• 한국의류산업학회지
• /
• 제5권4호
• /
• pp.408-412
• /
• 2003

The micro structure of POY was modified and a wool-like touch yarn of composite fibers with different shrinkage was made. With this yarn 12 different fabrics with wool like touch were prepared. The characteristic physical property changes of the fabrics examined are as follows: 1. In all cases, the initial high shrinkage stages were observed in hot water treatment and the 3D images of complex multilayer of typical doubling fibers with different shrinkage were also observed in hot air treatment of 170C. 2. The tensile strength changes of satin and plain fabrics with the change of twist count showed similar behavior. However, WT's were slightly higher and RT's was lower in twill and satin fabrics than those in plain fabric. 3. Since a slight decrease of B's of twill fabric found with increasing twist count under given experimental condition, it could be influenced on the anti-drape stiffness was decreased and flexibility was increased. 4. A significant decrease of G values was observed in the twist count 800-1000 T.P.M However, in the twist count higher than 1000 T.P.M G values observed were kept nearly constant. 5. MIU of plain and twill fabrics showed a drastic decrease at the twist count higher than 1000 T.P.M.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.394-403
• /
• 2006

A new equivalent linearization technique is proposed for a friction damper-brace system (FDBS) idealized as a elastoplastic system. The equivalent linearization technique utilizes secant stiffness and dissipated energy defined by the probability distribution of the extremal displacement of the FDBS. In addition, a conversion scheme is proposed so that an equivalent linear system is designed first and converted to the FDBS. For comparative study, an existing model update technique based on system identification is modified in a form appropriate to update single element. For the purpose of verification, shaking table tests of a small scale three-story shear building model, in which a rotational FDBS is installed, are conducted and equivalent linear systems are obtained using the proposed technique and the model update technique. Complex eigenvalue analysis is conducted for those equivalent linear systems, and the natural frequencies and modal damping ratios are compared with those obtained from system identification. Additionally, RMS and peak responses obtained from time history analysis of the equivalent linear systems are compared with measured ones.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.259-264
• /
• 2002

인장계류된 원통형실린더의 동적 거동해석에 관한 일련의 연구수행 결과는 다음과 같다. 1) 실린더형 부유체의 중심점을 인장계류시킨 새로운 개념의 부유식 구조물의 동적거동특성을 파악하였다. 2) 규칙파에서도 부유체와 테더(tether), 입사파의 상호간섭으로 인한 운동특성을 해석하였다. 3) 비선형유체력(2w, 3w)으로 인한 비선형 운동 응답 특성을 분석하였다. 4) 테더강성(tether stiffness)의 결정에 있어서 부유체와의 상호간섭 효과 뿐만 아니라 고주파수 영역에서의 공진을 충분히 고려하여 결정해야 한다. 5) 구조물의 설계시 Surge mode에서는 장주기 표류운동을 발생시키므로 Set down 등의 현상을 고려해야 한다.

• Computers and Concrete
• /
• 제1권2호
• /
• pp.211-226
• /
• 2004

A relatively simple multiple-vertical-line-element macro model has been incorporated into a standard computer code DRAIN-2D. It was used in blind predictions of seismic response of cantilever RC walls subjected to a series of consequent earthquakes on a shaking table. The model was able to predict predominantly flexural response with relative success. It was able to predict the stiffness and the strength of the pre-cracked specimen and time-history response of the highly nonlinear wall as well as to simulate the shift of the neutral axis and corresponding varying axial force in the cantilever wall. However, failing to identify the rupture of some brittle reinforcement in the third test, the model was not able to predict post-critical, near collapse behaviour during the subsequent response to two stronger earthquakes. The analysed macro model seems to be appropriate for global analyses of complex building structures with RC structural walls subjected to moderate/strong earthquakes. However, it cannot, by definition, be used in refined research analyses monitoring local behaviour in the post critical region.

• Structural Engineering and Mechanics
• /
• 제50권1호
• /
• pp.19-36
• /
• 2014

This paper focuses on a model order reduction (MOR) for large-scale rotordynamic systems by using finite element discretization. Typical rotor-bearing systems consist of a rotor, built-on parts, and a support system. These systems require careful consideration in their dynamic analysis modeling because they include unsymmetrical stiffness, localized nonproportional damping, and frequency-dependent gyroscopic effects. Because of this complex geometry, the finite element model under consideration may have a very large number of degrees of freedom. Thus, the repeated dynamic analyses used to investigate the critical speeds, stability, and unbalanced response are computationally very expensive to complete within a practical design cycle. In this study, we demonstrate that a Krylov subspace-based MOR via moment matching significantly speeds up the rotordynamic analyses needed to check the whirling frequencies and critical speeds of large rotor systems. This approach is very efficient, because it is possible to repeat the dynamic simulation with the help of a reduced system by changing the operating rotational speed, which can be preserved as a parameter in the process of model reduction. Two examples of rotordynamic systems show that the suggested MOR provides a significant reduction in computational cost for a Campbell diagram analysis, while maintaining accuracy comparable to that of the original systems.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.89-98
• /
• 2013

