• 제목/요약/키워드: Component Map

검색결과 369건 처리시간 0.027초

계층 간 특징 복원-예측 네트워크를 통한 피라미드 특징 압축 (Pyramid Feature Compression with Inter-Level Feature Restoration-Prediction Network)

  • 김민섭;심동규
    • 방송공학회논문지
    • /
    • 제27권3호
    • /
    • pp.283-294
    • /
    • 2022
  • 딥 러닝 네트워크에서 사용되는 특징 맵은 일반적으로 영상보다 데이터가 크며 특징 맵을 전송하기 위해서는 영상의 압축률보다 더 높은 압축률이 요구된다. 본 논문은 딥러닝 기반의 영상처리에서 객체의 크기에 대한 강인성을 가지는 FPN 구조의 네트워크에서 사용되는 피라미드 특징 맵을 높은 압축률로 전송하기 위해 제안한 복원-예측 네트워크를 통해 전송된 일부 계층의 피라미드 특징 맵으로 전송하지 않은 계층의 피라미드 특징 맵을 예측하며, 압축으로 인한 손상을 복원하는 구조를 제안한다. 제안한 방법의 COCO 데이터셋 2017 Train images에 대한 객체 탐지의 성능은 rate-precision 그래프에서 VTM12.0을 통해 특징 맵을 압축한 결과 대비 BD-rate 31.25%의 성능향상을 보였고, PCA와 DeepCABAC을 통한 압축을 수행한 방법 대비 BD-rate 57.79%의 성능향상을 보였다.

성능데이터를 이용한 고고도운용 터보프롭엔진 역모델링 연구 (Study on Inverse Modeling of a Turboprop in High Altitude Operation using Engine Performance Data)

  • 공창덕;임세명;김지현
    • 한국추진공학회지
    • /
    • 제14권3호
    • /
    • pp.16-22
    • /
    • 2010
  • 가스터빈 엔진의 성능은 구성품 성능 특성에 큰 영향을 받는다. 일반적으로 구성품 성능 특성은 여러 조건에서의 많은 실험을 통해서만 얻을 수 있어 많은 시간과 비용이 소모되므로 엔진 제작자는 엔진 구매자에게 고비용의 구성품 성능 특성맵의 제공을 하지 않는다. 따라서 일반적으로 유사한 성능맵을 스케일링하여 사용하는데, 이 방법은 탈설계점에서 큰 오차를 보이는데 특히 성층권 이상의 고도에서 운용되는 가스터빈 성능은 더욱 차이를 보인다. 이에 본 연구는 PT6A-67A 터보프롭 엔진을 대상으로 하여 제공된 성능 데이터로부터 구성품 성능맵을 역생성 하는 방법을 제안하였으며, C++를 이용한 대상 엔진 모델링 결과와 제공된 엔진 성능덱 결과를 비교하여 타당성을 검증하였다.

SIMULINK를 이용한 2-스풀 분리형 배기방식 터보팬 엔진의 구성품 성능맵 생성 및 성능모사에 관한 연구 (Study on Component Map Generation and Performance Simulation of 2-spool Separate Flow Type Turbofan Engine Using SIMULINK)

  • 공창덕;강명철;박광림
    • 한국추진공학회지
    • /
    • 제17권1호
    • /
    • pp.70-79
    • /
    • 2013
  • 본 연구에서는 중형 항공기의 추진 기관인 2 스풀 분리-배기 형식 터보팬 엔진 (BR715-56)의 성능 해석을 수행하기 위하여 상용코드인 MATLAB/SIMULINK를 이용하여 성능모델을 구성하였으며 유량 및 일 조합에 새로운 조합 서브시스템 블록을 새로이 개발하였다. 성능 모사는 먼저 팬, 고압압축기, 고압터빈, 저압터빈 구성품 성능 맵들을 축척방법을 이용하여 유사성능 맵들로 부터 생성하였고, 다음은 탈설계점 성능 해석을 할 수 있도록 구성품들 간 유량과 일 조합이 이루어 질수 있도록 하였다. 제안된 SIMULINK 성능모델은 정상 및 동적 모사와 사용자 편의의 장점을 가지고 있으며, 다양한 작동 조건들에서 개발된 프로그램을 이용한 탈설계점 해석 결과들이 GASTURB에 의한 해석 결과들과 잘 일치함이 확인 되었다.

모바일 옥내위치기반서비스를 위한 도면 출력 서비스 구현 현황 소개 (Current Status of Development of Rendering Drawings Service for Mobile Indoor Location Based Service)

  • 임재걸;레콩탄
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2012년도 춘계학술발표대회
    • /
    • pp.191-194
    • /
    • 2012
  • Rendering maps is an essential feature of the user interface component of a location based service (LBS) system. However, a developer may not too much worry about implementing the rendering maps part of his or her system because there are quite a few publicly available libraries that provide all kinds of functions of manipulating maps. Google Maps, Yahoo Map, Naver Map, Daum Map, and so on are example sites that provide those libraries. Rendering drawings is to indoor LBS as rendering maps is to LBS. However, there is no such thing as Google Maps that provides libraries for rendering drawings. This paper introduces a few web services and a library that is useful in developing user interfaces of indoor LBS systems.

