• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.23-29
• /
• 2016

Effects of cationic polyvinylamine (PVAm) dry strength agent on effectiveness of optical brightening agent (OBA) during fine papermaking and the mechanism for brightness reduction of paper by PVAm was investigated by UV/Vis spectroscopy and turbidity measurement of OBA solution with PVAm. It was shown that PVAm reduced brightness of paper while opacity was not varied and tensile strength of paper was increased. Tetra-type OBA solution showed the peaks around the wavelength of 280 nm and 330 nm and the increase in the OBA concentration increased the UV absorbance in all wavelength. Addition of PVAm into the OBA solution decreased the UV absorbance at 280 nm. Turbidities of OBA and PVAm solutions were close to zero, respectively, while the turbidity value increased for the mixed solution of OBA and PVAm in various mixing ratios and the highest value was obtained when the mixing ratio of PVAm and OBA was 5:5, meaning that cationic PVAm formed complex with anionic OBA. In conclusion, cationic PVAm could form a complex with anionic OBA and that reduced UV absorbance, resulting in the reduced brightness of paper.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.483-486
• /
• 2000

A method is described for the fluorimetric determination of nickel, based on the formation of $Ni(II)-\alpha-(2-Benzimidazolyl)-\alpha'$, $\alpha''$ -(N-5-Nitro-2-Pyridylhydrazone)-toluene complex in the presence of a non-ionic surfactant. The complex has practically no fluorescence in the absence of surfactant, but the addition of Triton X-100 makes possible the fluorimetric determination of low concentrations of Ni(II) as it enhances the fluorescenceintensity of the complex by up to about 5-fold. This method is very sensitive and selectrive for the direct determination of nickel ion. The optimum conditions are a Triton X-100 concentration of 2.0 mL(5.0%, v/v) and pH $9.0\pm0.2(ammonium$ chloride-ammonia buffer). The fluorescence is measured at 337 nm of emission wavelength under 300 nm of excitation wavelength. The fluorescence intensity is a linear function of the concentration of Ni(II) in the range 5-70 ng/mL, and the detection limit is 2.0 nm/mL. The proposed method has been successfully applied to the determination of trace amounts of Ni(II) in food and human hair samples.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.616-619
• /
• 2003

Photochemical and photothermal effects have correlation with each other and depend on laser wavelength. Multi-scanning laser ablation process of polymer with DPSS(Diode Pumped Solid State) 3rd harmonic Nd:YVO$_4$ laser with wavelength of 355nm is applied to fabricate three-dimensional micro shape. The DPSSL photomachining system can rapidly and cheaply fabricate 2D pattern or 3D shape with high efficiency because we only use CAD/CAM software and precision stages instead of complex projection mask. Photomachinability of polymer is highly influenced by laser wavelength and its own chemical structure. So the optical characteristics of polymers for 355nm laser source is investigated by experimentally and theoretically.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.14-18
• /
• 1992

A gradient matrix method in conjunction with the transmission-reflection method to determine the complex permittivity and permeability of a microwave material is presented. This method does not incur the phase ambiguity due to an improper sample length, and is applicable to the measurement of low-loss materials of a half wavelength. A gradient matrix for a coaxial cable sample is derived, and the results are illustrated.

• Textile Coloration and Finishing
• /
• v.3 no.3
• /
• pp.29-33
• /
• 1991

Some ir absorbing nickel complex dyes were synthesized by the reaction of phenylene diamines, 2-aminobenzenethiols and 2-aminobenzene selenols, tetrathiols with nickel (II) chloride. These dyes absorbed ir light, but those from phenylene diamines absorbed at 780-800 nm which is the most favorable wavelength region for semiconductor laser optical recording dye medium.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.328-329
• /
• 2009

This paper presents the effect of organic Ag complex sintering temperature on the MEH-PPV photoluminescence (PL) properties. MEH-PPV and organic Ag complex was coated on the glass substrate by spin coating method. The coated Ag complex was sintered in an air atmosphere. The sintering temperature was varied from 100 to $200^{\circ}C$ and sintering time was 5 min. The Ag film sintered at temperature higher than $120^{\circ}C$ shows very low sheet resistance less than $0.5\;{\Omega}{/\square}$. The coated MEH-PPV measure photoluminescence (PL) intensity at 580 nm. The PL peak was shifted to the higher wavelength with increasing the sintering temperature.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1090-1094
• /
• 2000

