• Journal of the Korean Magnetics Society
• /
• v.23 no.4
• /
• pp.135-143
• /
• 2013

The clip-type pulsimeter equipped with a Hall sensor has a permanent magnet attached in the "Chwan" position to the center of a radial artery. The clip-type pulsimeter is composed of a hardware system measuring voltage signals. These electrical bio-signals display pulse rate, non-invasive blood pressure, respiratory rate, pulse wave velocity (PWV), and spatial pulse wave velocity (SPWV) simultaneously measured by using the radial artery pulsimeter, the electrocardiograph (ECG), and the photoplethysmograph (PPG). The findings of this research may be useful for developing a oriental-western biomedical signal storage device, that is, the new and fusion patient monitor, for a U-health-care system.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.11-21
• /
• 2018

Safety accidents, which are called industrial accidents in construction work, are often caused by unstable physical and personal conditions combined during preparation and execution of work. It is difficult to manage all the construction works, but especially in the field of apartment construction work, complex and many kinds of works are being carried out at the same time. In the current construction, safety regulations such as safety management guidelines are generally well maintained, but the execution of manpower resources that can fulfill them is limited, and it is difficult to reduce the accident rate and loss cost. Therefore, in this study, it is a reality that most of the types of construction work are under contruction by subcontracting contract, so they are limit by methods of manual maintenance and safety education. Currently, the subcontractor is also allowed to perform safety management through the composition of the safety management review body, but it is operated formally. So alternatives to this were studied. As a result, safety accidents occur in the subcontractor's worker due to vertical integration, which is characteristic of the construction industry, together to the contractor, the safety management system is based on a safety construction system in which a worker who has a certain qualification condition such as career experience of the work type, work understanding of the work type, and management experience of the work type among the subcontractor, when we manage based on mutual personality which is the personality of interpersonal relationship that can communicate with each other by work type, process and grouping, it is concluded that effective and practical safety management can be achieved to reduce the accident rate and loss cost.

• STI Policy Review
• /
• v.3 no.2
• /
• pp.130-151
• /
• 2012

Fraunhofer was founded in 1949 and grew into Europe's largest application-oriented research organization. Fraunhofer currently employs over 20,000 members in Germany, is internationally networked, and manages an R&D budget of over 1,8 Billion Euros per year. An important step for Fraunhofer to become an integral component of the German innovation system was the introduction of the Fraunhofer Model of financing based on a performance-related system of financial management. The underlying model of the allocation and distribution of public funding to Fraunhofer that is subsequently allotted to specific research groups is one of the success factors of Fraunhofer. Fraunhofer is proud of its decentralized organizational model. Fraunhofer is comprised of 60 Institutes in Germany working in different fields, under one legal framework, and with a strong brand value. Every Fraunhofer Institute is affiliated with a German University and every institute director simultaneously holds a chair at the affiliated university. It is a challenge for the headquarter organization to balance the intended competition of individual Fraunhofer Institutes with complementarity cooperation in science among Fraunhofer-Institutes, especially when coming from different knowledge domains; however, this goal results in a significant advantage. The unique strengths of Fraunhofer offer system solutions in a world with increasingly complex R&D challenges. While growing to become the largest organization on Europe to focus on applied research it is the challenge to remain an agile organization that is flexible in organizational structure. Fraunhofer has reached a well-recognized position in the European innovation landscape. It is often referred to by science and governments as a role model for innovation policy and a key element of the latest successes in the German economy that has recovered quicker from the latest economic crisis than most other western economies. The paper explains Fraunhofer as an organizational paradigm and its underlying management model to elaborate on the challenges of managing a research organization. We wish to show how it is possible to transfer the management model and philosophy of Fraunhofer to innovation systems with different framework conditions and challenges. A universal conclusion may be drawn based on the description of Fraunhofer; however, changes in existing structures and innovation systems cannot be implemented over night.

