• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.47-54
• /
• 2020

To develop the bright-vivid red- and yellow-inorganic fluorescent pigments with high luminescence properties, A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were synthesized by a water assisted solid state reaction (WASSR) method and a conventional solid state reaction method. Although impurity peaks corresponding to the AVO₃ and AV₃O₈ (A = K, Rb, and Cs) were observed in all samples prepared, the trigonal structure A₃V₅O₁₄ (A = K and Rb) and orthorhombic structure Cs₂V₄O₁₁ were successfully obtained as a main phase. These inorganic pigments showed the broad absorption band (under 550 nm) originated from CT transitions of VO₄ polyhedron, and the strong broad red- and green-emission bands due to ³T₂ → ¹A₁ and ³T₁ → ¹A₁ transitions of the [VO₄]^3- group. The A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ pigments showed a bright-vivid red- and yellow-body color, where the a* values of the A₃V₅O₁₄ (A = K and Rb) were +35.5 and +45.9, respectively, and b* value of Cs₂V₄O₁₁ pigments was +50.3. The L* values of the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were over +45. These results indicate that the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments could be an attractive candidate as a bright-vivid red- and yellow inorganic pigments.

• Journal of Science Education
• /
• v.33 no.2
• /
• pp.336-345
• /
• 2009

The purpose of this study is to analysis ERF components patterns of causal questions generated during the observation of biological phenomenon. First, the system that shows pictures causing causal questions based on biological phenomenon (evoked picture system) was developed in a way of cognitive psychology. The ERF patterns of causal questions based on time-series brain processing was observed using MEG. The evoked picture system was developed by R&D method consisting of scientific education experts and researchers. Tasks were classified into animal (A), microbe (M), and plant (P) tasks according to biological species and into interaction (I), all (A), and part (P) based on the interaction between different species. According to the collaboration with MEG team in the hospital of Seoul National University, the paradigm of MEG task was developed. MEG data about the generation of scientific questions in 5 female graduate student were collected. For examining the unique characteristic of causal question, MEG ERF components were analyzed. As a result, total 100 pictures were produced by evoked picture and 4 ERF components, M1(100~130ms), M2(220~280ms), M3(320~390ms), M4(460~520ms). The present study could guide personalized teaching-learning method through the application and development of scientific question learning program.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1293-1301
• /
• 2016

Hulled oat (Chohan) and naked oat (Choyang) flours were analyzed according to particle size to investigate nutritional components and physicochemical properties. Particle size of naked oat flours was larger than that of hulled oat flours. As the mesh of the crushed ones decreased, particle sizes increased in value. The content of total ${\beta}$-glucan was highest in hulled oat flour (4.23%) with 60 mesh and in naked oat flour (4.26%) with 100 mesh. Most total ${\beta}$-glucan was soluble ${\beta}$-glucan in both flours (over 76%). Total starch of hulled oat flours (63.64~69.82%) was higher than that of naked oat flours (52.45~63.71%). Whereas amylose contents showed a negative correlation with total starch contents. Contents of free amino acids increased according to particle size, and each component was dependent on each type of amino acid. Moreover, while fatty acid composition was not significant, the content of most naked oats was higher than that of hulled oats. Besides, the ratio of unsaturated fatty acids (oleic acid and linoleate) in both types of oat flours was relatively higher than that of other grains. The pasting properties of peak viscosity, trough, and breakdown showed the highest value in both oats with 100 mesh. Further, the values of final viscosity and the setback were higher with relatively larger particle size. In addition, peak time exhibited a lower value with larger particle size, whereas it showed the opposite value for pasting temperature. Starch digestibility did not show any specific trend according to particle size, whereas expected glycemic index of hulled oats was lower than that of naked oats. Moreover, lower values were investigated at larger particle sizes. The results of this study provide basic useful information for processing of oat products to improve consumption of oats grown in Korea.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.701-710
• /
• 2004

Uncertainty was quantified to evaluate calcium determination result in infant formula with AAS (Atomic Absorption Spectrometry) and ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry). Uncertainty sources in measurand, such as sample weight, final volume of sample, sample dilution and the instrumental result were identified and used as parameters for combined standard uncertainty based on the GUM (Guide to the expression of uncertainty in measurement) and Draft EURACHEM/CITAC Guide. Uncertainty components of each sources in measurand were identified as resolution, reproducibility and stability of chemical balance, standard material purity, standard material molecular weight, standard solution concentration, standard solution dilution factor, sample dilution factor, calibration curve, recovery, instrumental precision, reproducibility, and stability, Each uncertainty components were evaluated by uncertainty types and included to calculate combined uncertainty. The kinds of uncertainty sources and components in the analytical method by AAS and ICP-AES were same except sample dilution factor for AAS. The analytical results and combined standard uncertainties of calcium content were estimated within the certification range $(367{\pm}20\;mg/100g)$ of CRM (Certified Reference Material) and were not significantly different between method by AAS followed by ashing and method by ICP-AES followed by acid digestion as $359.52{\pm}23.61\;mg/100g\;and\;354.75{\pm}16.16\;mg/100g$, respectively. Identifying uncertainty sources related with precision, repeatability, stability, and maintaining proper instrumental conditions as well as personal proficiency was needed to reduce analytical error.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.429-439
• /
• 2019

