• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1199-1206
• /
• 2012

Recently, technologies to help the elderly or disabled people who have difficulty in walking are being developed. In order to develop these technologies, it is necessary to construct a system that gathers the gait data of people and analysis of these data is also important. In this research, we constructed the development of sensor system which consists of pressure sensor, three-axis accelerometer and two-axis gyro sensor. We used k-means clustering algorithm to classify the data for characterization, and then calculated the symmetry index with histogram which was produced from each cluster. We collected gait data from sensors attached on two subjects. The experiment was conducted for two kinds of gait status. One is walking with normal gait; the other is walking with abnormal gait (abnormal gait means that the subject walks by dragging the right leg intentionally). With the result from the analysis of acceleration component, we were able to confirm that the analysis technique of this data could be used to determine gait symmetry. In addition, by adding gyro components in the analysis, we could find that the symmetry index was appropriate to express symmetry better.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.27-35
• /
• 2004

There are two methods in estimating the remaining life of in-service airfield concrete pavement. They are a method simply using the past accumulated traffic and a method using the theoretical mechanistic analysis. Since the former method is somewhat far from the actual condition, the latter method is widely used by most engineers and researchers. The most essential component of the latter method is the fatigue model of the concrete slab. A fatigue model for airfield concrete pavement is developed in this study by a series of fatigue tests using 30 concrete cylinder specimens obtained from a 10 year old in-service airfield concrete slab. Strengths for the stress ratio calculation were obtained from the split tensile test of the cores sliced. Fatigue test mode was repeated split tensile test. The R2 of developed fatigue model was 0.5. Specimens taken from another airport had been tested for validation of the model. The results showed a good fit to the model. It was also found that the fatigue life predicted from the model was a tittle greater when the stress ratio is greater than 80 percent than other fatigue models developed earlier in America.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.500-507
• /
• 2002

By this study, on-line real-time radiometric system was developed using a 64 channels linear array of solid state detectors to measure wall thickness of insulated piping system. This system uses an Ir-192 as a gamma ray source and detector is composed of BGO scintillator and photodiode. Ir-192 gamma ray source and linear detector array mounted on a computer controlled robotic crawler. The Ir-192 gamma ray source is located on one side of the piping components and the detector array on the other side. The individual detectors of the detector array measure the intensity of the gamma rays after passing through the walls and the insulation of the piping component under measurement. The output of the detector array is amplified by amplifier and transmitted to the computer through cable. This system collects and analyses the data from the detector array in real-time as the crawler travels over the piping system. The maximum measurable length of pipe is 120cm/min. in the case of 1mm scanning interval.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.41-45
• /
• 2006

This paper deals with human spatial cognition using visual and auditory stimulation. More specially, this investigation is to observe the relationship between the head and the eye motor system for the localization of visual target direction in space and to try to describe what is the role of right-side versus left-side pinna. In the experiment of visual stimulation, nineteen red LEDs (Luminescent Diodes, Brightness: $210\;cd/^2$) arrayed in the horizontal plane of the surrounding panel are used. Here the LEDs are located 10 degrees apart from each other. Physiological parameters such as EOG (Electro-Oculography), head movement, and their synergic control are measured by BIOPAC system and 3SPACE FASTRAK. In the experiment of auditory stimulation, one side of the pinna function was distorted intentionally by inserting a short tube in the ear canal. The localization error caused by right and left side pinna distortion was investigated as well. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, a laser pointer was used for the pointing task. It was found that harmonic components were not essential for auditory target localization. However, non-harmonic nearby frequency components was found to be more important in localizing the target direction of sound. We have found that the right pinna carries out one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing to be localized. It was also found that the latency time is shorter in self moved tracking (SMT) than eye alone tracking (EAT) and eye hand tracking (EHT). These results can be used in further study on the characterization of human spatial cognition.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.5
• /
• pp.609-617
• /
• 2012

A dynamic water quality model is presented in order to simulate water quality under slowly varying flow conditions over time. To improve numerical accuracy, the proposed model uses a lumped system approach instead of extended period simulation, unlike the other available models. This approach can achieve computational efficiency by assuming liquid and pipe walls to be rigid, unlike the method of characteristics, which has been successfully implemented in rapidly varying flows. The discrete volume method is applied to resolve the advection and reaction terms of the transport equation for water quality constituents in pipes. Numerical applications are implemented to the pipe network examples under steady and unsteady conditions as well as hydraulic and water quality simulations. The numerical results are compared with EPANET2, which is a widely used simulation model for a water distribution system. The model results are in good agreement with EPANET2 for steady-state simulation. However, the hydraulic simulation results under unsteady flows differ from those of EPANET2, which causes a deviation in water quality prediction. The proposed model is expected to be a component of an integrated operation model for a water distribution system if it is combined with a computational model for rapidly varying flows to estimate leakage, pipe roughness, and intensive water quality.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.64-68
• /
• 2012

