• The Journal of Engineering Geology
• /
• v.34 no.3
• /
• pp.415-427
• /
• 2024

This study undertook a quantitative analysis of the distribution of fractures in deep drillcore from a Precambrian metamorphic complex on the north face of Hongcheon-gun, Gangwon-do, Korea. The fracture distribution with depth, inclination of fractures, and grain size in the fracture zone were measured and statistical techniques applied to derive probability distributions of fracture intervals. Analysis of the inclination angles of fracture planes showed that sub-horizontal fractures are dominant, and fracture spacing is mainly ≤0.5 m, with a median of 0.09 m, first quartile of 0.04 m, and third quartile of 0.18 m, indicating very dense fracture development. Statistical analysis of joint properties was undertaken with fitting using five probability density functions (double Weibull, exponential, generalized logistic, gamma, and lognormal). The lognormal distribution (sum of squared errors, SSE = 2.80) yielded the best fit based on the sum of residual squares. Quantitative characterization of the fracture characteristics of deep bedrock in the Hongcheon area is important for various geotechnical applications such as groundwater flow modeling, slope stability assessment, and underground structure design. In future studies, it will be necessary to combine in situ stress measurements and geophysical surveys to determine the relationship between fracture development and the local stress field.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.147-161
• /
• 2012

This study is to assess the effect of horizontal misfit of an implant supported 3-unit fixed prosthodontics on the stress development at the marginal cortical bone surrounding implant neck. Two finite element models consisting of a three unit fixed prosthodontics and an implant/bone complex were constructed on a three dimensional basis. The three unit fixed prosthodontics were designed either shorter (d=17.8mm model) or longer (d=18.0mm model) by 0.1mm than the span of two implants placed at the mandibular second premolar and second molar areas 17.9mm apart. Fitting of the fixed prosthodontics onto the implant abutments was simulated by a total of 6 steps, that is to say, 0.1mm displacement per each step, using DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Stresses in the fixed prosthodontics and implants were evaluated using von-Mises stress, maximum compressive stress, and radial stress as necessary. The d=17.8mm model assembled successfully on to the implant abutments while d=18.0mm model did not. Regardless if the fixed prosthodontics fitted onto the abutments or not, excessively higher stresses developed during the course of assembly trial and thereafter. On the marginal cortical bone around implants during the assembly, the peak tensile and compressive stresses were as high as 186.9MPa and 114.1MPa, respectively, even after the final sitting of the fixed prosthodontics (for d=17.8mm model). For this case, the area of marginal bone subject to compressive stresses above 55MPa, equivalent of the $4,000{\mu}{\varepsilon}$, i.e. the reported threshold strain to inhibit physiological remodeling of human cortical bone, extended up to 2mm away from implant during the assembly. Horizontal misfit of 0.1mm can produce excessively high stresses on the marginal cortical bone not only during the fixed prosthodontics assembly but also thereafter.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.213-230
• /
• 2008

The aim of this study was to analyze the initial movement and the stress distribution of each tooth and periodontal ligament during the lingual lever-arm retraction of 6 maxillary incisors using FEA. Two kinds of finite element models were produced: 2-properties model (simple model) and 24-properties model (multi model) according to the material property assignment. The subject was an adult male of 23 years old. The DICOM images through the CT of the patient were converted into the 3D image model of a skull using the Mimics (version 10.11, Materialise's interactive Medical Image Control System, Materialise, Belgium). After series of calculating, remeshing, exporting, importing process and volume mesh process was performed, FEA models were produced. FEA models are consisted of maxilla, maxillary central incisor, lateral incisor, canine, periodontal ligaments and lingual traction arm. The boundary conditions fixed the movements of posterior, sagittal and upper part of the model to the directions of X, Y, Z axis respectively. The model was set to be symmetrical to X axis. Through the center of resistance of maxilla complex, a retraction force of 200g was applied horizontally to the occlusal plane. Under this conditions, the initial movements and stress distributions were evaluated by 3D FEA. In the result, the amount of posterior movement was larger in the multi model than in the simple model as well as the amount of vertically rotation. The pattern of the posterior movement in the central incisors and lateral incisors was controlled tipping movement, and the amount was larger than in the canine. But the amount of root movement of the canine was larger than others. The incisor rotated downwardly and the canines upwardly around contact points of lateral incisor and canine in the both models. The values of stress are similar in the both simple and multi model.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.