MRQUTER: MapReduce 프레임워크를 이용한 병렬 정성 시간 추론기 (MRQUTER : A Parallel Qualitative Temporal Reasoner Using MapReduce Framework)

  • 김종훈;김인철
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제5권5호
    • /
    • pp.231-242
    • /
    • 2016
  • 빠른 웹 정보의 변화에 잘 대응하기 위해서는, 사실과 지식이 실제로 유효한 시간과 장소들도 함께 표현하고 그들 간의 관계도 추론할 수 있도록 웹 기술의 확장이 필요하다. 본 논문에서는 그동안 소규모 지식 베이스를 이용한 실험실 수준의 정성 시간 추론 연구들에서 벗어나, 웹 스케일의 대규모 지식 베이스를 추론할 수 있는 병렬 정성 시간 추론기인 MRQUTER의 설계와 구현을 소개한다. Hadoop 클러스터 시스템과 MapReduce 병렬 프로그래밍 프레임워크를 이용해 개발된 MRQUTER에서는 정성 시간 추론 과정을 인코딩 및 디코딩 작업, 역 관계 및 동일 관계 추론 작업, 이행 관계 추론 작업, 관계 정제 작업 등 몇 개의 MapReduce 작업으로 나누고, 맵 함수와 리듀스 함수로 구현되는 각각의 단위 추론 작업을 효율화하기 위한 최적화 기술들을 적용하였다. 대규모 벤치마킹 시간 지식 베이스를 이용한 실험을 통해, MRQUTER의 높은 추론 성능과 확장성을 확인하였다.

한강하류지형면의 분류와 지형발달에 대한 연구 (양수리에서 능곡까지)

  • 박노식
    • 동굴
    • /
    • 제68호
    • /
    • pp.23-73
    • /
    • 2005
  • Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(${\pm}100m$). Accordingly, we can recognize the three-parts of erosion surface including the medium level landform surface (500-600m) in this area. (see table 22). In condition with the alluvial surfaces I have classified as two landform surfaces (old and new) which was regarded as one face in past. Meamwhile, under the premise of land use, the synthetic, micro morphological classification based upon the land condition is as per the draw No. 19-1. This is the quite new method of classification which was at first attempted in this country. 2. I have learned that the change of river was most severe at seeing the river meandering rate from Dangjung-ni to Nanjido. As you seee the table and the vertical and horizontal change of river beds is justly proportionable to the river meandering rate. 3. It can be learned at seeing the analysis of component materials of alluvial deposits that the component from each other by areas, however, in the deposits relationship upper stream, and between upper parts and below parts I couldn't always find out the regular ones. 4. Having earthern vessel, shell bone, fossil charcoal and and seaweeds includen in the component materials such as gravel, clay, sand and silt in Dukso and Songpa deposits area. I have become to attempt the compilation of chronicle as yon see in the table 22. 5. In according to hearing of basemen excavation, the bottom set conglomerate beds of Dukso beds of Dukso-beds is 7m and Songpa-beds is 10m. In according to information of dredger it is approx. 20m in the down stream. 6. Making these two beds as the standard beds, I have compared it to other beds. 7 The coarse sand beds which is covering the clay-beds of Dukso-beds and Nanjidobeds is shown the existence of so-called erosion period which formed the gap among the alluvial deposits of stratum. The former has been proved by the sorting, bedding and roundness which was supplied by the main stream and later by the branch stream, respectively. 8. If the clay-beds of Dukeo-bed and Songpa-bed is called as being transgressive overlap, by the Eustatic movement after glacial age, the bottom set conglomerate beds shall be called as being regressive overlap at the holocene. This has the closest relationship with the basin formation movement of Seoul besides the Eustatic movement. 9. The silt-beds which is the main component of deposits of flood plain, is regarded as being deposited at the Holocene in the comb ceramic and plain pottery ages. This has the closest relationship with the change of river course and river beds.

무선인터넷 지도서비스를 위한 매핑 미들웨어의 설계와 구현 (Design and Implementation of a Mapping Middleware for Wireless Internet Map Service)