The objectives of this study were to gauge the extent of the forestry business through establishing the definition of forestry industry from the perspective of economic convergence and to analyze key components that affect each growth phase of a forestry business entity by classifying them. A total of 1,397 "sixth-sector industry" management entities were certified by the Ministry of Agriculture, Food, and Rural Affairs in South Korea from 2012-2017. Of these, 259 (18.5%) were in the forestry sector. In this study, the 259 forestry management entities were further classified into three phases based on sales distribution: entrance, development, and maturity. The entrance phase (<100 million KRW), development phase (>100 million and <1 billion KRW), and maturity phase (>1 billion KRW) constituted 33.2%, 55.4%, and 12.4% of the total 259 entities, respectively. The results showed that most of the management entities were either in the entrance or development phases, and only a small portion was in the maturity phase. To identify the key variables that affect each of the phases, chi-square analysis was used. We designed the "sixth-sector industry" type as an independent variable, whereas selected region, business organization, manager age group, forest product, processing type, and service type were designated as dependent variables. The results of the analysis showed that the processing and service types influenced all three developmental phases. Moreover, as the phase advanced, processing type showed a higher proportion of health-functional ingredients, such as powder or extract from forest products, which enable to develop and produce a variety of products. Service type also changed from simple experience to integrated experience tourism and finally to tourism education. Distribution and sales channel also turned out to be a significant factor during the development phase. This study provides the basic information needed to guide government support in the implementation of a formal forestry business through convergence as well as to increase the efficiency of business management.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.319-325
• /
• 2022

Triticale forage has the highest yield of all winter forage crops, including rye, and a cold tolerance within an average low temperature of -10℃ in January. Therefore, this study analyzed the effects of sowing and harvesting times on the feed value and functional components of triticale to optimize the use and supply of triticale as livestock fee Room temperature' can vary widely with climate, season, and time of day. In order to clearly state the conditions of the study in a manner that facilitates replication by other researchers, please consider using an approximate temperature range instead. Seeds of the triticale 'Joseong' were sown during the fall of 2021 (October 20th) and spring of 2022 (March 7th). The triticale was harvested at the following growth stages: seedling stage, booting stage, heading stage, 10 days after heading, and 20 days after heading. The moisture content of each harvested triticale was adjusted to approximately 60%, and the triticale was fermented for silage for 40 days at ambient temperature under anaerobic conditions. We measured the pH and organic acid content of each silage to determine the feed value and functional component. The lactic acid content of the triticale silage harvested at the seedling stage sown in both fall and spring (1.61%, 1.63%) was the highest among all the silages. The octacosanol content in the silages of both fall-sown and spring-sown triticale harvested at the seedling stage (0.38, 0.27 mg/ml) was the highest. Overall, the results revealed that harvesting time had a greater impact on the feed value and functional components of triticale silage than sowing time.

• Journal of Life Science
• /
• v.30 no.1
• /
• pp.45-57
• /
• 2020

The prenatal period in livestock animals is crucial for meat production because net increase in the number of muscle fibers is finished before birth. However, there is no study on the growth and development mechanism of muscles in Hanwoo during this period. Therefore, to find candidate genes involved in muscle growth and development during this period in Hanwoo, mRNA expression data of longissimus in Hanwoo at 6 and 9 months post-conceptional age (MPA) were analyzed. We independently identified differentially expressed genes (DEGs) using DESeq2 and edgeR which are R software packages, and considered the overlaps of the results as final-DEGs to use in downstream analysis. The DEGs were classified into several modules using WGCNA then the modules' functions were analyzed to identify modules which involved in myogenesis and adipogenesis. Finally, the hub genes which had the highest WGCNA module membership among the top 10% genes of the STRING network maximal clique centrality were identified. 913(6 MPA specific DEGs) and 233(9 MPA specific DEGs) DEGs were figured out, and these were classified into five and two modules, respectively. Two of the identified modules'(one was in 6, and another was in 9 MPA specific modules) functions was found to be related to myogenesis and adipogenesis. One of the hub genes belonging to the 6 MPA specific module was axin1 (AXIN1) which is known as an inhibitor of Wnt signaling pathway, another was succinate-CoA ligase ADP-forming beta subunit (SUCLA2) which is known as a crucial component of citrate cycle.

