• 공업화학
• /
• 제7권3호
• /
• pp.543-553
• /
• 1996

산소전극 촉매로서 페롭스카이트형 산화물을 사용하여 알칼리형 연료전지에서의 산소환원반응에 관하여 연구하였다. 능금산(malic acid)을 사용하여 고표면적의 페롭스카이트형 $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$(x=0.00, 0.01, 0.10, 0.20, 0.35 및 0.50) 산화물을 제조하였으며, Fe 치환량과 암모니아수 첨가량에 따른 XRD 구조와 비표면적의 변화를 고찰하여 Fe와 암모니아간에 생성되어지는 착화합물이 페롭스카이트로의 구조안정화와 비표면적 증대의 주요임을 알았다. 그리고 페롭스카이트 단일상을 얻기 위해서는 다단계 승온처리가 필요했으며, XRD 실험결과 단순 정입방체상이 형성됨을 확인하였다. $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$ 산화물을 촉매로 사용한 알칼리형 연료전지용 산소전극의 산소환원반응활성을 측정하기 위하여 순환 전압-전류법, 정전압-전류법, 전류단절법 등을 이용하였다. $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$ 산화물에서 Fe의 치환비가 증가함에 따라, x=0.01에서 최소, x=0.20와 0.35 사이에서 최대의 산소환원활성(전류밀도)을 보였으며, 이와 같은 경향은 표면적의 변화와 무관하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1421-1423
• /
• 2001

$Ba(Mg_{1-x}Co_x)TaO_3$[BMCT] ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of 1525 $\sim$ 1625$^{\circ}C$ for 5hr. in air. The crystal structure of BMCT ceramics was investigated by the XRD. The microstructure of the specimens were observed by SEM. The structural properties of BMCT specimens were investigated as a function of composition and sintering temperature. All BMCT ceramics sintered over 1575$^{\circ}C$ were showed a polycrystalline complex perovskite structure without second phases and any unreacted materials. The density of BMCT (90/10) specimen sintered at 1575$^{\circ}C$ was 7.75g/$cm^2$. As the Co contents decreased, the ordering parameter of B-site in BMCT increased. The ordering parameter of BMCT(90/10) specimen sintered at 1575$^{\circ}C$ was 0.98.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1453-1455
• /
• 1998

$Ba(Mg,Ta)O_3-Ba(Co,Nb)O_3$ ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of 1500-$1575^{\circ}C$ for 5[hr.] in air. The crystal structure was investigated by the XRD. The microstructure of the ceramics were observed by SEM. The microwave properties of dielectric resonators were investigated as a function of composition and sintering temperature. $Ba(Mg,Ta)O_3-Ba(Co,Nb)O_3$ ceramics have a structure of complex perovskite type, and have peaks of (101),(102),(201),(202) and (212). In the case of the $0.7Ba(Mg,Ta)O_3-0.3Ba(Co,Nb)O_3$ ceramic resonator, dielectric constant, quality factor and temperature coefficient of resonant frequency(TCRF, ${\tau}_l$) were a good value of 26.5, 11.500 at 10[GHz] and -1.3[ppm/$^{\circ}C$] from $25^{\circ}C$ to $60^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.136-144
• /
• 1999

텅스템브론즈형 고주파 유전체의 $BaORe_2O_3TiO_2$(BLT)와 $BaO(Nd({0.77}Y_{0.23})_2O_34TiO_2(B(NY)T)$의 결정구조를 Rietveld 정밀화법으로 분석하였다. 양이온은 X-선 데이터로부터, 산소이온은 중성자 데이터로부터 정밀화한 'combined법'에 의해 가장 신뢰성이 높은 결정구조분석 결과를 얻었다. Mateeva 등이 처음 제시한 결정구조의 결정학적 모순점을 해결하였다. BaORe2O34TiO2(Re=La, Nd, Y) 유전체는 $3\times2$개의 페롭스카이트 블록과 이 블록사이에 형성된 4개의 pentagon-channel로 이뤄진다. Ti-O6팔면체는 tilted 및 변형된 구조를 갖고 있고, 이에 의해 같은 z-층에 있는 Ba 및 Re 이온의 변위되어 초격자(c$\approx$ 7.6$\AA$)를 형성된다. Re 이온반경이 작은 B(NY)T의 Ti-O6 팔면체가 tilting 및 변형이 큰 것으로 나타났다. 유전상수 $\varepsilon_{\gamma}$과 온도계수 $au_\varepsilon$은 BLT의 경우 각각 $109.5, -180 ppm/^{\circ}C$였고, B(NY)T 경우 $76, +40ppm/^{\circ}C$이었다. Re 이온 크기가 작은 시료의 $\tau$$\varepsilon$이 +값을 나타내었다. 복합 페롭스카이트에서 관찰되는 $\tau_\varepsilon$과 팔면체 tilting과의 관계를 본 텅스텐 브론즈 구조재료에서 고찰하였다.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.34-42
• /
• 2007

