• ETRI Journal
• /
• v.35 no.4
• /
• pp.571-577
• /
• 2013

The fabrication of a thin-film transistor backplane and a liquid-crystal display using printing processes can eliminate the need for photolithography and offers the potential to reduce the manufacturing costs. In this study, we prepare contact via structures through a poly(methyl methacrylate) polymer insulator layer using inkjet printing. When droplets of silver ink composed of a polymer solvent are placed onto the polymer insulator and annealed at high temperatures, the silver ink penetrates the interior of the polymer and generates conducting paths between the top and bottom metal lines through the partial dissolution and swelling of the polymer. The electrical property of various contact via-hole interconnections is investigated using a semiconductor characterization system.

• Steel and Composite Structures
• /
• v.52 no.1
• /
• pp.57-76
• /
• 2024

The management of waste tire rubber has become a pressing environmental and health issue, requiring sustainable solutions to mitigate fire hazards and conserve natural resources. The performance of waste materials in structural components needs to be investigated to fabricate sustainable structures. This study aims to investigate the behavior of glass fiber reinforced polymer (GFRP) reinforced rubberized concrete (GRRC) compressive components under compressive loads. Nine GRRC circular compressive components, varying in longitudinal and transverse reinforcement ratios, were constructed. A 3D nonlinear finite element model (FEM) was proposed by means of the ABAQUS software to simulate the behavior of the GRRC compressive components. A comprehensive parametric analysis was conducted to assess the impact of different parameters on the performance of GRRC compressive components. The experimental findings demonstrated that reducing the spacing of GFRP stirrups enhanced the ductility of GRRC compressive components, while the addition of rubberized concrete further improved their ductility. Failure in GRRC compressive components occurred in a compressive columnar manner, characterized by vertical cracks and increased deformability. The finite element simulations closely matched the experimental results. The proposed empirical model, based on 600 test samples and considering the lateral confinement effect of FRP stirrups, demonstrated higher accuracy (R² = 0.835, MSE = 171.296, MAE = 203.549, RMSE = 195.438) than previous models.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.112-119
• /
• 2006

We investigated the changes in the volatile flavor components of domesticated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 15 and 30 days at refrigerated ($2{\sim}4^{\circ}C$) or room ($18{\sim}20^{\circ}C$) temperature (hereafter referred to as WP-RE-15, WP-RO-15, LDPE-RE-15, LDPE-RO-15, WP-RE-30, WP-RO-30, LDPE-RE-30 and LDPE-RO-30). 167 volatile flavor components were identified in the fresh domesticated Codonopsis lanceolata by GC/MS. The volatile flavor components which were identified in the domesticated Codonopsis lanceolata stored for 15 days were as follows ; LDPE-RE (117 components), WP-RO (65 components), WP-RE (49 components), and LDPE-RO (48 components). After 30 days, the numbers of components were as follows : LDPE-RE (99 components), WP-RO (94 components), WP-RE (46 components), and LDPE-RO (85 components). In all conditions, the following 7 volatile flavor components were identified; 1-hexadecene, 2,6-dimethyl-2-octanol, 2-methyl-2-dodecanol, ${\alpha}$-cedrene, ${\beta}-selinene$, farnesane, and isoledene. According to the sensory evaluation, the freshness of domesticated Codonopsis lanceolata was best maintained with LDPE film and under chilled conditions.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.847-855
• /
• 2014

We developed a highly refractive index planarization layer showing a very smooth surface for organic light-emitting diode (OLED) light extraction, and we successfully prepared a highly efficient white OLED device with an embossed nano-structure and highly refractive index planarization layers. White OLEDs act as an internal out-coupling layer. We used a spin-coating method and two types of $TiO_2$ solutions for a planarization of the embossed nano-structure on a glass substrate. The first $TiO_2$ solution was $TiO_2$ sol, which consists of $TiO_2$ colloidal particles in an acidic aqueous solution and several organic additives. The second solution was an organic and inorganic hybrid solution of $TiO_2$. The surface roughness ($R_a$) and refractive index of the $TiO_2$ planarization films on a flat glass were 0.4 nm and 2.0 at 550 nm, respectively. The J-V characteristics of the OLED including the embossed nano-structure and the $TiO_2$ planarization film were almost the same as those of an OLED with a flat glass, and the luminous efficacy of the aforementioned OLED was enhanced by 34% compared to that of an OLED with a flat glass.

• Korean Journal of Human Ecology
• /
• v.5 no.1
• /
• pp.94-106
• /
• 2002

The present study investigated free sugar, organic acid, volatile components in fresh leaf and root of the coriander respectively, and in blanched leaf and root of the coriander, respectively. The research results are as follows : Glucose, fructose and sucrose were detected in leaf and root of the coriander. The content of total free sugar was 22.91mg% in leaf and 23.84mg% in root. By blanching, the contents of total free sugar decreased to 21.28mg% and 21.89mg% in leaf and root respectively. Malic acid, trataric acid were detected in leaf and root of the coriander. The content of total organic acid in leaf was higher than that in root of the coriander. By blanching, the content of total organic acid significantly decreased in leaf and slightly decreased in root. A total of 98 flavor components were detected in the leaf of coriander and total contents of those were 878.485mg/kg. The major components were (E)-2-Decen-1-ol, (E)-2-Decenal, and (E)-2-Tetradecenal. And a large amount of aldehydes and alcohols were shown in the leaf of coriander. By blanching, a total of 75 flavor components were detected in the leaf of coriander and total contents of those were 846.49mg/kg. The major components were (E)-2-decenal, (E)-2-Tetradecenal, decanal. The amounts of aldehydes were increased more. However, the amounts of alcohols were decreased more than those of the fresh leaf, respectively. A total of 77 flavor components were detected in the root of coriander and total contents of those were 455.064mg/kg. The major components were (E)-2-Tetradecenal, (E)-2-Decenal, and (E)-2-Dodecenal. By blanching, the kinds and the contents of the flavor components decreased and the major components is the same of the fresh root. And the contents of aldehydes and alcohols, acids decreased. However, the contents of esters and ketons increased.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.451-457
• /
• 2016

