• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.286-294
• /
• 2019

The purpose of this study is to determine what children's rights to play are. For this purpose, we extracted the core contents of schools' play environments and we developed a checklist that schools can use to evaluate their own play environments. We reviewed the UN Committee on the Rights of Children and the General Comments No. 17. Through this process, we found 16 core contents that the play environment should have. We conducted focus group interviews with children, parents and teachers, who are principle people involved with school play. The focus group interviews discussed the basic elements of the school play environment. The contents' validity was reviewed by a group of professionals. Based on this, we created an evaluation checklist with 10 major areas of the school play environment. The 10 areas of the school play environment evaluation scale are as follows. The ten areas of the play environment assessment scale for the school environment to ensure children's right to play are sufficient play time, sufficient play space, a child's best interests and the child's participation, nondiscrimination, diversity and freedom, challenge and adventure, safety, school policy, the play has an educating component, and community cooperation.

• Korean Journal of Biological Psychiatry
• /
• v.25 no.4
• /
• pp.118-124
• /
• 2018

Objectives Although impulsivity has long been thought as an important factor influencing suicidal behaviors, it is unknown whether impulsivity increases the risk of dying from suicidal behaviors and what specific component among constructs of impulsivity contributes to the risk of dying among suicide attempters. Methods To elucidate the association between impulsivity and medical lethality of suicide attempt among suicide attempters, we consecutively recruited 46 suicide attempters who visited an emergency room of a general hospital located in a metropolitan area, Seoul, Republic of Korea, due to suicide attempts and consented to participate in this study. Then we assessed medical lethality with the Beck Lethality Scale (LS) and impulsivity with the Korean version of the Barratt Impulsiveness Scale-11-Revised (BIS). Demographic variables were obtained from medical records and structured social work reports for suicide attempters. Results Although total scores of the BIS did not correlate with LS scores, only the scores of self-control, that is one of the Barrett's six theoretical constructs of impulsivity in which the higher score indicates less self-control and more impulsivity, had a significant positive correlation with scores of LS (p = 0.003). The association remained significant after adjusting for variables known to affect suicide lethality such as job status, recent alcohol consumption, diagnosis of depressive disorders, and having a plan for suicide (${\beta}=0.429$, p = 0.009). Conclusions Not impulsivity in general, but poor self-control, in particular, predicts lethal suicidal behaviors among suicide attempters. The degree of self-control should be evaluated when assessing patients with elevated suicide risk, and proper measures should be installed to prevent possible future lethal suicide attempts.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.540-547
• /
• 2011

This study was conducted to compare classification accuracy by tree species using QuickBird imagery for pixel- and segment-based classifications that have been mostly applied to classify land covers. A total of 398 points was used as training and reference data. Based on this points, the points were classified into fourteen land cover classes: four coniferous and seven deciduous tree species in forest classes, and three non-forested classes. In pixel-based classification, three images obtained by using raw spectral values, three tasseled indices, and three components from principal component analysis were produced. For the both classification processes, the maximum likelihood method was applied. In the pixel-based classification, it was resulted that the classification accuracy with raw spectral values was better than those by the other band combinations. As resulted that, the segment-based classification with a scale factor of 50% provided the most accurate classification (overall accuracy:76% and ${\hat{k}}$ value:0.74) compared to the other scale factors and pixel-based classification.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.3
• /
• pp.65-80
• /
• 2022

Objective : This study examined the psychometric properties of the 12-item Coping Orientation to Problems Experienced Scale (COPE) using Rasch analysis. COPE is one of the instruments used to measure stress-coping skills. Methods : The study participants were 480 community-dwelling older adults. We tested the instrument's unidimensionality assumption using principal component analysis (PCA). Item fit was examined using infit-and-outfit mean-square (MnSq) and standardized fit statistics (ZSTD). The precision and item difficulty hierarchies of the instrument were examined. The item-difficulty hierarchy was investigated to identify the easy and difficult items. We tested differential item functioning (DIF) for sex and age groups. Results : PCA revealed that the instrument met the unidimensionality assumption (eigenvalue = 1.78). Among the 12 items, item 2 was removed because of misfit (Infit MnSq = 1.33, Infit ZSTD = 5.05, Outfit MnSq = 1.56, Outfit ZSTD = 7.15). The remaining 11 items demonstrated a conceptual item-difficulty hierarchy. The person strata value was 3.10, which is equivalent to a reliability index value of 0.81. There was no DIF for the sex and age groups (DIF contrast <0.27). Conclusion : The findings indicated that the revised COPE-11 has adequate item-level psychometric properties and can accurately measure stress coping skills.

