• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.349-355
• /
• 2010

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This paper leads to separate a in-out data overload of integrated EPCIS event and suggests the method to effectively manage EPCIS repository for exchanging data smoothly. In order to verify a effectiveness, we measure the performance of the system using a simple testing simulation by comparing existing method and suggested method.

• Tunnel and Underground Space
• /
• v.9 no.3
• /
• pp.175-184
• /
• 1999

Systematic measurements in the field are the key component in the design process to ensure that optimal and safe designs result. The instruments installed at the Waste Isolation Pilot Plant, a underground nuclear waste repository in U.S., for measuring rock deformation was reviewed. Also discussions about installation and measurement for better understanding the complex time-dependent deformational behavior of underground excavation were made.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.169-174
• /
• 2010

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This paper deals with the method which diversifies the data flow load of intensive EPCIS events and effectively manages EPCIS repository for exchanging data smoothly. In order to verify a effectiveness, we measure the performance of the system using a simulation by comparing the existing method with the suggested method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.spc
• /
• pp.75-87
• /
• 2020

The Korea Atomic Energy Research Institute (KAERI) has developed geological repository systems for the disposal of high-level wastes and spent nuclear fuels (SNFs) in South Korea. The purpose of the most recently developed system, the improved KAERI Reference Disposal System Plus (KRS⁺), is to dispose of all SNFs in Korea with improved disposal area efficiency. In this paper, a system-level safety assessment model for the KRS⁺ is presented with long-term assessment results. A system-level model is used to evaluate the overall performance of the disposal system rather than simulating a single component. Because a repository site in Korea has yet to be selected, a conceptual model is used to describe the proposed disposal system. Some uncertain parameters are incorporated into the model for the future site selection process. These parameters include options for a fractured pathway in a geosphere, parameters for radionuclide migration, and repository design dimensions. Two types of SNF, PULS7 from a pressurized water reactor and Canada Deuterium Uranium from a heavy water reactor, were selected as a reference inventory considering the future cumulative stock of SNFs in Korea. The highest peak radiological dose to a representative public was estimated to be 8.19×10^-4 mSv·yr^-1, primarily from ¹²⁹I. The proposed KRS⁺ design is expected to have a high safety margin that is on the order of two times lower than the dose limit criterion of 0.1 mSv·yr^-1.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2002

Component-based software development(CBSD) is gaining popularity Effective search and retrieval of desired components, which are stored in a component repository, is a very important issue in CBSD. In this paper. a new weighted synaptic connectivity matrix is proposed to find more appropriate components. An algorithm is proposed for effective search with NOT operator and a proof for the algorithm is Presented . A new procedure to calculate the output vector for a logically combined query is also presented.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.439-455
• /
• 2019

A buffer is the major component of a high level radioactive waste repository. Due to their thermal conductivity and low permeability, bentonites have been considered as a key component of a buffer system in most countries. The deep geological condition generates ground water inflow and results in swelling pressure in the buffer and backfill. Investigation of swelling pressure of bentonite buffer is an important task for the safe disposal system. The swelling pressure that can be critical is affected by mechanical and hydro properties of the system. Therefore, in this study, a sensitivity analysis was conducted to examine the effect of hydro-mechanical (HM) behaviors in the MX-80 bentonite. Based on the results of the swelling pressure generation with HM model parameters, a coupled HM analysis of an unsaturated buffer and backfill in a deep geological repository was also carried out to investigate the major factor of the swelling pressure generation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.109-111
• /
• 2002

객체기술의 확장, 분산처리기술의 발전과 더불어 주목받는 컴포넌트 기반 소프트웨어 구축기술은 기존의 프로그래밍 기술을 대체하는 효율적인 기법으로 평가받고 있다. 소프트웨어의 재사용 측면에서 이러한 컴포넌트들은 프로그램 개발의 생산성 증대에 기여하는 것은 사실이지만 이러한 효과가 현실화되기 위해서는 기본적인 제반요소 -검색 및 저장소, 효과적인 컴포넌트 서술- 가 해결되어야 한다. 이에 본 논문에서는 컴포넌트의 명세를 기반으로 한 컴포넌트 저장소 모델을 제안한다. 이러한 컴포넌트의 명세는 인터페이스 기술에 대만 명세, 상속등과 같은 재사용에 대한 정보, 인터페이스들을 포함하는 컴포넌트 명세들 간의 상호작용에 관만 정보를 포함한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.211-223
• /
• 2005

The current software development type is based on CBD (Component Based Development). However, it requires a new component model that can support rapid and accurate component information on the web due to the cost increase of building new components using CBD. The purposed of this paper is to promptly develop an application on the web which fulfills users' demand and to provide specific interface regarding the small scales of distributed component in business domains. The e-BCOS(e-Business Component System) is the agent system for the users to register distributed components and to search component information, which would increase reusability through the e-business component development of distributed components in business domains and help the users understand the information about the component. Moreover, XML is employed for specification which allows smooth specification sharing and delivery to satisfy users' variable demands.