• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.91-102
• /
• 2023

To study the evaluation standard and control limit of mortar filling layer void length, in this paper, the train sub-model was developed by MATLAB and the track-bridge sub-model considering the mortar filling layer void was established by ANSYS. The two sub-models were assembled into a train-track-bridge coupling dynamic model through the wheel-rail contact relationship, and the validity was corroborated by the coupling dynamic model with the literature model. Considering the randomness of fastening stiffness, mortar elastic modulus, length of mortar filling layer void, and pier settlement, the test points were designed by the Box-Behnken method based on Design-Expert software. The coupled dynamic model was calculated, and the support vector regression (SVR) nonlinear mapping model of the wheel-rail system was established. The learning, prediction, and verification were carried out. Finally, the reliable probability of the amplification coefficient distribution of the response index of the train and structure in different ranges was obtained based on the SVR nonlinear mapping model and Latin hypercube sampling method. The limit of the length of the mortar filling layer void was, thus, obtained. The results show that the SVR nonlinear mapping model developed in this paper has a high fitting accuracy of 0.993, and the computational efficiency is significantly improved by 99.86%. It can be used to calculate the dynamic response of the wheel-rail system. The length of the mortar filling layer void significantly affects the wheel-rail vertical force, wheel weight load reduction ratio, rail vertical displacement, and track plate vertical displacement. The dynamic response of the track structure has a more significant effect on the limit value of the length of the mortar filling layer void than the dynamic response of the vehicle, and the rail vertical displacement is the most obvious. At 250 km/h - 350 km/h train running speed, the limit values of grade I, II, and III of the lengths of the mortar filling layer void are 3.932 m, 4.337 m, and 4.766 m, respectively. The results can provide some reference for the long-term service performance reliability of the ballastless track-bridge system of HRS.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.779-788
• /
• 2019

컴팩션 그라우팅 공법, 일명 CGS (Compaction Grouting System) 공법은 저유동성 그라우트재의 주입을 통해 주변 지반을 압밀·다짐하여 원지반의 물성 향상은 물론 지중 그라우트 구근체의 형성을 통해 복합지반 거동을 기대함으로써 지반을 개량하는 공법이다. 그러나 기존 컴팩션 그라우팅 공법에 사용되는 펌프는 한 번에 여러 공을 동시에 주입하기 어려워 시공 물량이 많아 신속함이 요구되는 공사 시에 시공 효율성 확보가 어려웠다. 따라서 본 논문에서는 3공까지 동시주입이 가능한 다중 동시주입 컴팩션 그라우팅 공법을 개발하여 현장시험을 통해 지반 보강효과의 적용성을 평가하였다. 현장시험은 점성토 연약지반에 단일공과 3공 삼각 배열로 각각 시험시공하고 그라우팅 주입 전·후 표준관입시험(SPT)을 수행하여 그 결과를 비교·분석하였다. 최종적으로 점성토 연약지반에서 다중 동시주입 컴팩션 그라우팅 공법의 적용 시, 요구되는 적정 동시주입 이격거리와 충분한 지반 안정화 시간 확보의 중요성에 대해 제언하였다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.683-692
• /
• 2020

본 논문에서는 철도교량상판에 적용하는 방수재료 선정을 위한 이음부 및 균열부에 대한 거동 저항 성능평가를 수행하였다. PSC거더 철도 교량상판에서 발생하는 일반적인 변위 범위 조건을 도출하여, 도출한 결과에 따라서 방수재료의 균열 거동 저항 성능평가 방법을 개발하였다. 재안하고자 하는 평가를 위한 균열거동폭 (mm)을 설정하기 위해 레일도상이 설치되어있는 PSC 거더 교량을 대상으로 유한요소 모델링 해석을 수행하였으며, 최소 균열 거동 범위 (약 1.5mm)를 도출하였다. 평가 방법으로서는 교량 상판에 통상적으로 사용되는 시멘트계 도막 시스템, 폴리우레탄 코팅, 접착식 아스팔트 시트 및 합성 고무 겔 복합 아스팔트 시트 시스템 총 4가지 종류의 방수재료를 선정하여, 각 방수재료 종류별 5가지의 시편을 제조하여 성능 평가를 수행하였다. 각 시험편별로 4가지의 균열 거동폭조건 (1.5, 3.0, 4.5, 6.0mm)에 대해 평가를 수행하였으며, 본 연구를 통하여 철도교량에 일반적인 균열 거동 폭을 고려한 평가 기준에 따라 각 방수재료별 누수저항성 평가에 따른 철도교량상판 사용 적합성을 판단하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권4호
• /
• pp.30-38
• /
• 2017

