• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.79-84
• /
• 1983

The test specimen, designated the double cantilever beam, was employed for a fracture mechanics study of stress corrosion cracking (SCC) of type 5083 Al-alloy in seawater. Stress intensities for this DCB specimen were calculated by using compliance, strain energy release rate and relation between stress intensity and strain energy release rate. Analytical expression for compliance as a function of crack length was obtained by applying beam theory. It was investigated that the polarization potentials affected the growth rate and surface of stress corrosion cracking. The results are as follows, The critical stress intensity was 134.81-148.38kg/mm super(3/2) and K sub(Ii) under polarization potentials was 75.92-145.78kg/mm super(3/2). The minimum stress corrosion crack growth rate was occurred at-987mV SCE. Insoluble compound on $\beta$ phase was looked into through SCC. The greater anodic potential is, the larger insoluble compound on $\beta$ phase becomes.

• Pediatric Infection and Vaccine
• /
• v.22 no.3
• /
• pp.186-193
• /
• 2015

Purpose: The aim of study was to estimate the hand hygiene (HH) compliance of healthcare workers (HCWs) in a children's hospital. Methods: This study was conducted in a hospital which is a tertiary and educational children's hospital with 313 beds and 533 HCWs. Data were collected by direct observation methods from November 1, 2010 to December 31, 2010. Results: A total of 2,999 opportunities for HH were observed, and the overall HH rate was 95.3%. HH rate of the registered nurse, physicians and transferer was 97.7%, 89.2%, and 72.1%, respectively (P<0.001). Among physicians, HH rate of the fellows, professors, residents and interns was 97.5%, 93.9%, 89.7%, and 80.9%, respectively (P<0.001). HH rate in the emergency room, operation room, outpatient department (OPD), and the intensive care unit (ICU) was 97.2%, 97.2%, 95.4%, and 92.5%, respectively (P<0.001). Hand rubbing was the most frequently used (81.1%), and hand washing was frequently used in the case of 'after body fluids exposure risk' (37.7%) and 'after touching patient surroundings' (28.5%). HH methods were not statistically different from each departments (P =0.083), however, they were significantly different according to the World Health Organization (WHO) 5 Moments (P<0.001). Distributions in WHO 5 Moments by the job titles were significantly different (P<0.001). The odds ratio of physicians, ICU and OPD was 0.353 (95% CI, 0.241-0.519), 0.291 (95% CI, 0.174-0.487), and 0.484 (95% CI, 0.281-0.834), respectively. Conclusions: Compliance of HH was different by the job titles and departments. Effective custom-tailored HH programs for each job title and department need to be developed.

• Coupled systems mechanics
• /
• v.12 no.1
• /
• pp.69-81
• /
• 2023

This paper considers a delamination analysis of a statically undetermined inhomogeneous beam structure of rectangular section with viscoelastic behavior under torsion. The beam is built in at its two ends. The beam has two longitudinal inhomogeneous layers with a delamination crack between them. A notch is made in the upper crack arm. The external torsion moment applied on the beam is a function of time. Under these conditions, the beam has one degree of indeterminacy. In order to derive the strain energy release rate, first, the static indeterminacy is resolved. Then the strain energy release rate is obtained by analyzing the balance of the energy with considering the viscoelastic behavior. The strain energy release rate is found also by analyzing the compliance of the beam for checkup. Solution of the strain energy release rate in a beam without a notch in the upper crack arm is derived too. In this case, the beam has two degrees of static indeterminacy (the torsion moment in the upper crack arm is treated as an additional internal redundant unknown). A parametric investigation of the strain energy release rate is carried-out.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.18 no.1
• /
• pp.17-22
• /
• 2015

Purpose: This study aims to investigate Saccharomyces boulardii CNCM I-745 during Helicobacter pylori eradication in children. Methods: One hundred ninety-four H. pylori positive children were randomized in two groups. Therapy (omeprazole+ clarithromycin+amoxicillin or omeprazole+clarithromycin+metronidazole in case of penicillin allergy) was given to both groups during two weeks. In the treatment group (n: 102) S. boulardii was added to the triple therapy, while the control group (n: 92) only received triple therapy. The incidence, onset, duration and severity of diarrhea and compliance to the eradication treatment were compared. A $^{13}C$ urea breath test was done 4 weeks after the end of eradication therapy in two groups of 21 patients aged 12 years and older to test the H. pylori eradication rate. Results: In the treatment group, diarrhea occurred in 12 cases (11.76%), starting after $6.25{\pm}1.24days$, lasting $3.17{\pm}1.08days$, and compliance to eradication treatment was 100%. In the control group, diarrhea occurred in 26 cases (28.26%), starting after $4.05{\pm}1.11days$, lasting $4.02{\pm}0.87days$, and in six cases eradication treatment was stopped prematurely (p<0.05). The $^{13}C$ urea breath test showed successful H. pylori eradication in 71.4% of the patients in the treatment and in 61.9 % in the control group (not significant). Conclusion: S. boulardii has a beneficial effect on the prevention and treatment of diarrhea during H. pylori eradication in children. Although S. boulardii did only slightly increase H. pylori eradication rate, compliance to eradication treatment was improved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2174-2183
• /
• 2000