• KSLA Bulletin
• /
• s.2
• /
• pp.43-56
• /
• 2010

Since core scholarly journals have been digitalized, license contracts for e-resources have been dramatically increased. Librarians have had difficulties in understanding various and complex license models that are proposed by publishers in a period of time. The standardization of license models for journals have been more in demand and standard model license for journals have been developed by librarians, publishers, consortia and the third party. In this study, we explain the development of the standard license model of KESLI consortium.(hereafter, KESLI model) The availability of KESLI model has been analyzed by comparing with established standard license models. As a result, KESLI model is proved to be adopted and used in a practical contract process of e-journals through consortium.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.135-145
• /
• 2002

Active networks represent a new approach to network architecture. Nodes(routers, switches, etc.) can perform computations on user data, while packets can carry programs to be executed on nodes and potentially change the state of them. While active networks provide a flexible network iufrastructure, they are more complex than traditional networks and raise considerable security problems. Nodes are Public resources and are essential to the proper and contract running of many important systems. Therefore, security requirements placed upon the computational environment where the code of packets will be executed must be very strict. Trends of research for active network security are divided into two categories: securing active nodes and securing active packets. For example, packet authentication or monitoring/control methods are for securing active node, but some cryptographic techniques are for the latter. This paper is for transferring active packets securely between active nodes. We propose a new method that can transfer active packets to neighboring active nodes securely, and execute executable code included in those packets in each active node. We use both public key cryptosystem and symmetric key cryptosystem in our scheme

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.76.3-77
• /
• 2021

GMT secondary mirror system consists of 7 segmented adaptive mirrors. Each segment consists of a thin shell mirror, actuators and a reference body. The thin shell has a few millimeters of thickness so that it can be easily bent by push and pull force of actuators to compensate the wavefront disturbance of light due to air turbulence. The one end of actuator is supported by the reference body and the other end is adapted to this thin shell. One of critical role of the reference body is to provide the reference surface for the thin shell actuators. Therefore, the reference body is one of key components to succeed in development of GMT ASM. Recently, Korea Research Institute of Standards and Science (KRISS) and University of Arizona (UA) has signed a contract that they will cooperate to develop the first set of off-axis reference body for GMT ASM. This project started August 2021 and will be finished in Dec. 2022. The reference body has total 675 holes to accommodate actuators and 144 pockets for lightweighting. The rear surface has a curved rib shape with radius of curvature of 4387 mm with offset of 128.32mm. Since this reference body is placed just above the thin shell so that the front surface shape needs to be close to that of thin shell. The front surface has a concave off-axis asphere, of which radius of curvature is 4165.99 mm and off-axis distance is about 1088 mm. The material is Zerodur CTE class 1 (CTE=0.05 ppm/oC) from SCHOTT. All the actuator holes and pockets are machined normal to the front surface. It is a very complex challenging optical elements that involves sophisticated machining process as well as accurate metrology. After finishing the fabrication of reference body in KRISS, it will be shipped to UA for final touches and finally sent to Adoptica in Italy, in early 2023. This paper presets the development plan for the GMT ASM Reference Body and relevant fabrication and metrology plans.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.77-97
• /
• 2019