  • 이양원;박기호
    • Spatial Information Research
    • /
    • 제12권2호
    • /
    • pp.165-179
    • /
    • 2004
  • 무선인터넷의 보급이 확대되면서 GIS 분야에서도 모바일기기를 이용한 애플리케이션과 서비스에 대한 관심이 커져가고 있으며, 한국 무선인터넷 표준화 포럼에서는 무선인터넷을 위한 모바일 플랫폼의 표준과 함께 휴대단말기를 이용한 지도서비스의 기술규격을 제정해오고 있다. 이 연구는 무선인터넷 환경에서 지도서비스를 중개하는 매핑 미들웨어의 선도적 모델을 제시하는 것을 목적으로 하며, 특히 일반 지도서버와의 상호운용에 초점을 둔다. 이 연구에서는 기존의 유선인터넷 환경에서 사용되던 일반 지도서버들을 무선인터넷 환경에 적용하는 방법을 개발하며, 이를 위해 각기 상이한 운용환경을 가진 지도서버들의 요청/응답 구조와 전송 매개변수를 분석함으로써 매핑 미들웨어가 지도서버의 기능을 십분 활용하도록 한다. 이 연구에서 개발한 매핑미들웨어는 .NET 기반의 XML 웹서비스로 구성되며, 이미지 압축을 통한 데이터 경량화 처리모듈과, 단계구분도, 심볼지도, 차트지도, 조건검색지도 등을 위한 지도표현 처리모듈을 포함한다. 이 연구에서 개발한 매핑 미들웨어는 휴대폰이나 PDA와 같은 모바일 클라이언트와 일반 지도서버 사이의 중개역할을 담당하며, .NET클라이언트와 Java 클라이언트 모두를 지원할 수 있다. 또한, 컴포넌트 방식의 상호운용에 의해 기존의 일반 지도서버뿐만 아니라 향후의 무선인터넷 전용 지도서버와도 연동될 수 있는 확장성을 가진다.

  • PDF

고해상도 위성영상의 효율적 지형분류기법 연구 (A Study on Efficient Topography Classification of High Resolution Satelite Image)

  • 임혜영;김황수;최준석;송승호
    • 대한공간정보학회지
    • /
    • 제13권3호
    • /
    • pp.33-40
    • /
    • 2005
  • 위성영상에서 실제 지표면의 형태와 지상물체를 구분하여 분류하는 것은 원격탐사의 중요한 목적중의 하나이다. 다중분광영상을 이용한 분류는 일반적인 토지피복도의 제작에 이용되어지고 있으며 영상분류의 방법에는 많은 이론들이 사용되어지고 있다. 본 연구는 대구 달성군 지역의 IKONOS 영상을 MLC(Maximum Likelihood Classification), ANN(Artificial neural network), SVM(Support Vector Machine), Naive Bayes 분류기법들을 이용하여 각각의 분류정확도를 비교 분석하였다. 또한 PCA/ICA 전처리 과정을 거친 분류기법들 결과와, Boosting 알고리즘 과정을 거친 후의 결과를 비교하였다. 본 연구의 목적은 적절한 전처리과정과 분류기법을 수행함으로써 가장 효율적인 지형분류 방법을 획득하는데 그 목적이 있다.

  • PDF

DADI 기반의 생물다양성정보에 대한 GRM 구축 (Contracture for GRM of Biological Resources Information of based DADI)

  • 이계준;박형선;안부영;양진호
    • 한국정보기술응용학회:학술대회논문집
    • /
    • 한국정보기술응용학회 2002년도 추계공동학술대회 정보환경 변화에 따른 신정보기술 패러다임
    • /
    • pp.479-484
    • /
    • 2002
  • 본 논문에서는 첫째, 생물자원정보 데이터베이스는 크게 생물종 정보 구축과 종정보를 대상으로 구축되어지는 컨텐트(content) 정보로 나눠 XML(eXtensible Markup Language)을 기반으로 데이터베이스화하는 것이다. 둘째, 분류학자들에 의해 정의된 항목과 국제적인 GSD(Global Species Database) 구축의 메타데이터가 되는 항목들을 중심으로 정보가 구축되어야 하며, 효율적인 지역(Local) 정보의 데이터베이스화를 위하여 컴포넌트(Component) 기반의 입력시스템을 구축하여 제공. 셋째, 정보의 서비스 및 공동활용 체제를 구축하기 위하여 DADI(Data Access and Data Interoperability) 기반의 GRM(gobal Road Map)을 구축의 3단계 과정을 통해 생물자원정보에 대한 데이터베이스를 구축하고 원활한 서비스 체제 구축을 위한 연구를 수행하였다.

  • PDF

DADI 기반의 생물다양성정보에 대한 GRM 구축 (Contracture for GRM of Biological Resources Information of based DADI)

  • 이계준;박형선;안부영;양진호
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2002년도 추계공동학술대회
    • /
    • pp.479-484
    • /
    • 2002
  • 본 논문에서는 첫째, 생물자원정보 데이터베이스는 3게 생물종 정보 구축과 종정보를 대상으로 구축되어지는 컨텐트(content) 정보로 나눠 XML(eXtensible Markup Language)을 기반으로 데이터베이스화하는 것이다. 둘째, 분류학자들에 의해 정의된 항목과 국제적인 GSD(Global Species Database) 구축의 메타데이터가 되는 항목들을 중심으로 정보가 구축되어야 하며, 효율적인 지역(Local) 정보의 데이터베이스화를 위하여 컴포넌트(Component) 기반의 입력시스템을 구축하여 제공. 셋째, 정보의 서비스 및 공동활용 체제를 구축하기 위하여 DADI((Data Access and Data Interoperability) 기반의 GRM(Global Road Map)을 구축의 3단계 과정을 통해 생물자원정보에 대한 데이터베이스를 구축하고 원활한 서비스체제 구축을 위한 연구를 수행하였다.

  • PDF