• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7292-7301
• /
• 2014

With the development of IT Info-Communications technology, the vehicle with a combination of wireless-communication technology has resulted in significant research into the convergence of the component of existing traffic with information, electronics and communication technology. Intelligent Vehicle Communication is a Machine-to-Machine (M2M) concept of the Vehicle-to-Vehicle. The Vehicle-to-Infrastructure communication consists of safety and the ease of transportation. Security technologies must precede the effective Intelligent Vehicle Communication Structure, unlike the existing internet environment, where high-speed vehicle communication is with the security threats of a wireless communication environment and can receive unusual vehicle messages. In this paper, the Vehicle Identification number between the V2I and the secure message communication protocol was proposed using hash functions and a time stamp, and the validity of the vehicle was assessed. The proposed system was the performance evaluation section compared to the conventional technique at a rate VPKI aspect showed an approximate 44% reduction. The safety, including authentication, confidentiality, and privacy threats, were analyzed.

• Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.356-360
• /
• 1999

Growth-inhibitory effects of citrus oils and agricultural fungicides, which were on the market, on several molds isolated from putrefied citrus fruits were investigated. When fungicidal activities of 11 kinds of synthetic agrochemicals against 6 species of molds, Alternaria alternata, Rhizopus sp., Botrytis cinerea, Monilia candida, Penicillium italicum and Penicillium digitatum, were investigated, agrochemicals containing mancozeb or fluazinam as an effective component had the broadest fungicidal spectrum. Agrochemicals containing iprodione, benomyl, azoxystrobin or thiophanate were less effective on the molds and those containing conazole derivative were intermediately effective. Resistance of the molds to the agrochemicals were species- and agrochemical-dependent. Among those molds tested, Penicillium italicum and Alternaria alternata showed relatively higher level of survival in the presence of synthetic fungicides. On the other hand, when the molds were exposed to citrus oils by direct contact, no cell could survive regardless of the species. The fungicidal activity of citrus oils was also confirmed by paper disk method and microscopic observation. These results suggested that citrus oils had broad killing activity against molds. Therefore, it would be necessary to design method for the application of citrus oils in order to improve post-harvest storage of citrus fruits.

• Journal of Distribution Science
• /
• v.12 no.11
• /
• pp.67-76
• /
• 2014

Purpose - PB (Private Brand) refers to the product for which the distribution company plans the production independently, consigns the production to the manufacturer, or attaches the self-developed trademark and sells it. To reinforce competitiveness in such a market environment, diverse products development, systematic management activities, and marketing efforts to analyze and understand the consumers' behavior regarding PB products are emphasized. Therefore, this study aims to investigate the relationships among PB product attributes, consumption emotion, brand attitude, and brand loyalty in general supermarkets. First, PB product attributes were defined using the five categories of perceived price, store image, familiarity, perceived service, and perceived quality, based on preceding studies. This study examined the influence of PB product attributes on consumption. Further, this study examined the relation among consumption emotion, brand attitude, and brand loyalty. This study provides more detailed and concentrated strategic implications. Research design, data, and methodology - In this study, the research model was designed to examine the relation among PB product attributes, consumption emotion, brand attitude, and brand loyalty. For the data collection method, the questionnaire survey comprised multiple items for each component and the direct interview method was employed. To collect data, the questionnaire survey was conducted for customers who personally visited the general supermarket after verifying the PB product purchase experience. The questionnaire survey was performed for one month, May 2014. A total of 300 questionnaires were distributed and 240 questionnaires were used for the analysis, excluding the unanswered and insincere questionnaires. The data were analyzed using SPSS ver. 20.0. Results - First, PB product attributes had a significantly positive effect on consumption emotion. The PB product attributes perceived by the customer at the point of service contact are important to form the positive consumption emotion. Second, consumption emotion had a significantly positive effect on brand attitude. Third, the consumption emotion had a significantly positive effect on brand loyalty. Such consumption emotion is an important factor in causing the positive evaluation on the brand attitude perceived by the customer. Fourth, brand attitude had a significantly positive effect on brand loyalty. The consumption emotion was positively represented to invoke the relational continuance behavior. The relational continuance behavior accompanies the repetition of purchase, word of mouth, and recommendation activities, and influences trust regarding the brand, for which the customer maintains the transaction continuously. Conclusions - The PB product attributes perceived by the customer at the point of service contact are important factors to form the positive consumption emotion. Based on this result, the discount store service provider would prepare the measures that can make the customer recognize the positive value, and make more detailed efforts. Consumption emotion is an important factor to cause the positive evaluation on the brand attitude perceived by the customer. Based on this result, the general supermarket must make efforts to provide fun or convenience in the purchase process for consumers.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.27-40
• /
• 2004

The OSGi service platform has several characteristics as in the followings. First, the service is deployed in the form of self-installable component called service bundle. Second, the service is dynamic according to its life-cycle and has interactions with other services. Third, the system resources of a home gateway are restricted. Due to these characteristics of a home gateway, there are a lot of rooms for malicious services can be Installed, and further, the nature of service can be changed. It is possible for those service bundles to influence badly on service gateways and users. However, there is no service bundle authentication mechanism considering those characteristics for the home gateway In this paper, we propose a service bundle authentication mechanism considering those characteristics for the home gateway environment. We design the mechanism for sharing a key which transports a service bundle safely in bootstrapping step that recognize and initialize equipments. And we propose the service bundle authentication mechanism based on MAC that use a shared secret created in bootstrapping step. Also we verify the safety of key sharing mechanism and service bundle authentication mechanism using a BAN Logic. This service bundle authentication mechanism Is more efficient than PKI-based service bundle authentication mechanism or RSH protocol in the service platform which has restricted resources such as storage spaces and operations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.43-50
• /
• 2012