The large amount of data that emerges from the initial connection environment of the Fourth Industrial Revolution is a major factor that distinguishes the Fourth Industrial Revolution from the existing production environment. This environment has two-sided features that allow it to produce data while using it. And the data produced so produces another value. Due to the massive scale of data, future information systems need to process more data in terms of quantities than existing information systems. In addition, in terms of quality, only a large amount of data, Ability is required. In a small-scale information system, it is possible for a person to accurately understand the system and obtain the necessary information, but in a variety of complex systems where it is difficult to understand the system accurately, it becomes increasingly difficult to acquire the desired information. In other words, more accurate processing of large amounts of data has become a basic condition for future information systems. This problem related to the efficient performance of the information system can be solved by building a semantic web which enables various information processing by expressing the collected data as an ontology that can be understood by not only people but also computers. For example, as in most other organizations, IT has been introduced in the military, and most of the work has been done through information systems. Currently, most of the work is done through information systems. As existing systems contain increasingly large amounts of data, efforts are needed to make the system easier to use through its data utilization. An ontology-based system has a large data semantic network through connection with other systems, and has a wide range of databases that can be utilized, and has the advantage of searching more precisely and quickly through relationships between predefined concepts. In this paper, we propose a defense ontology as a method for effective data management and decision support. In order to judge the applicability and effectiveness of the actual system, we reconstructed the existing air force munitions situation management system as an ontology based system. It is a system constructed to strengthen management and control of logistics situation of commanders and practitioners by providing real - time information on maintenance and distribution situation as it becomes difficult to use complicated logistics information system with large amount of data. Although it is a method to take pre-specified necessary information from the existing logistics system and display it as a web page, it is also difficult to confirm this system except for a few specified items in advance, and it is also time-consuming to extend the additional function if necessary And it is a system composed of category type without search function. Therefore, it has a disadvantage that it can be easily utilized only when the system is well known as in the existing system. The ontology-based logistics situation management system is designed to provide the intuitive visualization of the complex information of the existing logistics information system through the ontology. In order to construct the logistics situation management system through the ontology, And the useful functions such as performance - based logistics support contract management and component dictionary are further identified and included in the ontology. In order to confirm whether the constructed ontology can be used for decision support, it is necessary to implement a meaningful analysis function such as calculation of the utilization rate of the aircraft, inquiry about performance-based military contract. Especially, in contrast to building ontology database in ontology study in the past, in this study, time series data which change value according to time such as the state of aircraft by date are constructed by ontology, and through the constructed ontology, It is confirmed that it is possible to calculate the utilization rate based on various criteria as well as the computable utilization rate. In addition, the data related to performance-based logistics contracts introduced as a new maintenance method of aircraft and other munitions can be inquired into various contents, and it is easy to calculate performance indexes used in performance-based logistics contract through reasoning and functions. Of course, we propose a new performance index that complements the limitations of the currently applied performance indicators, and calculate it through the ontology, confirming the possibility of using the constructed ontology. Finally, it is possible to calculate the failure rate or reliability of each component, including MTBF data of the selected fault-tolerant item based on the actual part consumption performance. The reliability of the mission and the reliability of the system are calculated. In order to confirm the usability of the constructed ontology-based logistics situation management system, the proposed system through the Technology Acceptance Model (TAM), which is a representative model for measuring the acceptability of the technology, is more useful and convenient than the existing system.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.157-175
• /
• 2012