최근 거푸집 작업과 철근 배근 공정을 생략하여 공정의 단순화를 통한 공기단축 합성 슬래브 시스템의 개발 연구가 진행 중이다. 이 연구에서는 구조용 데크플레이트를 활용하여 거푸집 및 인장철근의 배근을 대체하고 강섬유보강 콘크리트를 사용하여 온도철근의 역할을 대체하는 단순슬래브 시스템의 장기거동을 평가하는 것이 목적이다. 구조용 데크플레이트를 활용하는 기존 합성슬래브 공법은 건조수축에 의한 균열 제어를 위해 용접 철망을 배근하는 것이 일반적이나, 이는 균열을 억제하는 데 효과적이지 못한 것으로 선행연구들에서 지적되었다. 본 연구에서는, 일반적인 건축물의 하중 조건으로 제작 된 연속 두 경간을 갖는 강섬유보강 데크플레이트 슬래브의 장기적인 균열 및 처짐 거동을 평가하도록 하였다. 실험 결과, 실험체의 비 내력부에서는 장기균열의 개수 및 폭이 현저하게 감소하는 것으로 나타나 강섬유보강 콘크리트의 건조수축과 균열 제어 성능이 우수한 것으로 평가되었으며, 처짐량도 강섬유보강 데크플레이트 슬래브가 우수한 것을 확인하였다. 다만, 부모멘트가 작용되는 슬래브 연속단부에서는 사용하중 단계에서 균열폭을 제어하고 하중 제거 시 처짐을 회복하기 위한 디테일의 적용이 필요한 것으로 분석되었다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• Steel and Composite Structures
• /
• 제37권3호
• /
• pp.273-289
• /
• 2020

Due to the unique construction method of modular steel buildings (MSBs) with units prefabricated fully off the site and assembled quickly on the site, the inter-module connection for easy operation and overall performance of the system were key issues. However, it was a lack of relevant research on the system-level performance of MSBs. This study investigated the seismic performance of two-storey modular steel structure with a proposed vertical rotary inter-module connection. Three full-scale quasi-static tests, with and without corrugated steel plate and its combination, were carried out to evaluate and compare their seismic behaviour. The hysteretic performance, skeleton curves, ductile performance, stiffness degradation, energy dissipation capacity, and deformation pattern were clarified. The results showed that good ductility and plastic deformation ability of such modular steel structures. Two lateral-force resistance mechanisms with different layout combinations were also discussed in detail. The corrugated steel plate could significantly improve the lateral stiffness and bearing capacity of the modular steel structure. The cooperative working mechanism of modules and inter-module connections was further analyzed. When the lateral stiffness of upper and lower modular structures was close, limited bending moment transfer may be considered for the inter-module connection. While a large lateral stiffness difference existed initially between the upper and lower structures, an obvious gap occurred at the inter-module connection, and this gap may significantly influence the bending moments transferred by the inter-module connections. Meanwhile, several design recommendations of inter-module connections were also given for the application of MSBs.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.439-447
• /
• 2018

The structural behaviors of cylindrical barns as a specific engineering structure have been considered as a complicated computing process. The structure design against the earthquake load, to protect by using the code, is an urgency avoiding unexpected damages. The situation has been subjected to the applied design method if there would be no failure across the construction procedures. The purpose of the current study is to clarify the behaviors of cylindrical reinforced concrete barns through the analytic methods across the mass and Lagrangian approaches through the whole outcomes comparison indicating that the isoparametric element obtained from the Lagrangian approach has been successfully applied in the barns earthquake analysis when the slosh effects have been discarded. The form of stress distributions is equal with $s_z$ closed distributions to one another.

