildings completed after 2000 years, and to analyze planned properties of the type. This is significant Establishing legal status of 'the New-hanok type Public Buildings' and seeing review of application possibilities of the type for providing a systematic government support measures of 'the New-hanok type public buildings' when models developing future. Method: Method of research is the first to examine the current laws and established the definition and legal status of 'the New-hanok type Public Buildings'. Followed by Setting the type classification criteria as to classify the type of 'the New-hanok type public buildings' and research architectural overview of selected cases by Literature, Internet searches, etc. After systematizing of the types classification of analysis cases, Characteristics of the type of the building structure looks catch classify in spatial structure, function, beauty. Finally, review application possibilities of the type for systematic government support measures establish when models developing of 'the New-hanok type Public Buildings' through a comprehensive analysis. Result: Selected cases were categorized as 3 types according by structural standard based on the core concept of 'the New-hanok type Public Buildings' set in this study. This can be divided into 'Wooden Structure type' and 'Composite structure - Convergence type' and 'Composite structure - juxtaposed type', 'Wooden Structure type' was re-classified by divided into '(1)Traditional Korean Wooden Structure' and '(2)Laminated Wood Wooden Structure'.

• Journal of the Korean housing association
• /
• v.23 no.3
• /
• pp.71-78
• /
• 2012

This study analyzed metaphorical characteristics of composite materials in terms of a visual aspect on a new material that is applicable for housing space. The results are as follows. First, the recent trend of housing space tends to stimulate emotions of residents through visual finishing materials, and for this reason, visual expression of a new material that is applicable to finishing materials plays an important role. Second, convertibleness, association and duplicity were selected as items of metaphorical expressions through the precedent studies. Third, most of combinations of materials were shown different from the existing materials in an expressive characteristic of composite materials through analysis, and application of a technology showed a different visual effect of patterns and textures from the existing materials. This implies that visual expression and directing are being attempted using such technology on finishing materials of housing space with development of digital technologies. Fourth, for metaphorical characteristics of composite material for housing space, combination of various materials and a digital technology were applied on convertibleness. For association, a combination of materials that have each different characteristic associated with the third material, and combination with subsidiary material of optical fiber and a digital technology were appled for duplicity. Data obtained from the results of this study has high efficiency in planning finishing materials for emotional housing space in future, and it will be basic data for a study on development of new finishing materials.

• Journal of the Korean Home Economics Association
• /
• v.26 no.2
• /
• pp.49-67
• /
• 1988

The purpose of this study was to present a conceptual model for predicting housing quality. Housing quality was measured in three ways: perceived quality about physical features of houses, perceived level of the quality in comparison with perceived average level I urban area and housing satisfaction. The specific objectives to achieve the purpose were ; 1) to measure the perceived quality about physical features of houses and perceived level of the quality in comparison with the perceived average level I urban 2) to measure the level of housing satisfaction 3) to clarify the causality between the composite variables of housing quality. A final instrument was developed through two stage pilot surveys. The respondents were 1292 homemakers of middle and high economic class in seoul and Daejeon, selected through stratified random sampling technique. Data were collected during March and April, 1986, and analyzed using SPSS and SAS computer packages. The statistics used were frequency, percentage, F-test, Duncan's Multiple Range, x2, Cramer's V, Multiple linear Regression, Path analysis. The major finding were as follows; the variables significantly related to predict the housing quality were found. The simple, composite variables and 3 measures of housing quality were linked using path analysis, thereby a conceptual model predicting housing quality was suggested.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1109-1112
• /
• 2004

This study reports on the pressure relief design and braided composite of surge arrester. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. As a solution, this study describes pressure relief design performance of arresters with braided composite module. In general, braided composite has Potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was decided. And Polymer arrester module was manufactured with braid. The mechanisms of pressure occurrence and relief were investigated basically by analyzing arc energy and the correlation between thermal shock and indoor pressure in pressure relief test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.609-616
• /
• 2019

This paper proposes a design plan of short-term temporary housing for the victims by disaster. Also construction workability and residential environment evaluated by mock-up. In particular, in the event of a disaster, victims have lived the auditorium or gymnasium of the nearby school which is an emergency shelter. However, there was a problem of livability. Therefore, it is the purpose of study to provide temporary housing that resides within 30 days. For this purpose, a composite panel with light weight and insulation select to produce mock-up. The mock-up complete in about an hour. This is because it is made only of the composite panels. The composite panels confirm to be easy to load and construct. And mock-up evaluates insulation and waterproofing performance in the laboratory. As a result, Mock-up has insulation and waterproofing performance. This suggests an alternative to short -term temporary housing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.149-158
• /
• 2008

This article provides strength estimation of T-joint area which made of composite material. Inner and outer structures of medium range surveillance radar are all made of sandwich structure which is made with composite material(CFRP) and aluminum honeycomb core. Since the radar is voluminous and has very complex inner structure, the whole structure cannot be made as one piece. Therefore, usage of T-joints is inevitable. Since some of stress concentration areas were located around T-joint area, series of strength estimations were conducted. Three different configurations were tested to improve mechanical properties(primarily on strength). The results show an improvement on strength to meet calculated strength on stress concentrated T-joint area.

• Journal of Distribution Science
• /
• v.17 no.1
• /
• pp.11-19
• /
• 2019

Purpose - We document the impact of economic policy uncertainty (EPU) in the US and China on the dynamic spillover effect of macroeconomics such as stock price, housing price in Korea. Research design, data, and methodology - We use the nine variables to analyze the effect which produces a result among the EPU indexes of the US and China on economic variables which is the consumer price index (CPI), housing purchase price composite index, housing lease price, the stock price index in banking industry, construction industry and distribution industry, and composite leading indicator from January 1995 to December 2016 with the Vector Error Correction Model. Result - The US EPU index has significantly a negative relation on the CPI, housing purchase price index, housing lease price index, the stock price index in banking industry, construction industry, and distribution industry in Korea. Conclusions - We find the dynamic effect of the EPU indexes in the US and China on the macroeconomics returns in Korea. This study has an empirical evidence that the economy market in Korea is influenced by the EPU index of the US rather than it of China. The higher EPU, the more risky the economy of in Korea.