• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.452-455
• /
• 2002

We demonstrate the wide-viewing characteristics of a twisted nematic liquid crystal display (LCD) with self-formed micro-domains through the topographical alignment and fringe field effects of dielectric surface gratings (DSG). The mutual optical compensation between micro-domains within each pixel eliminates the contrast inversion phenomenon of TN mode without complex surface treatments.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.195-195
• /
• 2014

탄화규소(SiC)의 복합체는 고온강도, 내식성, 내마모성, 내화학 특성, 열충격성 및 기계적 특성이 우수하며 제조공정으로 CVD 공정은 많이 연구되어져 있으나 비교적 간단한 구조로 우수한 특성을 얻을 수 Si 증발입자 확산방법에 대한 체계적인 연구가 수행되고 있지 않다. 본 논문에서는 Si 증발입자가 탄소표면에서 확산 반응으로 형성되는 SiC 복합체에 대한 검토 및 연구 개발 동향을 기술한다.

• 대한수학회지
• /
• 제58권2호
• /
• pp.419-437
• /
• 2021

We prove that every minimal symplectic filling of the link of a quotient surface singularity can be obtained from its minimal resolution by applying a sequence of rational blow-downs and symplectic antiflips. We present an explicit algorithm inspired by the minimal model program for complex 3-dimensional algebraic varieties.

• 대한수학회지
• /
• 제60권1호
• /
• pp.71-90
• /
• 2023

We construct generalized Cauchy-Riemann equations of the first order for a pair of two ℝ-valued functions to deform a minimal graph in ℝ³ to the one parameter family of the two dimensional minimal graphs in ℝ⁴. We construct the two parameter family of minimal graphs in ℝ⁴, which include catenoids, helicoids, planes in ℝ³, and complex logarithmic graphs in ℂ². We present higher codimensional generalizations of Scherk's periodic minimal surfaces.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.275-286
• /
• 2002

Statement of problem. Surface alteration of the implant screws after function may be associated with mechanical failure. Theses metal fatigue appears to be the most common cause of structural failure. Purpose. The purpose of this study was to evaluate surface alteration of the implant screws after function through the examination of used and unused implant screws in SEM(scanning electron microscope). Materials and methods. In this study, abutment screws(Steri-oss, 3i), gold retaining screw(3i) and titanium retaining screw(3i) were retrieved from patients. New, unused abutment and retaining screws were prepared for control group. Each of the old, used screws was retrieved with a screwdriver. And retrieved implant complex of Steri-oss system was prepared for this study. Then, SEM investigation and EDS analysis of abutment and retaining screws were performed. And SEM investigation of cross-sectioned sample of retrieved implant complex was performed. Results. In the case of new, unused implant screws, as maunfactured circumferential grooves are regularly examined and screw thread are sharply remained. Before ultrasonic cleansing of old, used implant screw, a lot of accumulation and corrosion products were existed. After ultrasonic cleansing of old, used implant screws, circumferential grooves as examined before function were randomly deepened and scratches increased. Also, dull screw thread was examined. More surface alterations after function were examined in titanium screw than gold screw. And more surface alteration was examined when retrieved with driver than retrieved without driver. Conclusions. These surface alteration after function may result in the screw instability. Regularly cleansing and exchange of screws was recommended. We recommend the use of gold screw rather than titanium screw, and careful manipulation of the driver.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.310-320
• /
• 2007

Statement of the problem. The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured acrylic resin using glass fibers, have been suggested over the years. But problems such as poor workability, rough surface, poor adhesion of glass fiber resin complex are not solved yet. Purpose. The aim of the present study was to investigate the effect of short glass fibers on the transverse strength of heat-polymerized denture base acrylic resin and roughness of resin complex after abrasion test. Material and methods. To avoid fiber bunching and achieve even fiber distribution, glass fiber bundles were mixed with acrylic resin powder in conventional mixer with a non-cutting blade, to produce the glass fiber($10{\mu}m$ diameter, 3mm length, silane treated) resin composite. Glass fibers were incorporated at 0%, 3%, 6% and 9% by weight. Transverse strength were measured. After abrasion test, surface roughness was evaluated and scanning electron microscope view was taken for clinical application. Results. 1. 6% and 9% incorporation of 3mm glass fibers in the acrylic resin enhanced the transverse strength of the test specimens(p<0.05). 2. Before abrasion test, incorporation of 0%, 3%, 9% glass fiber in the resin showed no dirrerence in roughness statisticaly(p>0.05). 3. After abrasion test, incorporation of 0%, 3%, 6% glass fiber in the resin showed same surface roughness value statistically(p>0.05). 4. In SEM, surface roughness increased as the percentage of the fibers increased. 5. In the areas where glass fiber bunchings are formated, a remarkably high roughness was noticed. Conclusion. 6% and 9% addition of silane-treated short glass fibers into denture base acrylic resin increased transverse strength significantly. Before and after abrasion test, incorporation of 0%, 3%, 6% glass fiber in the resin showed same surface roughness value statistically.