It is difficult to evaluate the performance of process innovation of e-procurement which has large scale and complex processes. The existing evaluation methods for measuring the effects of process innovation have been mainly done with statistically quantitative methods by analyzing operational data or with qualitative methods by conducting surveys and interviews. However, these methods have some limitations to evaluate the effects because the performance evaluation of e-procurement process innovation should consider the interactions among participants who are active either directly or indirectly through the processes. This study considers the e-procurement process as a complex system and develops a simulation model based on MAS(Multi-Agent System) to evaluate the effects of e-procurement process innovation. Multi-agent based simulation allows observing interaction patterns of objects in virtual world through relationship among objects and their behavioral mechanism. Agent-based simulation is suitable especially for complex business problems. In this study, we used Netlogo Version 4.1.3 as a MAS simulation tool which was developed in Northwestern University. To do this, we developed a interaction model of agents in MAS environment. We defined process agents and task agents, and assigned their behavioral characteristics. The developed simulation model was applied to G2B system (KONEPS: Korea ON-line E-Procurement System) of Public Procurement Service (PPS) in Korea and used to evaluate the innovation effects of the G2B system. KONEPS is a successfully established e-procurement system started in the year 2002. KONEPS is a representative e-Procurement system which integrates characteristics of e-commerce into government for business procurement activities. KONEPS deserves the international recognition considering the annual transaction volume of 56 billion dollars, daily exchanges of electronic documents, users consisted of 121,000 suppliers and 37,000 public organizations, and the 4.5 billion dollars of cost saving. For the simulation, we analyzed the e-procurement of process of KONEPS into eight sub processes such as 'process 1: search products and acquisition of proposal', 'process 2 : review the methods of contracts and item features', 'process 3 : a notice of bid', 'process 4 : registration and confirmation of qualification', 'process 5 : bidding', 'process 6 : a screening test', 'process 7 : contracts', and 'process 8 : invoice and payment'. For the parameter settings of the agents behavior, we collected some data from the transactional database of PPS and some information by conducting a survey. The used data for the simulation are 'participants (government organizations, local government organizations and public institutions)', 'the number of bidding per year', 'the number of total contracts', 'the number of shopping mall transactions', 'the rate of contracts between bidding and shopping mall', 'the successful bidding ratio', and the estimated time for each process. The comparison was done for the difference of time consumption between 'before the innovation (As-was)' and 'after the innovation (As-is).' The results showed that there were productivity improvements in every eight sub processes. The decrease ratio of 'average number of task processing' was 92.7% and the decrease ratio of 'average time of task processing' was 95.4% in entire processes when we use G2B system comparing to the conventional method. Also, this study found that the process innovation effect will be enhanced if the task process related to the 'contract' can be improved. This study shows the usability and possibility of using MAS in process innovation evaluation and its modeling.

• International Commerce and Information Review
• /
• v.15 no.2
• /
• pp.285-313
• /
• 2013

By the revision of the Commercial Code of Korea in 1991 and 2007, some provisions for the regulation of Time Charterparty have been introduced into our own maritime law system. But, those provisions are in their nature mainly the reproduction of the provisions prescribed in the standard forms of time charterparty which are widely used, such as BALTIME Charter and NYPE Form, and the subject matters of their regulation are restrictive, so that the applicability of the provisions is not desirable. The cargo is lost or damaged, the cargo owner should seek compensation form, or sue, the carrier as, traditionally, under the COGSA, the cargo carrier is responsible for loss of damage of cargo. However, it is difficult to determine who is the responsible carrier under charters. There is no test to determine the carrier, but the courts in every country generally consider the bill of lading. Although the master has general authority to sign bills of lading on behalf of the shipowner, he can also sign bills of lading for, and on behalf of, the charterer. In this case, the charter is considered the carrier. Furthermore, the charterer is authorized to contract with third parties on behalf of the shipowner and, as such, the responsible carrier is the shipowner. Therefore, when determining the carrier we should examine carefully the all factors and the circumstances surrounding the case. Also, negligence of a captain of a time-chartered ship causing damages to a third party. It will analyze the legal character of a time-charter contract, review judicial precedents on time-charter. The Inter-Club Agreement was drawn up and is intended to be a somewhat easier way of allocating liability for cargo claims between owners and charterers and, although there is still scope for disputes to arise, the Inter-Club Agreement does in fact to some extent make the allocation of liabilities for cargo claims easier. Finally, it will also make legislative suggestions to resolve complex issues involving maritime transportation contracts under the current Commercial Code.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.300-305
• /
• 2002

The construction project is a complex undertaking involving multiple participants. Conflicts are inherently natural in the construction projects and subsequently, a success of projects mainly depends on how well to cope with the conflicts. In the past, courts usually took the position that the professional's exposure in damages for negligent performance of any of his/her duties would not extend to strangers to the contractual arrangement. However, courts today generally reject that rationale which was earlier in vogue and protect architects, engineers, and contractors from being liable to third parties. It means that the lack of privity of contract could rarely protect a profession in a suit alleging the negligence or professional malpractice in preparing plans or specifications. The main goal of this paper is to enhance the understanding of the legal aspect of privity and to provide the trend of no-privity disputes through the analysis of lawsuit cases during the last 40 years. On the base of the analysis, importance of the third relationship and the liability in construction disputes is presented.