• Molecules and Cells
• /
• v.43 no.10
• /
• pp.870-879
• /
• 2020

Dendrites require precise and timely delivery of protein substrates to distal areas to ensure the correct morphology and function of neurons. Many of these protein substrates are supplied in the form of ribonucleoprotein (RNP) complex consisting of RNA-binding proteins (RBPs) and mRNAs, which are subsequently translated in distal dendritic areas. It remains elusive, however, whether key RBPs supply mRNA according to local demands individually or in a coordinated manner. In this study, we investigated how Drosophila sensory neurons respond to the dysregulation of a disease-associated RBP, Ataxin-2 (ATX2), which leads to dendritic defects. We found that ATX2 plays a crucial role in spacing dendritic branches for the optimal dendritic receptive fields in Drosophila class IV dendritic arborization (C4da) neurons, where both expression level and subcellular location of ATX2 contribute significantly to this effect. We showed that translational upregulation through the expression of eukaryotic translation initiation factor 4E (eIF4E) further enhanced the ATX2-induced dendritic phenotypes. Additionally, we found that the expression level of another disease-associated RBP, fragile X mental retardation protein (FMRP), decreased in both cell bodies and dendrites when neurons were faced with aberrant upregulation of ATX2. Finally, we revealed that the PAM2 motif of ATX2, which mediates its interaction with poly(A)-binding protein (PABP), is potentially necessary for the decrease of FMRP in certain neuronal stress conditions. Collectively, our data suggest that dysregulation of RBPs triggers a compensatory regulation of other functionally-overlapping RBPs to minimize RBP dysregulation-associated aberrations that hinder neuronal homeostasis in dendrites.

• Journal of Embryo Transfer
• /
• v.30 no.4
• /
• pp.319-325
• /
• 2015

Gangliosides exist in glycosphingolipid-enriched domains on the cell membrane and regulate various functions such as adhesion, differentiation, and receptor signaling. Ganglioside GM3 by ST3GAL5 enzyme provides an essential function in the biosynthesis of more complex ganglio-series gangliosides. However, the role of gangliosides GM3 in porcine oocytes during in vitro maturation and early embryo development stage has not yet understood clear. Therefore, we examined ganglioside GM3 expression patterns under apoptosis stress during maturation and preimplantation development of porcine oocytes and embryos. First, porcine oocytes cultured in the NCSU-23 medium for 44 h after $H_2O_2$ treated groups (0.01, 0.1, 1 mM). After completion of meiotic maturation, the proportion MII (44 h) was significantly different among control and the H2O2 treated groups ($76.8{\pm}0.3$ vs $69.1{\pm}0.4$; 0.01 mM, $55.7{\pm}1.0$; 0.1 mM, $38.2{\pm}1.6%$; 1 mM, P<0.05). The expressions of ST3GAL5 in $H_2O_2$ treated groups were gradually decreased compared with control group. Next, changes of ST3GAL5 expression patterns were detected by using immunofluorescene (IF) staining during preimplantation development until blastocyst. As a result, we confirmed that the expressions of ST3GAL5 in cleaving embryos were gradually decreased (P<0.05) according to the early embryo development progress. Based on these results, we suggest that the ganglioside GM3 was used to the marker as pro-apoptotic factor in porcine oocyte of maturation and early embryo production in vitro, respectively. Furthermore, our findings will be helpful for better understanding the basic mechanism of gangliosides GM3 regulating in oocyte maturation and early embryonic development of porcine in vitro.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.373-388
• /
• 2010

