• 제목/요약/키워드: Component number

검색결과 1,913건 처리시간 0.029초

부품 집단화 현상을 이용한 PCB 조립 최적화 연구 (Optimization of PCB assembly using component gathering phenomenon)

  • 문기주;정현철
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
    • /
    • pp.632-635
    • /
    • 2004
  • PCB assembly is a complicated and difficult process to optimize due to the necessity of simultaneous consideration of rack assignment and board mounting sequencing. An efficient component mounting method is developed using component gathering phenomenon. It is found that same components are located closely each other by checking PCBs in field and interviewing PCB designers. A new method counting this phenomenon is developed and it is performed better with more number of total components and more number of gathered components cases. Simulation models are developed using Visual C++ for performance evaluation of the heuristic.

  • PDF

A Level Dependent Source Concoction Multilevel Inverter Topology with a Reduced Number of Power Switches

  • Edwin Jose, S.;Titus, S.
    • Journal of Power Electronics
    • /
    • 제16권4호
    • /
    • pp.1316-1323
    • /
    • 2016
  • Multilevel inverters (MLIs) have been preferred over conventional two-level inverters due to their inherent properties such as reduced harmonic distortion, lower electromagnetic interference, minimal common mode voltage, ability to synthesize medium/high voltage from low voltage sources, etc. On the other hand, they suffer from an increased number of switching devices, complex gate pulse generation, etc. This paper develops an ingenious symmetrical MLI topology, which consumes lesser component count. The proposed level dependent sources concoction multilevel inverter (LDSCMLI) is basically a multilevel dc link MLI (MLDCMLI), which first synthesizes a stepped dc link voltage using a sources concoction module and then realizes the ac waveform through a conventional H-bridge. Seven level and eleven level versions of the proposed topology are simulated in MATLAB r2010b and prototypes are constructed to validate the performance. The proposed topology requires lesser components compared to recent component reduced MLI topologies and the classical topologies. In addition, it requires fewer carrier signals and gate driver circuits.

Malignant Tumors of the Central Nervous System in Kazakhstan: Component Analysis of Incidence Dynamics

  • Igissinov, Nurbek;Akshulakov, Serik;Kerimbayev, Talgat;Adilbekov, Yerzhan;Aldiyarova, Nurgul;Rakhimbekov, Alexandr;Akpolatova, Gulnur;Tarzhanova, Dinar
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권6호
    • /
    • pp.2289-2295
    • /
    • 2015
  • The paper presents the incidence rates of malignant tumors of the central nervous system assessed by the component analysis. The data on primary registered cases of malignant tumors of the central nervous system in the country were used as the material of the study for the period from 2004 to 2011. A general trend of increase in the number of patients with malignant tumors of the central nervous system in Kazakhstan was determined and the potential of their increase was evaluated, which can be due to changes in the morbidity risk and age specifics, as well as the increase in population.

Component Analysis of Esophageal Cancer Incidence in Kazakhstan

  • Igissinov, S.;Igissinov, N.;Moore, M.A.;Kozhakhmetov, S.;Igissinova, G.;Sarsenova, S.;Aldiyarova, G.;Bilyalova, Z.;Zhabagin, K.;Manambayeva, Z.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권3호
    • /
    • pp.1945-1949
    • /
    • 2013
  • Esophageal cancer (EC) incidence rates in Kazakhstan were assessed by component analysis based on primary registered cases in 2001-2010. It was found that despite an apparent general decrease in the number of EC patients in Kazakhstan, a potential increase should be evaluated, due to changes in aging as well as the increase in population. Some problems of EC patients' registration were broached with an emphasis on the importance of the expected absolute number and reasons for undercounting in the country. Based on these, ways of improving the recording and registration of such patients in the country were suggested.

