• KIEAE Journal
• /
• v.6 no.4
• /
• pp.3-10
• /
• 2006

To preserve scenic-view of Gwanak Mountain from the urban development, the viewshed component ratio and the scenic-view preference are investigated and analyzed by selecting view points at Nangokro. After 16 candidate view points are selected from the site, sight component ratio is measured through visual structure analysis and preference are measured by using the Likert scale. In addition, factor analysis, and regression analysis were conducted to examine the relationship between influencing factors and preference. As a result of the regression analysis of the 9 factors to influence the scenic-view preference, two factors such as degree of natural landscape and degree of arrangement around the site are chosen to influence the scenic-view preference. Through the preference factor analysis, two preference factors are selected as follows; 1) The factor of the landscape formation - Existence and nonexistence of the scenic-view conservation, degree of the landscape opening, and degree of natural landscape, degree of the landscape originality, and degree of the landscape sequence, degree of the landscape intimacy 2) The factor surrounding the landscape - Degree of arrangement around the site, degree of the landscape complexity, and atmosphere around the site.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.583-586
• /
• 2000

대부분의 응용 시스템들이 인터넷과 웹 기술을 기반으로 개발, 운영됨에 따라 상호운영성을 허용하고 동적 변화에 민첩하게 대응할 수 있는 소프트웨어 개발을 위한 방법론 및 툴 지원이 요구된다. 이에 따라 컴포넌트 기반의 소프트웨어 개발(CBD : Component Based Development)은 소프트웨어 시스템 구축을 위한 가장 이상적 전략으로 인식되고 있다. CBD 개발을 지원하기 위한 컴포넌트 저장소는 컴포넌트의 개발과 유통, 활용을 위한 컴포넌트 및 관련 모든 프로덕트 정보들의 통합적인 관리 중심체이다. 그러므로 효과적인 CBD의 전개를 위해서는 정규화된 컴포넌트 참조 아키텍쳐에 기반한 저장소 구축은 필수적이다. 본 논문에서는 CBD 방법론에 의한 컴포넌트 저장소 구축을 목적으로 저장 아키텍쳐를 제시하고 이를 기반한 저장소 프로토타이핑을 개발한다. 이를 위해 컴포넌트 기능성 영역의 수직적 관점과 라이프사이클 관점의 수평적 관점이 혼합된 아키텍쳐를 정의하고 이에 식별, 정의되어진 컴포넌트를 적용한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.735-741
• /
• 2011

In the early phase of vehicle development, CAE is conducted as tool for vehicle performance assessment. To maintain acceptable road noise performance, solution for reduced vehicle sensitivity is required. Chassis interface dynamic stiffness characteristics are key component to isolating vibration and noise of road from the vehicle interior. This research provide how to set up the optimized dynamic characteristics under noise effect through DFSS study. CAE-based DOE is performed to build prediction math model, CMS process involves DOE to achieve very fast run times while giving results very comparable. Minimized $95^{th}$ percentile of performance distribution is applied to minimize vehicle sensitivity and road noise levels variation during the optimization process. Finally, the results of optimization were reviewed for performance and robustness.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.

• Journal of Korean Society for Quality Management
• /
• v.43 no.4
• /
• pp.499-510
• /
• 2015

Purpose: This paper treats the improvement of the quality and reliability of military weapon systems based on the maintenance data. Methods: The proposed method of the data integration and refinement are used to obtain the component reliability information and to find the frequently failed components based on the Pareto analysis. Based on the reliability information and the number of failed component frequencies, the target components of quality improvement are determined and improved by multiple methods such as engineering changes, special meetings, additional training and revising maintenance manuals. Results: Based on the proposed process, we find some components which need to be improved in order to enhance the quality and reliability. Conclusion: A process is developed for improving the quality and reliability of weapon systems. This process will be adopted by various weapon systems to enhance the quality and reliability, as well as reduce military spending.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.58-64
• /
• 2003

