• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.814-821
• /
• 2007

This study was estimated water quality to raw water quality management of the Maeri intake station in the Nakdong River using Multivariate Analysis. The results of Principle Component Analysis was explained up to 76.9% of total water quality by three principle components. The 1st, 2nd was explained 44.7%, 17.9% and third was explained 14.3%. Also, the three factors was derived from Factor Analysis. The 1st factor was estimated as the matabolism and organic matter pattern related to algal growth. The 2nd factor was judged as the pollution of pattern related to the discharge from stream of the Nakdong River and 3rd factor was viewed as the hydrological variation pattern related to particle matter. The results of Cluster Analysis were classified into three groups.

• Journal of Korean Society for Quality Management
• /
• v.44 no.1
• /
• pp.109-120
• /
• 2016

Purpose: This study developed a method of determining priorities for evaluating and revising defense standards. Methods: The proposed data integration and refinement methods are used to obtain component reliability information and to determine the frequency of component citation based on Pareto analysis. Based on the reliability information and the frequency of cited components, the target components for quality improvement can be determined and improved using various methods, such as engineering changes, special meetings, additional training, and revising the maintenance manual. Results: Based on the proposed process, we identified components that need to be improved in order to enhance the quality and reliability. Conclusion: Our process will improve the quality and reliability of weapon systems. The proposed process can be adopted for various weapon systems to enhance their quality and reliability, and to reduce military spending.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1410-1419
• /
• 1989

In this paper, we present a new synthetic high coding method which gives high image compression ratio. Given an image, only its low-pass component is transmitted by DCT coding` the high-pass component is not transmitted but synthesized using edge sharpening on the reconstructed low-pass image at the receiver. For the DCT coding which is used to encode the low-pass image, we used an improved version of Cox's variance estimator. Also, introduced are new image quality measures called GSNR and EPR which emphasize perceptual aspects of image quality. Experimental results show that the performance of the proposed synthetic high coding is better in various quality measures than that of Cox's adaptive transform coding. Also, it yields acceptable image quality with neither apparent block effect nor visible granular noise even at high compression ratio of about 30:1.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.187-191
• /
• 2012

The methods for constructing network of observational locations for measuring water quality in water reservoirs have been widely proposed, but they had some limitations to be applied to river areas, which lie in awkward clustering and finding representative observational locations among locations within each clustering. In this paper, a statistical approach to detect anomaly locations which were significantly different in important measurements for the water quality from the previous locations and construct observational network with them was proposed. Anomaly was detected with the sampling distribution of each primary principal component score, sum of primary PCs, or sum of residual PCs. The empirical study with the data of Nakdong Dam for guiding how to use our proposed approach and showing limitations of previous studied was described.

• Research in Community and Public Health Nursing
• /
• v.28 no.4
• /
• pp.494-503
• /
• 2017

Purpose: This study is to grasp factors influencing the quality of life in older adults after total knee replacement. Methods: This study was conducted with 165 older adults who had TKR at four orthopedic hospitals in D city. Data were analyzed using one-way ANOVA, independent t-test, Pearson's correlation, and stepwise multiple linear regression with SPSS 19.0 software. Results: Pain and depression were negatively correlated with range of motion, social support, while sense of coherence was positively correlated with quality of life. Sense of coherence (43%, ${\beta}=.40$), pain (8%, ${\beta}=-.30$), and depression (3%, ${\beta}=-.20$) on the Physical Component Summary in the quality of life have significant explanatory power of 54%. Sense of coherence (49%, ${\beta}=.44$), social support (6%, ${\beta}=.25$), and depression (3%, ${\beta}=-.22$) on the Mental Component Summary in the quality of life have significant explanatory power of 58%. Conclusion: This study suggests developing a program to improve the quality of life in older adults who had TKR, considering factors such as sense of coherence.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.98-103
• /
• 2016