A perovskite-type ($La_{0.6}Sr_{0.4}Ti_{0.2}Fe_{0.8}O_{3-{\delta}}$) dense ceramic membrane was prepared by polymerized complex method, using citric acid as a chelating agent and ethylene glycol as an organic stabilizer. Effect of Ti addition on lanthanum-strontium ferrite mixed conductor was investigated by evaluating the thermal expansion coefficient, the oxygen flux, the electrical conductivity, and the phase stability. The thermal expansion coefficient in air was $21.19\;{\times}\;10^{-6}/K$ at 473 to 1,223 K. At the oxygen partial pressure of 0.21 atm ($20%\;O_2$), the electrical conductivity increased with temperature and then decreased after 973 K. The decrement in electrical conductivity at high temperatures was explained by a loss of the lattice oxygen. The oxygen flux increased with temperature and was $0.17\;mL/cm^2{\cdot}min$ at 1,223 K. From the temperature-dependent oxygen flux data, the activation energy of oxygen ion conduction was calculated and was 80.5 kJ/mol at 1,073 to 1,223 K. Also, the Ti-added lanthanum-strontium ferrite mixed conductor was structurally and chemically stable after 450 hours long-term test at 1,173 K.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.310-315
• /
• 2009

$La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ 조성의 페롭스카이트 산화물을 구연산 법으로 합성하였다. 전구물질의 TGA 열분해 분석 결과 $150{\sim}650^{\circ}C$에서 구연산 복합체가 분해되고, XRD 분석결과 $1,000^{\circ}C$ 이후에 순수한 페롭스카이트 구조가 나타났다. 분말을 일축가압 성형 후 $1,300^{\circ}C$로 소결하여 두께 1.6 mm의 치밀한 구조의 분리막을 제작하였다. $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$의 전기 전도도는 공기분위기에서 $600^{\circ}C$까지는 온도가 증가함에 따라 증가하고, 그 이상의 온도에선 결정 격자로부터의 산소결함 증가에 따라 점차 감소하였다. $700{\sim}950^{\circ}C$ 범위에서 수행된 산소투과실험에서, 투과량은 온도증가에 따라 0.045에서 $0.415ml/cm^2{\cdot}min$로 증가하였으며, 산소투과의 활성화에너지는 89.17 kJ/mol이었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1679-1683
• /
• 2013

Intergrowth perovskite type complex oxides $La_{0.8}Ln_{0.2}Sr_2MnCrO_{7-{\delta}}$ (Ln=La, Nd, Gd, and Dy) have been synthesized by sol-gel method. Rietveld profile analysis shows that the phases crystallize with tetragonal unit cell in the space group I4/mmm. The unit cell parameters a and c decrease with decreasing effective ionic radius of the lanthanide ion. The magnetic studies suggest that the ferromagnetic interactions are dominant due to $Mn^{3+}$-O-$Mn^{4+}$ and $Mn^{3+}$-O-$Cr^{3+}$ double exchange interactions. Both Weiss constant (${\theta}$) and Curie temperature ($T_C$) increase with decreasing ionic radius of lanthanide ion. It was found that the transport mechanism is dominated by Mott's variable range hopping (VRH) model with an increase of Mott localization energy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.88-92
• /
• 2002

$Ba(Zn_{0.8}Co_{0.2})_{1/3}Ta_{2/3}O_3$ [BZCT(80/20)] ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1450{\sim}1550^{\circ}C$ for 5hr. in air. The structural properties of BZCT(80/20) ceramics were investigated as a function of sintering temperature. The BZCT(80/20) ceramics sintered at $1550^{\circ}C$ showed a polycrystalline complex perovskite structure without second phases and any unreacted materials. Increasing the sintering temperature, the bulk density and ordering were increased. The bulk density of the BZCT(80/20) ceramics sintered at $1550^{\circ}C$ was 7.50[$g/cm^2$]. Increasing the sintering temperature, the average grain size were increased and pore were decreased.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.110-114
• /
• 2001

$0.7Ba(Mg{\frac}_{1}{3}Ta{\frac}_{1}{3})O_3-0.3Ba({\frac}_{1}{3}Nb{\frac}_{1}{3})O_3ceramics$ were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1500{\sim}1575[^{\circ}C]$ for 5 hours in air. The microwave dielectric properties of the specimens were investigated with sintering temperature. The 0.7BMT-0.3BCN ceramics showed typical XRD patterns of the complex perovskite structure. Dielectric constant and quality factor were increased with increasing the sintering temperature. In the case of the specimens sintered at $1575[^{\circ}C]$ for 5 hours, dielectric constant, quality factor and temperature coefficient of resonant frequency were good values of 28,23545 at 10[㎓] and -1.2 $[ppm/^{\circ}C]$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.383-386
• /
• 2000

The 0.6Ba(Zn$_{1}$3/Ta$_{2}$3/)O$_3$-0.4Ba(Co$_{1}$3/Nb$_{2}$3/)O$_3$ceramics were prepared by the conventional mixed oxide method. The structural properties of the 0.6BZT-0.4BCN ceramics with the sintering temperature were investigated by XRD, SEM. The 0.6BZT-0.4BCN ceramics had a complex-perovskite structure. Increasing the sintering temperature, the peak intensity of the superstructure reflection plane were increased and the density and ordering were increased. The density of the 0.6BZT-0.4BCN ceramics sintered at 1475$^{\circ}C$ was 6.455[g/cm$^3$].