Because of its tendency of making strong Hoc on the fiber surface with fines, Meogujaengi has not been valued as a material of Hanji. As an attempt to manufacture high value-added products using the material made from Jumchihanji, this study performed morphological classification and chemical component analysis and selection of pulping of Meogujaengi method. As a result, it can be concluded as follows, 1. Meogujaengi is assumed to be a local variety of Broussonetia karinoki and its outward appearance is distinguished from Broussonetia kazinoki. 2. The bast fiber of Meogujaengi is longer and thinner than that of Broussonetia papyrifera or Broussonetia kazinoki. However, because of the coarse linear of fiber tissue, there are many clusters. 3. The cluster phenomenon of Meogujaengi is nothing to do with its chemical components. Although the contents of its chemical components are different from those of Broussonetia kazinoki, no component was found that obstructs pulping. 4. The pretreatment for suppressing the occurrence of clusters of Meogujaengi was effective, and it was necessary to do secondary beating using hollander beater after beating mixed with PAM using knife beater.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.6-10
• /
• 1998

This study was conducted to obtain basic information on the development of new triticale cultivars with good quality and high productivity for soiling feed. Twelve cultivars introduced from Poland, Canada and two cultivars developed in Korea were planted in the experimental field at Ansong National University in 1995. Major growth traits and nutrient components for feed were measured and analyzed using principal component analysis and average linkage cluster analysis. 'Prego', 'Prag 46/3', and 'Clercal' were relatively high in forage yield. Most of forage nutrient contents except cellulose were higher in Prego, Clercal, and 'Cumulus' than other cultivars. Results of principal component analysis on 11 traits including forage yield and nutrient contents showed that 72.59% of total variation were explained by the first and second principal components. The Z$_1$ had high correlation with the contents of forage nutrient components and Z$_2$ with plant height, fresh, and dry weight. Fourteen cultivars were classified into 7 groups by multivariate analysis. Clercal and Prego in Group I could be useful source for the improvement of triticale as an important forage crop because they exhibited high productivity as well as high contents of nutrient components for feed.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1006-1008
• /
• 1997

This paper presents the logic based High Impedance Fault(HIF) detection rules for distribution lines. Due to the characteristics of HIF, which shows low current on relaying points, it is difficult to detect the fault occurred in distribution line by the conventional overcurrent relay(OCR) and/or harmonics relay. The HIF data were generated by using TACS in EMTP. In this paper, The harmonic index is defined as the ratio of harmonic component to fundamental component. The proposed HIF detection rules are obtained by analysing the difference between normal condition and HIF condition.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1347-1360
• /
• 2009

A multi-dimensional component for the thermal-hydraulic system analysis code, MARS, was developed for a more realistic three-dimensional analysis of nuclear systems. A three-dimensional and two-fluid model for a two-phase flow in Cartesian and cylindrical coordinates was employed. The governing equations and physical constitutive relationships were extended from those of a one-dimensional version. The numerical solution method adopted a semi-implicit and finite-difference method based on a staggered-grid mesh and a donor-cell scheme. The relevant length scale was very coarse compared to commercial computational fluid dynamics tools. Thus a simple Prandtl's mixing length turbulence model was applied to interpret the turbulent induced momentum and energy diffusivity. Non drag interfacial forces were not considered as in the general nuclear system codes. Several conceptual cases with analytic solutions were chosen and analyzed to assess the fundamental terms. RPI air-water and UPTF 7 tests were simulated and compared to the experimental data. The simulation results for the RPI air-water two-phase flow experiment showed good agreement with the measured void fraction. The simulation results for the UPTF downcomer test 7 were compared to the experiment data and the results from other multi-dimensional system codes for the ECC delivery flow.

• Journal of Korean Society on Water Environment
• /
• v.34 no.5
• /
• pp.487-493
• /
• 2018

Urban stormwater runoff is the one of the most extensive causes of deterioration of water quality in streams in urban areas. Especially, in the Suyeong River watershed, non-point sources from urban-residential areas are the most common cause of water pollution. Also, it has been ascertained that BOD and COD as indexes of organic matter, have limitation on management of Suyeong River's water quality. In this study, changes of organic matter properties of Suyeong River from inflow of non-point source during rainfall were investigated. Fractions of organic matters were analyzed using water samples collected at two sites (Suyeong River and Oncheon Stream) during a rain event. Variations of dissolved organic carbon (DOC) concentration by rainfall were similar to flow rate change in the river. Distribution of organic matter fraction according to change of rain duration revealed that while hydrophilic component increased at initial rainfall, the hydrophobic component was similar to change in dissolved organic carbon (DOC) concentration. Also, the relative proportion of hydrophilic components in organic matter in river water increased, due to rainfall. Results of biodegradation of organic matters revealed that decomposition rate of organic matters during rainfall was higher than that of during a non-rainfall event.