• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.6
• /
• pp.103-111
• /
• 1995

Drought index calculation based on the principal hydrological parameters, such as rainfall and reservoir storage, can estimate the duration and intensity of drought in irrigation reservoirs. It is difficult to build up a drought criteria since the conditions change variously by the reliability of rainfall. Because of the increasing water demands, it is urgent to prepare a generalized positive countermeasure to overcome drought. Water demands can at calculated but the estimation of drought characteristics, and the effective water management method can be established. The purpose of this study is to obtain a drought index and build up a data-base on the reservoir basins for establishing the fundamental hydrological data-base. This Index can observe the behavior of the WSI(Water Supply Index) and the component indices. The results summarized through this study are as follows. 1. WSI value of zero does not correspond to 100% in average due to the skewness in the probability distributions. 2. WSI is not a linear index; that is, given change in terms of water volume or percentage of average does not result in a proportional change on the WSI scale. 3. WSI is not always between the reservoir and the rainfall index in magnitude. This is only true if the component indices are of opposite sign. If they are of the same sign, the SWSI will often have a mangitude greater than either of the component indices. This is easily understood, because the concurrence of extreme values of the same sign for the two components is rarer than the occurrence of extreme values for either of the two components individually.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.211-235
• /
• 2004

Component based design is perceived as a key technology for developing advanced real-time systems in a both cost- and time effective manner. Already today, component based design is seen to increase software productivity, by reducing the amount of effort needed to update and maintain systems, by packaging solutions for re-use, and easing distribution. Nowdays, a thousand and one companies in If(Information Technology) industry such as Sl(System Integration) and software development companies, regardless of scale of their projects, has spent their time and endeavor on developing reusable business logic. The component software is the outcome of software developers effort on overcoming this problem; the component software is the way propositioned for quick and easy implementation of software. In addition, there has been lots of investment on researching and developing the software development methodology and leading If companies has released new standard technologies to help with component development. For instance, COM(Component Object Model) and DCOM(Distribute COM) technology of Microsoft and EJB(Enterprise Java Beans) technology of Sun Microsystems has turned up. Component-Based Development (CBD) has not redeemed its promises of reuse and flexibility. Reuse is inhibited due to problems such as component retrieval, architectural mismatch, and application specificness. Component-based systems are flexible in the sense that components can be replaced and fine-tuned, but only under the assumption that the software architecture remains stable during the system's lifetime. In this paper, It suggest that systems composed of components should be generated from functional and nonfunctional requirements rather than being composed out of existing or newly developed components. about implements and accomplishes the modeling for the Product Control component development by applying CCD(Contract-Collaboration Diagram), one of component development methodology, to MRP(Material Requirement Planning) System

• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.159-163
• /
• 2001

Five yellow disperse dyes were synthesized and their dyeing, fastness and photodegradation behaviors were investigated. It was found that dyes derived from phenylindole and N-alkylaminobenzene showed dye uptake directly proportional to the dye concentration, but the build-up of dyes derived from carbazole and pyridone were not good. The wavelength at maximum absorption. molar extinction coefficient. and the tendency to the photodegradation were strongly dependent on the electron donating ability of the coupling component. The dye, whose coupling component was phenylindole, possessed the excellent dyeing properties and the high degree of lightfastness. UVA had an effect on the inhibition of the photodegradation especially for the easily photodegradabte dyes.

• Journal of Korean Society for Quality Management
• /
• v.25 no.3
• /
• pp.96-107
• /
• 1997

The recent stream to reliability prediction is that it is totally inclusive in depth to consider even the operating and environmental condition at the level of finished goods as well as component itselves. In this study, firstly we present the reliability prediction methods by entire failure rate model which failure rate at the system level is added to the failure rate model at the component level. Secondly we build up the improved bases of reliability demonstration through a, pp.ication of Kaplan-Meier, Cumulative hazard, Johnson's methods as non-parametric and Maximum Likelihood Estimator under exponential & Weibull distribution as parametric. And also present the methods of curve fitting to piecewise failure rate under Weibull distribution, PRST (Probability Ratio Sequential Test), curve fitting to S-shaped reliability growth curve, computer programs of each methods. Lastly we show the practical for determination of optimal burn-in time as a method of reliability enhancement, and also verify the practical usefulness of the above study through the a, pp.ication of failure and test data during 1 year.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.466-468
• /
• 2002