Fracture causes serious problems in many instance of prosthetic failures. But it is hard to find the definite causes when fractures occur. Fractography encompasses the examination of fracture surfaces that contain features resulting from the interaction of the advancing crack with the microstructure of the material and the stress fields. All fractured specimens(implant retaining screw) retrieved from Gangneung-Wonju national university dental hospital for 3 years(from 2007 to 2009). After pretreatment of samples, the scanning electon microscope were used for surface examination and fracture analysis. In case of most of the fractured specimens, fracture took place by fatigue fracture and fractured surface represents fatigue striation. Fatigue striation indicate the progression of the crack front under cyclic loading, are characteristic of stage 2 crack growth. The site of crack initiation and stage 1 crack growth were not easily identified in any of the failure, presumably because of the complex microstructural features of the polycrystalline sample. In case of fractured by overload, dimpled or cleavage surface were observed. Using the interpretation of characteristic markings(ratchet mark, fatigue striation, dimple, cleavage et al) in fracture surfaces, failure events containing the crack origin, crack propagation, material deficiency could be understand. Using the interpretation of characteristic markings in fracture surfaces, cause and mechanism of fractures could be analyzed.

• Molecules and Cells
• /
• v.25 no.4
• /
• pp.559-565
• /
• 2008

Members of the TGA family of basic domain/leucine zipper transcription factors regulate defense genes through physical interaction with NON-EXPRESSOR OF PR1 (NPR1). Of the seven TGA family members, TGA4/octopine synthase (ocs)-element-binding factor 4 (OBF4) is the least understood. Here we present evidence for a novel function of OBF4 as a regulator of flowering. We identified CONSTANS (CO), a positive regulator of floral induction, as an OBF4-interacting protein, in a yeast two-hybrid library screen. OBF4 interacts with the B-box region of CO. The abundance of OBF4 mRNA cycles with a 24 h rhythm under both long-day (LD) and short-day (SD) conditions, with significantly higher levels during the night than during the day. Electrophoretic mobility shift assays revealed that OBF4 binds to the promoter of the FLOWERING LOCUS T (FT) gene, a direct target of CO. We also found that, like CO and FT, an OBF4:GUS construct was prominently expressed in the vascular tissues of leaf, indicating that OBF4 can regulate FT expression through the formation of a protein complex with CO. Taken together, our results suggest that OBF4 may act as a link between defense responses and flowering.

• Korean Journal of Environmental Biology
• /
• v.32 no.4
• /
• pp.271-285
• /
• 2014

Aluminum flows into the river from the abandoned mine leachate, industrial wastewater, and sewage and is responsible for acute toxicity in aquatic organisms. Recently, the number of reports have indicated the increased toxicity in a variety of aquatic organisms' due to the aluminum toxicity. In this study, we reviewed the toxicity of aluminum on aquatic invertebrates, fishes and amphibians and suggested the guideline for management of aluminum residues in aquatic environment and strategies for aluminum toxicity evaluation. In aquatic animals aluminum complexes evoke gill dysfunction primarily, the cytotoxicity, genotoxicity, oxidative stress, disruption of endocrine function, reproductive success, metabolism and homeostasis. Notably, at environmentally relevant concentration, aluminum complex can alter the hormone levels in fish in acidic condition. Further, since the solubility of aluminum is higher in the acidic and basic conditions, thus it is likely that the toxic effects of aluminum may not only occur in acidic water near the abandoned mines but also in lakes and rivers, where pH is raised by algal bloom.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.167-174
• /
• 2007

Heat shock protein (HSP) 70 functions as a molecular chaperon and reduces stress-induced denaturation and aggregation of intracellular proteins. Erythropoietin (EPO) plays an important role during acute renal failure repair process by rapidly correcting anemia and enhancing renal tubular regeneration. The purpose of this study was to examine the effect of EPO treatment on renal HSP70 expression. Male Sprague-Dawley rats were injected rHUEPO. Kidney were preserved by in vivo perfusion with paraformaldehyde-lysine-periodate (PLP) and processed for immunohistochemistry and electron microscopy. In control kidney, HSP70 was expressed in the cortex, outer medulla and inner medulla. Especially, HSP immunoreactiviy was mainly founded in descending thin limb of outer medulla and inner medullary collecting duct. In EPO treated kidney, HSP70 expression markedly increased in the descending thin limb of outer medulla and newly detected in cortical collecting duct. Electron microscopy showed the presence of HSP immunoreactivity on the intracelluar vesicles and Golgi complex of descending thin limb and cortical collecting duct. These findings suggest that EPO treatment leads to new production of HSP70 in renal tubular cells, and induction of HSP70 by rHuEPO is causally related to protective function.