• 한국화재소방학회논문지
• /
• 제22권4호
• /
• pp.85-94
• /
• 2008

본 연구는 HSC의 폭렬제어 및 내화성능 확보 방안 중 하나인, HSC에 내화성능을 갖는 피복층을 형성하는 방안에 대하여, 피복층을 ECC로 이용하는 경우 이에 대한 화재성상 및 내화특성을 실험적으로 검토하고, 수열온도 예측 등과 같은 내화설계를 위한 기초자료를 제시하기 위한 것이다. 이를 위하여 HSC 부재에 대한 내화시험을 실시하였다. 실험변수는 ECC의 피복층 두께(20, 30, 40 mm), 시공방식(라이닝, 보수)으로 하였으며, 비교 및 검증을 위하여 피복층이 없는 HSC 및 FRCC 2종류의 충전두께의 변화에 따른 실험을 실시하였다. 도입 화재하중은 ISO 834 기준 3시간 가열곡선으로 하였으며, 각 깊이별 수열온도, 폭렬 및 균열성상, 중성화깊이를 측정 평가하였다. 실험결과 ECC는 HSC 보다 높은 차열성능을 가지고 있으며, 폭렬저감성능을 확인 할 수 있었다. 또한 회귀분석을 통하여 ECC를 HSC의 피복층으로 사용하는 경우에 대한 수열온도 간편 예측식을 제시하였으며, 이에 대한 검증을 실험결과를 통해 수행하였고 HSC를 이용한 부재에 대한 본 예측식의 적용 방법을 제시하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.7-12
• /
• 2007

본 연구에서는 선행연구에 의해 설계되어진 20인승급 소형 위그선의 주날개 구조를 엔진 및 프로펠러에 의해 유발되는 진동을 가진력으로 하여 강제진동 해석을 수행하였다. 대상 위그선은 왕복엔 진을 날개에 장착하여 프로펠러에 의한 추력으로 비행하며， 미는 형식(Pusher Type)의 엔진 배열을 취하고 있다. 유한요소해석을 위해서 구조해석 상용프로그랩인 MSC/NASTRAN을 사용하였으며， 엔진의 주요 진동 특성인 X-mode 와 Y-mode 그리고 Z-mode를 특정 가진 주파수로 하여 주파수 응답 해석을 수행하였고, 엔진의 추력방향 진동 모드인 X-mode를 프로펠러의 회전에 의해 진동을 수반하는 가진 추력으로 가정하여 과도응답 해석을 수행한 후 날개의 진동 특성을 살펴보았다.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.687-702
• /
• 2016

There are many studies in the literature conducted on the subject of ensuring earthquake safety of reinforced concrete and steel structures using steel braced frames, but no detailed study concerning individual behavior of steel braced frames under earthquake loads and strengthening of reinforced concrete structures with out-of-plane steel braced frames has been encountered. In this study, in order to evaluate behaviors of "Concentrically Steel Braced Frames" types defined in TEC-2007 under lateral loads, dimensional analysis of Concentrically Steel Braced Frames designed with different scales and dimensions was conducted, the results were controlled according to TEC-2007, and after conducting static pushover analysis, behavior and load capacity of the Concentrically Steel Braced Frames and hinges sequence of the elements constituting the Concentrically Steel Braced Frames were tested. Concentrically Steel Braced Frames that were tested analytically consist of 2 storey and one bay, and are formed as two groups with the scales 1/2 and 1/3. In the study, Concentrically Steel Braced Frames described in TEC-2007 were designed, which are 7 types in total being non-braced, X-braced, V- braced, $\wedge$- braced, $\backslash$- braced, /- braced and K- braced. Furthermore, in order to verify accuracy of the analytic studies performed, the 1/2 scaled concentrically steel X-braced frame test element made up of box profiles and 1/3 scaled reinforced concrete frame with insufficient earthquake resistance were tested individually under lateral loads, and test results were compared with the results derived from analytic studies and interpreted. Similar results were obtained from both experimental studies and pushover analyses. According to pushover analysis results, load-carrying capacity of 1/3 scaled reinforced concrete frames increased up to 7,01 times as compared to the non-braced specimen upon strengthening. Results acquired from the study revealed that reinforced concrete buildings which have inadequate seismic capacity can be strengthened quickly, easily and economically by this method without evacuating them.