• Journal of KIISE:Software and Applications
• /
• v.37 no.7
• /
• pp.518-535
• /
• 2010

Cloud Computing is emerged as an effective reuse paradigm, where service providers operate hardware and software and as a service, and service consumers invoke the service through Internet. Software-as-a-Service (SaaS) is a type of cloud services, where the whole software is designed as a service so that several consumers can reuse the SaaS. While tradition software applications are developed for a specific organization, SaaS is developed for multiple users in the various organizations. Hence, reusability is very essential characteristic of SaaS. Reusability is defined as a metric of how effective and efficient software functionalities can be used by various users. Reusability in SaaS is evaluated by considering three sub-characteristics; applicability, adaptability, and scalability. Since such a SaaS has considerable differences and characteristics from traditional software applications, conventional methods including object-oriented modeling, component-based development method, and service-oriented architecture (SOA) service development method would be limited in developing services which can fulfill these three sub-characteristics related to reusability as well as SaaS-intrinsic characteristics. Hence, there is a great demand for effective processes for developing SaaS cloud services. In this paper, we present a practical process for developing SaaS, which focuses on ensuring reusability. And by performing a case study with our proposed SaaS development process, we evaluate applicability of our proposed process and explain how the process is used in a real domain. Then, we compare our proposed process with others for verifying our study. Through the proposed process, cloud services with high quality can be more effectively developed.

• Korean Journal of Clinical Pharmacy
• /
• v.11 no.2
• /
• pp.49-56
• /
• 2001

Acetyl-L-carnitine (ALC), an endogenous component of the L-carnitine family, is a naturally existing molecule synthesized from L-carnitine (LC) by carnitine acetyl transferase. ALC has been shown to improve the cognitive performance of patients suffering from dementia of the Alzheimer's type and proposed for treating Alzheimer's disease in pharmacological doses. The purpose of the present study was to evaluate the bioefuivalence of two ALC tablets, $Nicetile^{TM} (Dong-A Pharmaceutical Co.) and $L-Cartin^{TM}$ (Kuhn Il Pharmaceutical Co.), according to the guidelines of Korea Food and Drug Administration (KFDA). The ALC release from the two ALC tablets in vitro was tested using KP VII Apparatus II method in various dissolution media (pH 1.2, 6.0 and 6.8). Twenty six normal male volunteers, $24.46\pm3.67$ years in age and $64.45\pm5.54$ kg in body weight, were divided into two groups and a randomized $2\times2$cross-over study was employed. After one tablet containing 500 mg of ALC was orally administered, blood was taken at predetermined time intervals and the concentrations of ALC in serum were determined using HPLC with fluorescence detector. Because of the presence of endogenous ALC, the calibration was performed using dialyzed serum. The dissolution profiles of the two ALC tablets were similar in all the dissolution media. The pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_{max}$ were calculated and ANOVA was utilized for the statistical analysis of the parameters. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two tablets were $0.35\%,\;0.93\%\;and\;2.34\%$ respectively, when calculated against the $Nicetile^{TM} tablet. The powers $(1-\beta)\;for\;AUC_t$ , and Cmax were $98.72\%\;and\;85.48\%$, respectively. Minimum detectable differences $(\Delta)\;at\;\alpha=0.05\;and\;1-\beta=0.8$ were less than $20\%,\;(e.g.,\;13.21\%\;and\;18.42\%\;for\;AUC_t,\;and\;C_{max}$ respectively). The $90\%$ confidence intervals were within $\pm20\%\;(e.g.,\;-7.38\sim8.09\;and\;-9.86\sim11.72\;for\;AUC_t,\;and\;C_{max}$, respectively). These two parameters met the criteria of KFDA for bioequivalence, indicating that $L-Cartin^{TM}$ tablet is bioequivalent to $Nicetile^{TM} tablet.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.2076-2081
• /
• 2013

The objective of this study is to investigate the gastric emptying and gastrointestinal transit improvement effect of DL-methionine methylsulfonium chloride (MMSC) in functional dyspepsia animal models. Cisplatin causes nausea, vomiting, and inhibition of gastric emptying. Rats were divided into four groups: G1 (normal group), G2 (gastric emptying induced by cisplatin), G3 (gastric emptying induced by cisplatin with itopride 30 mg/kg pretreatment), and G4 (gastric emptying induced by cisplatin with MMSC 4 mg/kg pretreatment). Immediately after an oral administration of a liquid meal (phenol red), delayed gastric emptying was induced by cisplatin (10 mg/kg (i.p.)). After 20 min in the cisplatin administration, the animals were sacrificed. In rats treated with cisplatin, the gastric emptying rate was significantly reduced. On the other hand, MMSC reversed the reduction of gastric emptying induced by cisplatin. And also, MMSC caused to travel FITC-dextran more significantly longer distance than the control, which is based on the values of the mean geometric center in the atropine driven delayed gastrointestinal transit animal models. Furthermore, MMSC drastically increased the gastrointestinal transit in rats, considerably increased the values of the mean geometric center (MGC), compared to the control, which was comparable to that of mosapride. These results suggest that MMSC could be an effective component for the treatment of functional dyspepsia.