• 한국축산식품학회지
• /
• 제34권5호
• /
• pp.576-581
• /
• 2014

Sodium chloride is an important ingredient added to most of foods which contributes to flavor enhancement and food preservation but excess intake of sodium chloride may also cause various diseases such as heart diseases, osteoporosis and so on. Therefore, this study was carried out to investigate the effect of monosodium glutamate (MSG) as a salty flavor enhancer on the quality and sensorial properties of the NaCl/MSG complex and actual food system. For characterizing the spray-dried NaCl/MSG complex, surface dimension, morphology, rheology, and saltiness intensity were estimated by increasing MSG (0-2.0%) levels at a fixed NaCl concentration (2.0%). MSG levels had no effect of the characteristics of the NaCl/MSG complex, although the addition of MSG increased the surface dimension of the NaCl/MSG complex significantly (p<0.05). Furthermore, the effect of MSG on enhancing the salty flavor was not observed in the solution of the NaCl/MSG complex. In the case of an actual food system, model meat products (pork patties) were prepared by replacing NaCl with MSG. MSG enhanced the salty flavor, thereby increasing overall acceptability of pork patties. Replacement of NaCl with MSG (<1.0%) did not result in negative sensorial properties of pork patties, although quality deterioration such as high cooking loss was found. Nevertheless, MSG had a potential application in meat product formulation as a salty flavor enhancer or a partial NaCl replacer when meat products were supplemented with binding agents.

• 한국축산식품학회지
• /
• 제34권4호
• /
• pp.552-557
• /
• 2014

This study investigated the effects of ${\gamma}$-aminobutylic acid (GABA) on the quality and sensorial properties of both the GABA/NaCl complex and model meat products. GABA/NaCl complex was prepared by spray-drying, and the surface dimensions, morphology, rheology, and saltiness were characterized. For model meat products, pork patties were prepared by replacing NaCl with GABA. For characteristics of the complex, increasing GABA concentration increased the surface dimensions of the complex. However, GABA did not affect the rheological properties of solutions containing the complex. The addition of 2% GABA exhibited significantly higher saltiness than the control (no GABA treatment). In the case of pork patties, sensory testing indicated that the addition of GABA decreased the saltiness intensity. Both the intensity of juiciness and tenderness of patties containing GABA also scored lower than the control, based on the NaCl reduction. These results were consistent with the quality characteristics (cooking loss and texture profile analysis). Nevertheless, overall acceptability of the pork patties showed that up to 1.5%, patties containing GABA did not significantly differ from the control. Consequently, the results indicated that GABA has a potential application in meat products, but also manifested a deterioration of quality by the NaCl reduction, which warrants further exploration.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.47-53
• /
• 1998

The polyimide film surface was modified with KOH aqueous solutions or sulfuric acid. The film thickness was increased by about 10% through the modification of film surface. Hydrolysis of amide bonds and hydration of water induced the increase. The polarity of the film surface increased and identified by contact angle measurement. The depth and roughness of modified was increased. After treatment of surface with water, alkyl and 4-pentyloxyaniline were introduced on the film surface by complex formation between anionic species formed on the imide surface and ammonium ion. The newly introduced alkyl group was identified by FT-IR spectroscopy. Surface polarity reduced dramatically and the roughness was increased after introduction of ammonium salt.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.144-153
• /
• 2007

In order to generate the input data for rapid prototyping, a new approach which is based on the implicit surface interpolation method is presented. In the method a surface is reconstructed by creating smooth implicit surface from unorganized cloud of points through which the surface should pass. In the method an implicit surface is defined by the adaptive local shape functions including quadratic polynomial function, cubic polynomial function and RBF(Radial Basis Function). By the reconstruction of a surface, various types of error in raw STL file including degenerated triangles, undesirable holes with complex shapes and overlaps between triangles can be eliminated automatically. In order to get the slicing data for rapid prototyping an efficient intersection algorithm between implicit surface and plane is developed. For the direct usage for rapid prototyping, a robust transformation algorithm for the generation of complete STL data of solid type is also suggested.