Purpose: The purpose of this paper is to get a meaningful information for improving manufacturing quality of the products before they are produced in client's manufacturing process. Methods: A variety of data mining techniques have been being used for wide range of industries from process data in manufacturing factories for quality improvement. One application of those is to get meaningful information from process data in manufacturing factories for quality improvement. In this paper, the failure rate at client's manufacturing process is predicted by using the parameters of the characteristics of the product based on PCA (Principle Component Analysis) and regression analysis. Results: Through a case study, we proposed the predicting methodology and regression model. The proposed model is verified through comparing the failure rates of actual data and the estimated value. Conclusion: This study can provide the guidance for predicting the failure rate on the manufacturing process. And the manufacturers can prevent the defects by confirming the factor which affects the failure rate.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.401-409
• /
• 2009

Multivariate statistical approaches to classify sampling sites with measuring their similarity by water quality data and understand the characteristics of classified clusters have been discussed for the optimal water quality monitering network. For empirical study, data of two years (2005, 2006) at the 9 sampling sites with the combination of 2 depth levels and 7 important variables related to water quality is collected in Yongdam reservoir. The similarity among sampling sites is measured with Euclidean distances of water quality related variables and they are classified by hierarchical clustering method. The clustered sites are discussed with principal component variables in the view of the geographical characteristics of them and reducing the number of measuring sites. Nine sampling sites are clustered as follows; One cluster of 5, 6, and 7 sampling sites shows the characteristic of low water depth and main stream of water. The sites of 2 and 4 are clustered into the same group by characteristics of hydraulics which come from that of main stream. But their changing pattern of water quality looks like different since the site of 2 is near to dam. The sampling sites of 3, 8, and 9 are individually positioned due to the different tributary.

• Korean Journal of Occupational Health Nursing
• /
• v.28 no.2
• /
• pp.94-103
• /
• 2019

Purpose: This study aimed to investigate variables affecting health-related quality of life of manufacturing industry workers. Methods: We used data from 200 survey questionnaires collected from a vehicle manufacture factory located in Ulsan metropolitan area. The participants were manufacturing workers. The data were analyzed using t-test, one-way analysis of variance, and $Scheff{\acute{e}}^{\prime}s$ test to identify differences among variables. Pearson's correlation coefficient and stepwise multiple regression were used to identify variables that affected health-related quality of life. Results: The findings revealed that occupational stress and quality of sleep were statistically significant variables of the physical component score with an explanatory power of 42.2%. Occupational stress, depression, and religion were statistically significant variables of the mental component score with an explanatory power of 43.3%. Conclusion: Continuous monitoring and appropriate intervention for occupational stress, quality of sleep, and depression are needed to improve manufacturing workers' health-related quality of life.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.91-96
• /
• 2022

Article materials reflect the results of scientific research and generalization of experience concerning quality measurement of student's educational activities in the context of innovative development of the educational process, which is ensured by introducing educational innovations. The main point of monitoring of higher education students' activities and also phenomenon of education quality, particularly its results, are determined in the research. Guided by the scientific theory and personal experience of scientific and pedagogical activities, the attempt to single out the key components, important indicators and to introduce component indicator model of quality of higher education students' activities on the qualimetry base has been performed. Methodical solutions concerning the application of the developed model to determine the dynamics of pedagogical students' educational achievements by particular educational components in the process of innovative development of educational process are proposed. The advanced studies that relate to the development of methods for monitoring the quality of pedagogical higher education students' activities on the basis of systemic, competence and qualimetry approaches taking into account the levels of education and chosen specialties have been decided.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.1025-1030
• /
• 1997

This paper introduces the experimental results of ride values assessed for several passenger cars. The experiment was conducted at four vehicles on two roads for three persons by measuring the acceleration in the 12-axis of human. The results include the comparison of the ride values, such as the component ride values, overall ride value, and seat effective amplitude transmissibiity. It is proved that acceleration between 1 and 15Hz is the most significant in evaluating the ride quality. The contribution of the acceleration in each measurement axis is quantified from the component ride value. SEAT value shows a relatively low sensitivity for the road condition and human mass.