In this paper, the evaluation method of interfacial fracture toughness to apply the fracture toughness was investigated in adhesively bonded joints of AI/Ced./A1. Four types of adhesively bonded double-cantilever beam(DCB) joints with the interface crack were prepared for the test of interfacial fracture toughness. The experiments to measure the interfacial fracture toughness were performed under the various mixed-mode conditions. The critical energy release rate, Gc, was obtained by the experimental measurement of compliances. From the experimental results, the interfacial fracture toughness for the mixed-mode specimens is well characterized by the energy release rate, and the method of strength evaluation by the interfacial fracture toughness was discussed in adhesively bonded joints.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.2
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.670-675
• /
• 2004

Since the bitter taste of enrofloxacin apparently limit the patient compliance in the oral formulations of the antibacterial agent, the masking of the taste is essential for the improvement of the therapeutic effectiveness. Therefore, this study was carried out to examine the feasibility of taste masking of enrofloxacin by the retardation of its dissolution rate using the formation of complex between the drug and Carbopol. The complexation between Carbopol and enrofloxacin was confirmed by turbidity, UV spectrophotometry, wide angle X-ray diffraction, and differential scanning calorimetry. The enrofloxacin content in the complexes was 34％ （Carbo-enrofloxacin complex I） and 57％ （Carbo-enrofloxacin complex II） depending on the prepara-tion method. The dissolution rate of enrofloxacin from the complex increased as the pH was reduced. The dissolution rate of enrofloxacin from the Carbo-enrofloxacin complex I was significantly lower than that of the enrofloxacin powder. Therefore, these observations suggest that Carbo-enrofloxacin complex I can be used to mask the taste of enrofloxacin.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Journal of Korean Public Health Nursing
• /
• v.2 no.2
• /
• pp.45-61
• /
• 1988

Clonorchiasis should be realized as an important public health problems in Korea by their wide distribution, high prevalence rate and heavy infection intensity. This study was designed to obtain the infection rate, contributing factors as well as the behavior of infected persons among the factory workers in Pohang area where that parasite still remains as a problem. Study was undertaken from September '86 to October '87. Clonorchiasis skin test was performed for 3180 factory workers, and stools of skin test positive reactors were examined. Praziquantel was prescribed to stool examination positive persons for clonorchis sinensis ova. After one year. stool examination was repeated for them who received medicine. At the same time. a structured questionnaire was given and the results were analyzed and compared with control group. The results of this study are summarized as follows; 1. The infection rate of Clonorchis sinensis. 1) Clonorchiassis skin test positive rate was $26.2\%$ (834/3180). 2) Stool(Clonorchis sinensis ova) positive rate among skin test positive reactors was $21.6\%$ (129/598) All 129 infected persons were male. 2. Contributing factors of Clonorchis sinensis infection. 1) The chance of infection was higher in low-educated peple(p<0.01) 2) Stool(Clonorchis sinensis ova)positive rate was higher among the persons who reside near the riverside now(p<0.01), or among the persons who long history of riverside residence(p<0.01) 3) The infection rate was higher in thoes who like sliced raw fresh water fishes than in those who like cooked fishes(p<0.05). 4) Correct answering rate for questions about the cause and route of Clonorchis sinensis infection was low in infected persons. 5) The infection rate was lower among those who had experience of previous clonorchiasis test(p<0.01). 6) Family members of infected persons show higher rates of infection(p <0.01). 3. Treatment effect and compliance of infected person to treatment. 1) After one year, negative stool conversion rate was $85.4\%$. 2) $70.8\%$ of infected persons took the medicine; Only $3.1\%$ of them consulted to physician to know the medication effect; As many as $29.4\%$ of them continued to consume raw fresh water fishes. As a conclusion, City of Pohang area, Hyung San River in the center, is an endemic area of clonorchiasis. Current clonorchiasis control system seemed to be ineffective; many of the skin test positive group did not submitted their stool for examination; only $70.8\%$ of infected persons took the medicine even though the drugs were given free of charge; $29.4\%$ continued to consume raw fresh water fishes after taking medicine. Therefore. proper education program should be provided to improve the compliance to treatment. Follow-up for infected cases is mandatory to prevent waste of restricted budget.

• Journal of the Korea Convergence Society
• /
• v.5 no.4
• /
• pp.137-146
• /
• 2014

This study investigated the effects of response prompting through 3-steps compliance training to reaction time for child with Asperger's syndrome(AS). The participant was 3 and 8 year-old boy who was diagnostic As with non-compliant, delayed receptive language. Study design was multiple-baseline across behaviors. Target Behaviors were hands-up, following direction, and answering behavior. Dependent variable was latency reaction time during compliance training. This results mean that reaction time was increased raise hands-up behavior, compliance behavior and response ask questions. During intervention, the participant improve the rate on-task behavior as well as reduce off-task behaviors.