In order to newly define and specify the performance and the testing method of the high-voltage circuit breaker, IEC 62271-100 was published in May, 2001 and took place of IEC 60056 which had been used since 1987. This new standard intensifies the requirement and the test method of the circuit breaker and also domestic manufacturer makes progress the new product development. And, KERI also goes on the build-up project of short-circuit testing facilities for fulfilling the testing method requirements in new IEC 62271-100. This paper introduce the limiting method of short-circuit making current by controlling the time constant of dc component.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1478-1480
• /
• 1999

The accurate analysis of power system requires detailed load model. There are two basic approaches in modeling the load characteristics. One is to directly measure the voltage and frequency sensitivity of the load P and Q at substations and feeders. The other is to build up a composite load model from each load component. Each of these methods has advantages and disadvantages. This paper presents load composition for KEPCO's power system to develop load models by the component-based load modeling.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1089-1092
• /
• 1999

Applications using 3D models are increasing recently. Since 3D polygonal models are structured by a triangular mesh, the coding of polygonal models in strips of triangles is an efficient way of representing the data. These strips may be very long, and may take a long time to render or transmit. If the triangle strips are partitioned, it may be possible to perform more efficient data transmission in an error-prone environment and to display the 3D model progressively. In this paper, we devised the Component Based Data Partitioning (CODAP) which is based on Topological Surgery (TS). In order to support the error resilience and the progressively build-up rendering, we partition the connectivity, geometry, and properties of a 3D polygonal model. Each partitioned component is independently encoded and resynchronization between partitioned components is done.

• KIEAE Journal
• /
• v.1 no.1
• /
• pp.27-33
• /
• 2001

There are many research Papers and experiments indicating that the geomagnetic field affects the people and living organism. People grow up and build up most of their character through living in dwelling space and have relax and refresh at home. Creating healthy dwelling space is being considered very important in architectural planning and design for providing comfortable living environment and improving quality of life. Therefore. it is necessary to investigate the geomagnetic field and people's response in living space. In this study the vertical component(Z value) of geomagnetic field in detached houses was measured, evaluated by related evaluation criteria, compared with interview survey.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.841-846
• /
• 1998

The superconducting permanent current switch (PCS) is an important component to build MRI system. This switch uses a thermal and / or magnetic super-to-normal phase transition of the superconductor. Unfortunately, in the past it was not designed for using in line frequency. We made some superconducting power electronics devices operating up to 100 Hz [1]. The results of development and preliminary studying of the hear controlled S-PED up to line frequency are presented.

• Progress in Medical Physics
• /
• v.28 no.1
• /
• pp.33-38
• /
• 2017

Creating individualized build-up material for superficial photon beam radiation therapy at irregular surface is complex with rice or commonly used flat shape bolus. In this study, we implemented a workflow using 3D printed patient specific bolus and describe our clinical experience. To provide better fitted build-up to irregular surface, the 3D printing technique was used. The PolyLactic Acid (PLA) which processed with nontoxic plant component was used for 3D printer filament material for clinical usage. The 3D printed bolus was designed using virtual bolus structure delineated on patient CT images. Dose distributions were generated from treatment plan for bolus assigned uniform relative electron density and bolus using relative electron density from CT image and compared to evaluate the inhomogeneity effect of bolus material. Pretreatment QA is performed to verify the relative electron density applied to bolus structure by gamma analysis. As an in-vivo dosimetry, Optically Stimulated Luminescent Dosimeters (OSLD) are used to measure the skin dose. The plan comparison result shows that discrepancies between the virtual bolus plan and printed bolus plan are negligible. (0.3% maximum dose difference and 0.2% mean dose difference). The dose distribution is evaluated with gamma method (2%, 2 mm) at the center of GTV and the passing rate was 99.6%. The OSLD measurement shows 0.3% to 2.1% higher than expected dose at patient treatment lesion. In this study, we treated Mycosis fungoides patient with patient specific bolus using 3D printing technique. The accuracy of treatment plan was verified by pretreatment QA and in-vivo dosimetry. The QA results and 4 month follow up result shows the radiation treatment using 3D printing bolus is feasible to treat irregular patient skin.