For a carferry with a displacement of 1,633 tonf, a seakeeping analysis-based direct load approach (DLA) was used in Part I of these series, where the final deliverable was the long-term probabilistic acceleration components. In Part II of these series, the tangential acceleration components are explained based on two approaches: a standard called the IMO CSS code and simple formulas with the probable maximum roll and pitch rotations. The subsequent tangential acceleration-induced external force components are also introduced for these two approaches. The lashing strength components were selected from the IMO CSS code. It was assumed that two different vehicles (a car and a truck) were stowed at the most distant locations on the main deck to assume the largest tangential acceleration components and were secured with four steel wires with longitudinal and transverse lashing angles of $45^{\circ}$. Four cases were considered, with different methods for predicting the acceleration components and different tools for the external loads and lashing strengths involved: cases Rule-LS (rule-based maximum probable roll and pitch angles for predicting the acceleration components in conjunction with LashingSafety), DLA-LS (seakeeping-based long-term acceleration components with LashingSafety), CSS-LC (IMO CSS code-based acceleration components using LashCon), and CSS-LS (IMO CSS code-based acceleration components using LashingSafety). In terms of the acceleration and external force components, the CSS-LC and CSS-LS results are more than two times the results of Rule-LS. Thus, when the external forces and lashing strengths are evaluated using CSS-LC and CSS-LS, the truck needs more lashing wires, while Rule-LS and DLA-LS predict that the present lashing configuration is on the safe side.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1443-1452
• /
• 1996

In this paper, we propose a semantic similarity measure for reusable software components, which aims to provide the automatic classification process of reusable to be stored in the structure of a software library, and to provide an efficient retrieval method of the software components satisfying the user's requirements. We have identified the facets to represent component characteristics by extracting information from the component descriptions written in a natural language, composed the software component identifiers from the automatically extracted terms corresponding to each facets, and stored them which the components in the nearest locations according to the semantic similarity of the classified components. In order to retrieve components satisfying user's requirements, we measured a semantic similarity between the queries and the stored components in the software library. As a result of using the semantic similarity to retrieve reusable components, we could not only retrieve the set of components satisfying user's queries. but also reduce the retrieval time of components of user's request. And we further improve the overall retrieval efficiency by assigning relevance ranking to the retrieved components according to the degree of query satisfaction.

• Earthquakes and Structures
• /
• v.10 no.1
• /
• pp.211-238
• /
• 2016

The Maximum seismic responses of steel buildings with perimeter moment resisting frames (MRF), modeled as complex MDOF systems, are estimated for several incidence angles of the horizontal components and the critical one is identified. The accuracy of the existing rules to combine the effects of the individual components is also studied. Two and three components are considered. The critical response does not occur for principal components and the corresponding incidence angle varies from one earthquake to another. The critical response can be estimated as 1.40 and 1.10 times that of the principal components, for axial load and interstory shears, respectively. The rules underestimate the axial load but reasonably overestimate the shears. The rules are not always inaccurate in the estimation of the combined response for correlated components. On the other hand, totally uncorrelated (principal) components are not always related to an accurate estimation. The correlation of the individual effects (${\rho}$) may be significant, even for principal components. The rules are not always associated to an inaccurate estimation for large values of ${\rho}$, and small values of ${\rho}$ are not always related to an accurate estimation. Only for perfectly uncorrelated harmonic excitations and elastic analysis of SDOF systems, the individual effects of the components are uncorrelated and the rules accurately estimate the combined response. The degree of correlation of the components, the type of structural system, the response parameter under consideration, the location of the structural member and the level of structural deformation must be considered while estimating the level of underestimation or overestimation.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.326-334
• /
• 1996

We investigated the optimum conditions for conversion of water-insoluble components of basidiocarps of Ganoderma lucidum to water-soluble components by hydrolyzing with chitinase. We also tried it with Ganoderma luciclum residue remaining after extracting hot water-soluble components of Ganoderma lucidum. After hydrolyzing under optimum conditions (20 ppm chitinase, 2% Ganoderma lucidum or 6% Ganoderma lucidum residue, at pH 3 and at $ 35^{\circ}C$), the contents of total water-soluble components (polysaccharide or protein) were measured, and it was found that the contents of water-soluble components increased to 1.5-2.7 fold. Michaelis constant, $K_m$ and maximum rate, $V_max$ calculated by Lineweaver-Burk plot for hydrolysis of Ganoderma lucidum were 1.75% and 0.02%/min respectively and those for hydrolysis of Ganoderma lucidum residue were 53.15% and 0.53%/min respectively The protein-bound polysaccharide was isolated after hydrolysis and molecular weights were measured by Sepharose CL-4B gel filtration and compared with the molecular weights of polysaccharide before hydrolysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.182-189
• /
• 2004

The application of adhesively bonded components is increasing in various industries such as automobile, aircraft, IC packages, and soldering techniques. In spite of such wide application in adhesively bonded components, nondestructive test techniques applying to adhesively bonded components have not been clearly established yet. In this paper, characteristics of ultrasonic test on interfaces of adhesively bonded components have been investigated by calculating transmission coefficient theoretically and experimentally. From the experimental results, the optimum conditions to establish frequencies for adhesively bonded homogeneous and dissimilar components are 4∼6 MHz and 2∼4 MHz, respectively.