• Journal of Korea Port Economic Association
• /
• v.39 no.4
• /
• pp.147-161
• /
• 2023

As global challenges, particularly climate change, become more pressing, there is a growing global awareness of Environmental, Social, and Governance (ESG) management. Given the crucial role played by the logistics industry in the complex network of the global supply chain, various societal stakeholders are emphasizing the necessity for logistics entities to practice ESG management. Despite the comprehensive ESG guidelines established by Korea for all enterprises, a notable limitation arises from its inadequate consideration of the distinctive features inherent to logistics enterprises, especially those of a smaller and medium scale. Accordingly, this study conducts a thorough examination of existing ESG guidelines, sustainable management approaches in large-scale logistics enterprises, and prior research to identify potential ESG management diagnostic criteria relevant to small and medium-sized logistics enterprises, including aspects such as Public(P), Environmental(E), Social(S), and Governance(G). To streamline the diagnostic criteria, taking into account the unique characteristics of small and medium-sized logistics enterprises, this study conducts a survey involving 60 logistics company personnel and experts from academic and research domains. The collected data undergoes Principal Component Analysis (PCA), revealing that the four dimensions of information disclosure can be consolidated into a single dimension. Additionally, environmental criteria reduce from 16 to 3 items, societal considerations decrease from 22 to 7 items, and governance structures distill from 20 to 5 items. This empirical endeavor is deemed significant in presenting tailored ESG management diagnostic criteria aligned with the specificities of small and medium-sized logistics enterprises. The findings of this study are expected to serve as a foundational resource for the development of guidelines by relevant entities, promoting the wider adoption of ESG management practices in the sphere of small and medium-sized logistics enterprises in the near future. population coming from areas other than Gwangyang, where Gwangyang Port is located.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.141-152
• /
• 2005

This study focused on the relationships among leaf and smoke components and sensory properties following tobacco leaf blending. A completely randomized experimental design was used to evaluate components of leaf and smoke and sensory properties for sample cigarettes with four mixtures of flue cured and burley tobacco (40:60, 60:40, 80:20 and 100:0). Eleven leaf components, six smoke components, and eight sensory properties of smoking taste were analyzed. A sensory evaluation method known as quantitative descriptive analysis was used to evaluate perceptual strength on a fifteen score scale. Raw data from ten trained panelists were obtained and statistically analyzed. Based on the MANOVA, clustering analysis, correlation matrix and partial least square (PLS) method were applied to find out which smoke component most affected sensory properties. The PLS method was used to remove the influence between explanatory variables in the leaf, smoke components derived from the results. High correlations (p<0.0l) were found among ten specific leaf and smoke components and sensory attributes. Total nitrogen, ammonia, total volatile base, and nitrate in the leaf were significantly correlated (p<0.05) with impact, bitterness, tobacco taste, irritation, smoke volume, and smoke pungency. From the results of PLS analysis, influence variables are used to explain about the correlation. In terms of bitterness, with only two explanatory variables, Leaf $NO_3$ and Leaf crude fiber were enough for guessing their correlation. In the distance weighted least square fitting analysis, carbon monoxide highly influenced bitterness, hay like taste, and smoke volume.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.18-20
• /
• 2000

At 1:47 a.m, local time on September 21, 1999, a strong earthquake measured 7.3 on the Richter scale struck central Taiwan evoking another two earthquakes a few seconds late to wake up unprepared people of this small island. It caused 2,465 people killed 11,305 injured about 10,000 buildings collapsed and around 41,000 severely damaged, The major concerns after the earthquake are how to have learned from this natural disaster and how to rebuild earthquake-proof buildings without rendering up safety within reasonable costs. Inevitable actions for redrafting the building codes have been taken to re-strengthen the existing and new structures. Structural analysis tools and computer programs adopted by most practicing engineers have been re-examined to take into account the effects of the vertical component of ground shakings on structural responses. Most private structures were repaired by traditional methods without considering upgrading seismic resistibility because of economical reasons. Buildings open to the public are under consideration possibly enforced by making regulations to be upgraded to satisfy revised building codes. In addition new rehabilitation technologies such as structural control have been moving much faster than before and have become accepted by the public due to frequent reports by media and specialists. Building codes related to base isolators and energy absorption systems are still under legislation and expected to be published soon. Most of the new structures under construction designed by the building codes promulgated before the earthquake have been reconsidered to comply with the new codes even though it is not compulsory. Efforts have been made by the government engineering and research communities and universities in an attempt to reduce structural damage for future earthquakes and to construct if possible Taiwan as an earthquake-proof island.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.459-470
• /
• 2014