A reaction between germanium (Ge) and the ligand, o-chlorophenylfluorone (o-CPF) has been carried out. The reaction sensitive at pH 4.5 in the presence of triton x-100 was selective in the presence of EDTA. The spectral correction technique was ap plied to the analysis of the reaction instead of single wavelength spectrophotometry because the absorption of excess of o-CPF was not negligible. An updated determination of the properties of the Ge(IV)-o-CPF complex is given, which involved the complex ratio, stepwise absorptivity and stability constant of the complex. In present work, the results show that the complex $Ge(o-CPF)_3was$ formed and its cumulative stability constant was 1.09 ${\times}$1016 . For sample analysis, the detection limit of germanium was 0.01 mg/L, and the recoveries were between 96.4% and 102%, with relative standard deviations of less than 6.5%.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.2
• /
• pp.100-106
• /
• 2012

The aim of this work was to reveal the effect of butanoic acid in its dissociated form and undissociated form as a guest molecule on the kinetic parameters in an inclusion reaction with ${\beta}$-cyclodextrin (${\beta}$-CD). Ultrasonic absorption measurements in the frequency range from 0.2 to 45 MHz were carried out for ${\beta}$-CD solutions with butanoic acid at $25^{\circ}C$ by ultrasonic relaxation method. The rate and the equilibrium constants were obtained from the guest concentration dependence of the relaxation frequency, and the standard volume change of the complexation reaction were obtained from the maximum absorption per wavelength. A single relaxational absorption was observed, and the cause of the relaxation was attributed to a perturbation of the chemical equilibrium associated with a complexation reaction between ${\beta}$-CD and butanoic acid. These results were compared with those in solutions containing both ${\beta}$-CD and different guest molecules. It was found that the hydrophobicity of guest molecules played an important role in the formation of the inclusion complex and also that the charge on the carboxylic group had a considerable effect on the kinetic characteristics of the complexation reaction.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1026-1030
• /
• 2009

A novel Schiff base ligand (N, O system) 5-methoxy-2-phenyliminomethylphenol ($5-CH_3O-PMP$) was synthesized. Using the synthesized ligand as a fluorescent reagent, a fluorometric method was developed for the quantitative analysis of Al(III) ion. The quantitative analysis of Al(III) ion was performed by making the complex compound between Al(III) ion and $5-CH_3O-PMP$ in ethanol-water solution (85/15, v/v, pH 6.2). The excitation wavelength (${\lambda}em$) of the complex compound was 397 nm while the emmision wavelength (${\lambda}em$) was 498 nm. The quantitative analysis of Al(III) ion was carried out by estimating the fluorescence intensity. The various calibration curves were used for the quantitative analysis in the range of 0.27$\sim$27 ng/mL Al(III) ion concentrations. The detection limit was 0.027 ng/mL. Using the fluorometric method developed in this study, satisfying results were obtained from various samples such as tap water, hot spring water, river water, sea water and waste water, which contained considerable amounts of interfering ions.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.56-65
• /
• 2007

The effect of gain dispersion on the self-pulsation (SP) characteristics due to the mode beating of two modes emitted in a multisection DFB laser composed of two complex-coupled DFB sections and a phase control section is investigated. When the peak wavelength, ${\lambda}_{p}$, of the gain spectrum of the DFB section is positioned in the center of the lasing wavelengths or the Bragg wavelengths of the two DFB sections, the maximum SP frequencies are higher and the modulation index has better characteristics compared to those cases for ${\lambda}_{p}$ fixed at the lasing wavelength or Bragg wavelength of one DFB section, when the difference between the Bragg wavelengths of the two DFB sections, ${\Dalta}{\lambda}_{B}$, is varied. When ${\lambda}_{p}$ is positioned in the renter of the Bragg wavelengths of the two DFB sections, the maximum SP frequency is higher and of the modulation index has better characteristics compared to those of the case for ${\lambda}_{p}$ positioned in the center of the lasing wavelengths of the two DFB sections.