It has been suggested that Helicobacter pylori(H. pylori) infections can promote the development and progression of gastric cancer through the modulation of cell cycle regulators such as $p27^{Kip1}$ and Skp2. $p27^{Kip1}$ is a cyclin-dependent kinase (CDK) inhibitor that blocks the G1/S transition necessary for cell cycle progression. Skp2 is a component of the ubiquitin ligase complex called $SCF^{Skp2}$(SKP1-Cullin-F-box), which specifically binds and promotes the degradation of $p27^{Kip1}$. A low level of $p27^{Kip1}$ and a high level of Skp2 have been reported in many types of cancers, including gastric cancer. In addition, a decrease in $p27^{Kip1}$ has been reported in H. pylori-infected specimens. However, data on Skp2 in H. pylori infections are limited. This study examines the changes in the status of Skp2 in H. pylori-infected gastric epithelial AGS cells. For this, we stimulated AGS cells with H. pylori(NCTC 11637) at the ratio of 300:1(bacterium:cell) for 6 hours. The results of an immunoprecipitation analysis, followed by a western blot, indicate that the interaction between Skp2 and 14-3-3 was elevated 3 hours after the H. pylori treatment. In addition, there was an increase in cytoplasmic Skp2 after 3 hours, whereas there was no change in the nuclear level. Since it has been reported that interaction with 14-3-3 and the subsequent cytoplasmic translocation of Skp2 can increase its protein stability, increases in the interaction with 14-3-3 and the cytoplasmic Skp2 after the H. pylori treatment can increase the level of Skp2 in AGS cells. This phenomenon may explain, at least to some extent, the mechanism underlying the relationship between H. pylori infections and gastric carcinogenesis.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.837-844
• /
• 2014

This study was carried out to analyze the differences in p-hydroxylbenzyl alcohol (HBA) content, antitumor and anti-obesity activities and tyrosinase inhibitory activity between non-fermented G. elata (NFGP) and fermented G. elata powder. The HBA content, which is an index-component of G. elata decreased from 1.58 mg/g before fermentation to 1.07, 0.32, and 0.13 mg/g after the $1^{st}$ fermentation ($1^{st}$ FGP), $2^{nd}$ fermentation ($2^{nd}$ FGP) and $3^{rd}$ fermentation ($3^{rd}$ FGP), respectively. The anti-proliferation effects on the cell lines HT29 and AGS were significantly higher for the fermented G. elata than the NFGP. The antitumor activity was also increased in a fermentation number-dependent manner. During adipocyte differentiation, the ethanol extract of the $3^{rd}$ FGP inhibited lipid accumulation in 3T3-L1 cells significantly better than NFGP and the $1^{st}$ FGP, treated at the concentration of $10{\mu}g/mL$. The tyrosinase inhibitory activity of the $2^{nd}$ FGP at $600{\mu}g/mL$ over was higher than that of kojic acid. At the concentration of $1,000{\mu}g/mL$, the tyrosinase inhibitory activity was increased in a fermentation number-dependent manner. From these results, the fermented G. elata, especially the $3^{rd}$ FGP, is expected to be good candidate for the development of functional food and agents with antitumor, anti-obesity, and tyrosinase inhibitory potential.

• Publications of The Korean Astronomical Society
• /
• v.19 no.1
• /
• pp.83-92
• /
• 2004

In this paper, we introduce the development of the large storage system in order to record the observed space radio signal in the Korean VLBI Network(KVN) with high-speed. The KVN is the Very Long Baseline Interferometery(VLBI) to observe the birth of star, the structure of space by constructing radio telescope with diameter 21m at the Seoul, Ulsan, Jeju from 2001 to 2007 years. To do this, Korea Astronomy Observatory joined the international consortium for developing the high-speed large storage system(Mark 5), which is developed by MIT Haystack observatory. The Mark 5 system based on hard disk has to record up to 1 Gbps the observed space radio signal. The main features of Mark 5 system are as follows; First it is able to directly record the input data to the hard disk without PC1(Peripheral Component Interconnect) internal bus, and the second, it has two hard disk banks, which are able to hot-swap ATA/IDE type very cheap up to 1 Gbps recording and playback. The third is that it follows the international VLBI standard interface hardware(VSI-H). Therefore it can be connect directly the VSI-H type system at the input/output. Finally it also supports e- VLBI(Electronic-VLBI) through the standard Gigabits Ethernet connection.

• Korean Journal of Social Welfare
• /
• v.67 no.4
• /
• pp.325-348
• /
• 2015

The main purpose of the study is to explore the implications of Recognition Paradigm for domains of social work, especially focusing on the arguments exchanged between Axel Honneth and Nancy Fraser, two eminent scholars in this field. The Recognition paradigm, which is an alternative perspective in practical philosophy developed to cope with the changing socio-political situations in the late modern society, is providing the domain of social work with a lot of important theoretical and practical implications as well. In particular, Honneth's recognition theory which considers the recognition as a basic prototype in human development and construction of society is able to clarify the fundamental mission and territory the social work profession is to pursue. But for the meanwhile, Fraser's dual perspective of justice, which is an extended version of redistributive justice introducing the recognition component in it, can suggest diverse practical strategies to confront complex injustice-making structures effectively in the later modern society. In spite of these abundant implications in both theoretical and practical areas, the recognition paradigm still save several fundamental considerations for social work, such as the real meaning of the recognition in social work, the exact population from whom social work seek to get recognition, and the adequate strategy, so-called "recognition struggle" which social work is to employ to acquire the recognition.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.201-214
• /
• 1994

The fracture process zone in concrete is a region ahead of a traction-free crack, in which two major mechanisms, microcracking and bridging, play important roles. The toughness due to bridging is dominant compared to toughness induced by microcracking, so that the bridging is dominani: mechanism governing the fracture process of concrete. Fracture mechanics does work for concrete provided that the fracture process zone is being considered, so that the development of model for the fracture process zone is most important to describe fracture phenomena in concrete. In this paper the bridging zone, which is a part of extended rnacrocrack with stresses transmitted by aggregates in concrete, is modelled by a Dugdale-Barenblatt type model with linear tension-softening curve. Two finite element techniques are shown for the analysis of progressive cracking in concrete based on the discrete crack approach: one with crack element, the other without crack element. The advantage of the technique with crack element is that it dees not need to update the mesh topology to follow the progressive cracking. Numerical results by the techniques are demonstrated.