During ship design, welding-induced distortions are roughly estimated as a function of the size of the component as well as the welding process and residual stresses are assumed to be locally in the range of the yield stress. Existing welding simulation methods are very complex and time-consuming and therefore not applicable to large structures like ships. Simplified methods for the estimation of welding effects were and still are subject of several research projects, but mostly concerning smaller structures. The main goal of this paper is the application of a multi-layer welding simulation to the block joint of a ship structure. When welding block joints, high constraints occur due to the ship structure which are assumed to result in accordingly high residual stresses. Constraints measured during construction were realized in a test plant for small-scale welding specimens in order to investigate their and other effects on the residual stresses. Associated welding simulations were successfully performed with fine-mesh finite element models. Further analyses showed that a courser mesh was also able to reproduce the welding-induced reaction forces and hence the residual stresses after some calibration. Based on the coarse modeling it was possible to perform the welding simulation at a block joint in order to investigate the influence of the resulting residual stresses on the behavior of the real structure, showing quite interesting stress distributions. Finally it is discussed whether smaller and idealized models of definite areas of the block joint can be used to achieve the same results offering possibilities to consider residual stresses in the design process.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.203-211
• /
• 2012

The main object of this experiment is to estimate the hydrodynamic forces acting on a submerged streamlined body placed in a one-end-opened cylindrical tube moving with certain translational velocity. The best experimental design for this object is mimicking real situation, however sizes of model body and cylinder tube are just the same as those of real, for avoiding scale effects, mimicking real situation is not realizable. Hence, in this experiment, target body and cylindrical tube were designed to be towed with varying body position relative to cylindrical tube. For measuring hydrodynamic forces and flow velocity in the cylindrical tube, six one-component load cells and several one-hole Pitot tubes were used. Several conditions were checked with various end-plates those had different opening areas. Experiment results show that forces and flow velocity had different tendency with those expected, and the presence of a end-plate slows down the flow velocity in the cylindrical tube and affects pressure field in the tube to push the model submerged body forward of the tube. This tendency grows with decreasing opened area.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.163-171
• /
• 2012

The objective of this study was to analyze the characteristics of traditionality expressions at modernized Chinese restaurant in Hong Kong. As a case study, the study examined 12 modernized Chinese restaurants in Hong Kong. The gathered data were categorized and examined according to the ways of traditionality expressions, which included reproduction, transformation, and reinterpretation of traditional components. Each of the components was measured for the amount of traditional or modernity expression on a five-point scale. The five-point scoring system put an emphasis on heritage; 1 point was given to principal modernity(modernity: 90-100% + tradition: 0-10%), 2 points were given to principal modernity + auxiliary tradition(modernity: 70-90% + tradition: 10-30%), 3 points were given to the same ratio between tradition and modernity(modernity: 40-60% + tradition: 40-60%), 4 points were given to principal tradition + auxiliary modernity(modernity: 10-30% + tradition: 70-90%), and 5 points were given to principal tradition(modernity: 0-10% + tradition: 90-100%). The analysis performed according to those criteria and methodologies led to the following findings and conclusions: Traditional components were most reproduced in the ornaments placed all over the restaurant and applied to the chirography of the restaurant logos, walls, and windows/doors in a big number. The methodology of transforming tradition was evenly applied to each of the spatial components. With the most transformations occurring to the lattices, there were many different ways to transform tradition including the partition, chirography, pattern, red lantern, furniture and ornament, and traditional materials that were turned into modern ones. Few examples of reinterpreting tradition were observed in the restaurant titles, inside floors, and ceilings, but plenty of examples were found in the walls, windows/doors, lighting, and furniture in a range of ways. Most of them reinterpreted the traditional forms and added altered patterns to them to remind customers of tradition. In short, all of the three ways of expressing tradition were actively applied to each component in an array of ways.