In recent years steel-concrete composite shear walls have been widely used in enormous high-rise buildings. Due to high strength and ductility, enhanced stiffness, stable cycle characteristics and large energy absorption, such walls can be adopted in the auxiliary building; surrounding the reactor containment structure of nuclear power plants to resist lateral forces induced by heavy winds and severe earthquakes. This paper demonstrates a set of nonlinear numerical studies on I-shaped composite steel-concrete shear walls of the nuclear power plants subjected to reverse cyclic loading. A three-dimensional finite element model is developed using ABAQUS by emphasizing on constitutive material modeling and element type to represent the real physical behavior of complex shear wall structures. The analysis escalates with parametric variation in steel thickness sandwiching the stipulated amount of concrete panels. Modeling details of structural components, contact conditions between steel and concrete, associated boundary conditions and constitutive relationships for the cyclic loading are explained. Later, the load versus displacement curves, peak load and ultimate strength values, hysteretic characteristics and deflection profiles are verified with experimental data. The convergence of the numerical outcomes has been discussed to conclude the remarks.

• 전산구조공학
• /
• 제11권1호
• /
• pp.171-178
• /
• 1998

점탄성감쇠기가 장치된 건물은 감쇠력과 강성이 증가하며 부가되는 감쇠력에 의하여 비고전적 감쇠시스템이 된다. 이러한 경우 비감쇠시스템에서 구한 고유값을 이용하여 감쇠행렬을 대각행렬로 변환할 수 없으므로 일반적으로 운동방정식을 2n크기 행렬의 1차 미분방정식 형태로 변환하여 해석하게 된다. 이러한 방법은 일반적인 고전적 감쇠시스템에 비해 복잡하므로 감쇠행렬의 비대각항을 무시하고 해석하는 방법이 이용되기도 한다. 본 논문에서는 이러한 근사적인 방법의 타당성과 이론적 근거를 검증하고 정해와 근사해법을 이용하여 3층 전단건물의 진동특성을 구하여 비교하였다. 결과에 따르면 부가되는 감쇠력이 작을 때는 근사해와 정해가 매우 근접하나 감쇠력이 커질수록 그 오차가 커지는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.151-156
• /
• 2007

Topology optimization has been widely used in many research areas due to its ability in providing intial designs for the problems with complex boundary conditions. This also has been useful in compliant mechanisms, but resulting layouts may not be immediately manufacturable because they usually consist of members with varying widths and shapes. Also, there occurs some numerical difficulties such as checkerboards or hinge patterns which result from 1-node connection, and intermediate values which make the manufacturing of the designed structure difficult. Though there are many remedies given to avoid this problems, they cannot be prevented. One may avoid this difficulty by employing uniform ground beams and explicit hinge joints. The proposed method is to connect uniform ground beams with elastic short-beam hinge joints. By choosing the widths of short beams as design variables, dominant deformations can occur mainly by flexible joints having intermediate widths. Unlike the conventional methods used for compliance minimization, intermediate widths must appear in compliant mechanism design problems. Also, the present approach does not encounter the problem of one-point hinges.

• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.469-476
• /
• 2007

많은 계산량이 요구되는 삼차원 접촉 문제의 효율적인 유한요소 해석을 위하여 영역/경계 분할 기법을 적용하였다. 접촉 경계면의 부등식 적합 조건과 부영역, 공유면, 접촉 공유면의 등식 적합 조건을 모두 벌칙 함수로 처리하였다. 이에 따라 모든 유효 강성 행렬이 양 정치화되므로, 역행렬과 같은 각종 행렬 연산이 매우 간편해진다. 또한 전체 영역의 형상이 복잡하더라도, 임의의 부영역, 공유면, 접촉 공유면 단위로 쉽게 유한요소 모델링할 수 있다. 즉, 관련 지배 방정식은 물론 경계 조건도 독립적으로 이산화할 수 있으므로, 국부적인 비선형 접촉 조건에 대한 효율적인 해석이 가능하다. 간단한 수치 예제를 통하여 삼차원 접촉 해석의 효율성에 관한 기본적인 경향을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.50-58
• /
• 1996

The torsional vibration of the propulsion shafting system equipped with viscous damper is investigated. The equivalent system is modeled by a two mass softening system with Duffing's oscillator and the vibratory motion is described by non-linear differential equations of second order. The damper casing is fixed at the front-end of crankshaft and the damper's inertia ring floats in viscous silicon fluid inside of the camper casing. The excitation frenquency is proportional to the rotational speed of engine. The steady state response of the equivalent system is analyzed by the computer and for this analyzing, the harmonic balance method is adopted as a non-linear vibration analysis technique. Frequency response curves are obtained for 1st order resonance only. Jump phenomena are explained. The discriminant for the solutions of the steady state response is derived. Both theoretical and measured results of the propulsion shafting system are compared with and evaluated. As a result of comparisions with both data, it was confirmed that Duffing's oscillator can be used in the modeling of the propulsion shafting system attached with viscous damper with non-linear stiffness.