The Green Infrastructure Framework refers to an interconnected network formed by greenways that links gardens, parks, green spaces, streams, wetlands, agricultural lands, and green belts. Green infrastructure supports diverse functions to environment, provides various benefits to people, and helps in the community's health and viability. It can store stormwater runoff and abate its non-point source pollutants. Due to its advantages and profits, advanced countries in environment policies have adopted green infrastructure in planning and implementing urban and regional development. The Korean government and municipalities have focused upon grey infrastructure investment in the past, which causes occurrence of natural disasters such as draught, flood, and landslides, degradation of water and air quality, decline of biodiversity, and even inhibition of economic activities. In order to alleviate these problems, it is requested to formulate and implement policies for green infrastructure at the national government level. USA and Korean situation of green infrastructure were investigated; forty components of green infrastructure were drawn. Nine policies utilized in the USA cases were identified, which are applicable to Korea. Among them, five policies can be implemented in public sector and four in private one. The green infrastructure law needed in Korea was suggested. The amendments of laws regarding green infrastructure and alternatives expending it were proposed.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.147-154
• /
• 2006

The certificate status validation mechanism is a critical component of a public key infrastructure based on certificate system. The most generally mechanisms used these days are the use of the certificate revocation list and the real-time certificate status protocol. But the certificate revocation list can not give the real-time certificate status because the certificate is being delivered periodically, and the real-time certificate status protocol method will generate a concentrated load to the server because the protocol in the central server will be accessed whenever a certification is necessary. It will also take a long time to validate the certificate because each trade has to send mass information through the network. This paper will present that real-time validation is guaranteed as the real-time certificate status protocol method and the traffic congestion in the network Is reduced in a way that the certification would be requested using the user information hash value and would be validated using the user information kept in the certification authorities and the service providers. Based on the this study, we suggest a real-time certificate status validation mechanism which can reduce the certificate status validation time using the signed user information hash value. And we confirm speed of certificate status verification faster than existing CRL(Certificate Revocation List) and OCSP(Online Certificate Status Protocol) method by test.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.1
• /
• pp.113-122
• /
• 1999

The importance of the vertical response of a structure was well recognized after the Hyogoken-Nanbu earthquake of Japan. However, most of the seismic design codes does not specified the site sail profiles, and the sail and foundations conditions were mostly neglected in the vertical seismic analyses of a structure. In this paper, the effects of foundation size, sail layer depth under the foundation, foundation embedment and pile foundation on the vertical seismic response spectra for both surface and embedded mat foundation were studied to investigate the effects of the soft soil layer on the vertical response of a structure excited with the vertical components of Taft and El Centro earthquakes, considering the sail profile types of $S_A,S_C,S_E$ in UBC-97, the medium and large size foundations, the soil layer depth under the foundation of 30 and 60m, the foundation embedment of 0 and 15m, and the precast reinforced concrete bearing piles installed in the soft soil deposit. According to the study results, the foundation size has a little effect on the vertical seismic response, However, the soil layer depth under the foundation of 60m has to be considered for the vertical seismic analysis of a structure as for the horizontal one. The embedded pile foundations as well as the surface ones built on the soft soil layer amplified the vertical seismic response of a structure very much.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.27-37
• /
• 1999

A CMOS ReadOut Integrated Circuit (ROlC) for InfraRed Focal Plane Array (IRFPA) detector is presented, which is a key component in uncooled thermal imaging systems. The ROIC reads out signals from $64\times64$ Barium Strontium Titanate (BST) infrared detector array, then outputs pixel signals sequentially after amplifying and noise filtering. Various design requirements and constraints have been considered including impedance matching, low noise, low power dissipation and small detector pitch. For impedance matching between detector and pre~amplifier, a new circuit based on MOS diode structure is devised, which can be easily implemented using standard CMOS process. Also, tunable low pass filter with single~pole is used to suppress high frequency noise. In additions, a clamping circuit is adopted to enhance the signal~to-noise ratio of the readout output signals. The $64\times64$ IRFPA ROIC is designed using $0.65-\mu\textrm{m}$ 2P3M (double poly, tripple metal) N~Well CMOS process. The core part of the chip contains 62,000 devices including transistors, capacitors and resistors on an area of about $6.3-mm\times6.7-mm$.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2006

In 2006, the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) plans to undertake (subject to receiving the necessary approvals) a Pilot program for $CO_2$ storage within a depleted gas reservoir. The Otway Basin Pilot Program (OBPP) aims to demonstrate that subsurface $CO_2$ storage is both economically and environmentally sustainable in Australia. This will be the first $CO_2$ storage program in the world to utilise a depleted gas reservoir and, hence, the experience gained will be a valuable addition to the range of international $CO_2$ storage programs that are underway or being planned. A key component of the OBPP is the design of an appropriate geophysical monitoring strategy that will allow the subsurface migration of the $CO_2$ plume to be tracked and to verify that containment has been successful. This paper presents the results from modelling the predicted gravity response to $CO_2$ injection into the Otway Basin reservoir, where the goal was to determine minimum volumes of $CO_2$ that may be detectable using non-seismic geophysical techniques. Modelling results indicate that gravity measurements at 10 m spacing within the existing observation well and the planned $CO_2$ injection well would provide excellent vertical resolution, even for the smallest $CO_2$ volume modelled (10000 tonnes), but resolving the lateral extent of the plume would not be possible without additional wells at closer spacing.