CH-OH PLIF와 Stereoscopic PIV계측법을 이용한 난류예혼합화염의 관찰 (Simultaneous Measurement of CH-OH PLIF and Stereoscopic PIV in Turbulent Premixed Flames)

  • 최경민
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2004년도 추계학술대회 논문집
    • /
    • pp.102-103
    • /
    • 2004
  • Simultaneous CH and OH planar laser induced fluorescence(PLIF) and stereoscopic particle image velocimetry(PIV) measurements have been developed to investigate the local flame structure of turbulent premixed flames. The developed simultaneous two radical concentrations and three component velocity measurements on a two-dimensional plane was applied for relatively high Renolds number turbulent premixed flames in a swirl stabilized combustor. All measurements were conducted for methane-air premixed flames in the corrugated flamelets regime. Strong three-dimensional fluctuation implies that misunderstanding of the flame/turbulent interactions would be caused by the analysis of two-component velocity distribution in a cross section. Furthermore, comparisons of CH-OH PLIF and three-component velocity field show that the burned gases not always have high-speed velocity in relatively high Renolds number turbulent premixed flame.

  • PDF

요소결합을 통한 범용 파워트레인 성능해석프로그램 개발 (General Automotive Powertrain Design with the Combination of the Component)

  • 서정민;이승종
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.439-442
    • /
    • 2002
  • Powertrain simulation is important far the analysis of a vehicle performance. Automotive powertrain has been considered as the unified system and should be remodeled, whenever a powertrain system is changed. In this study, a new method is proposed far the synthetic modeling for the automotive powertrain. Components are separated from the powertrain system and constructed the matrix through dynamic relationships. The dynamic equation of the total powertrain system can be driven from the combination of each component. In order to combine each component, the superposition method is modified for the powertrain composition.

  • PDF

여대생의 혈액성상과 면역 기능의 상관관계 (Correlation between Serum Component and Immune Function in Korean Female Colleges Students)

  • 이현옥;승정자
    • 한국식품영양과학회지
    • /
    • 제27권5호
    • /
    • pp.920-927
    • /
    • 1998
  • The purpose of this study was to investigate the correlation between serum component and immune function in Korean female college students according to the body mass index. There were significant increased in weight, body fat, LBM, TBW, WHR in subjects as their BMI increase(p<0.001). It was found obese group had higher levels of serum components such as total cholesterol, LDL-cholesterol and Cu levels than those of the normal group. There was a significant positive correlation between HDL-cholesterol level and NK cell number(p<0.01), between A/G ratio and T lympocytes number(p<0.05), between Cu levels and B lympocytes(p<0.01) in normal group. There was a significant positive correlation between TG level and CD4/8 ratio(p<0.001), between and IgG(p<0.001) in obese group.

  • PDF

A Study on Representative Skyline Using Connected Component Clustering

  • Choi, Jong-Hyeok;Nasridinov, Aziz
    • Journal of Multimedia Information System
    • /
    • 제6권1호
    • /
    • pp.37-42
    • /
    • 2019
  • Skyline queries are used in a variety of fields to make optimal decisions. However, as the volume of data and the dimension of the data increase, the number of skyline points increases with the amount of time it takes to discover them. Mainly, because the number of skylines is essential in many real-life applications, various studies have been proposed. However, previous researches have used the k-parameter methods such as top-k and k-means to discover representative skyline points (RSPs) from entire skyline point set, resulting in high query response time and reduced representativeness due to k dependency. To solve this problem, we propose a new Connected Component Clustering based Representative Skyline Query (3CRS) that can discover RSP quickly even in high-dimensional data through connected component clustering. 3CRS performs fast discovery and clustering of skylines through hash indexes and connected components and selects RSPs from each cluster. This paper proves the superiority of the proposed method by comparing it with representative skyline queries using k-means and DBSCAN with the real-world dataset.

COTS Component Quality Evaluation Using AHP

  • Oh Kie Sung
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 학술대회지
    • /
    • pp.712-716
    • /
    • 2004
  • Because of rapid development of software technology, a number of software professionals have been concerned with component-based development methodologies. Up to date, the evaluation of component quality has been focused on object-oriented metric based methodology. But this paper presents the selection process and evaluation criteria based on an MCDM(Multiple Criteria Decision Making) technique for the selection of optimal COTS component from consumers' viewpoints. We considered functionality, efficiency and usability based on ISO/IEC 9126 for quality measurement and conducted practical analysis into commercial EJB component in internet. This paper shows that the proposed selection technique is applicable for the selection of the optimal COTS component.

  • PDF