• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.669-677
• /
• 2018

Torrential rain and drought are repeated due to the increase in the unpredictable fluctuating of rainfall patterns. It is time for stabilize water resource management in terms of disaster prevention. Distributed control from sources is needed to minimize damages caused by torrential rains and droughts. Rain barrel can be used to reduce the runoff as they collect and store rainwater. In response to this situation, Seoul Metropolitan Government and other local governments implemented a project to support the installation of rain barrel and provided 90% of the cost of installing it in private areas. However, with limited budget, it is difficult to distribute rainwater to the city which is mostly covered by private areas. In this study, Samho-dong, Ulsan, where pilot projects of water cycle leading city are underway, analyzed the effects of reducing the runoff with respect to the amount of rainwater that can be used, and analyzed the economics of recoverable investment cost when installed. From the analysis, it was established that it is possible to show sufficient efficiency with a small capacity without the need to install large rain barrel effectively in the private sector, and to support the installation cost of less than 70 percent of the rainwater can be recovered.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.516-520
• /
• 2010

As the substantial increase in battlefield density, multiple and complex weapon system, Ensuring the Survivability of the platform has been emphasized. Most of platforms have equipped with ASE (Aircraft Survivability Equipment) system in order to take action against at modernized hostile weapon under current battlefield. ASE system enhance the survivability of the platform through providing accurate situation awareness information by detecting and countermeasuring hostile threats. One of Key factor of the AE system performance is handling multiple and complex threats. Multiple and complex threat emulation is an effective means of ASE system verification In this study, It discuss system verification method before installation by dealing with complex threat situation consists of individual threat.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.4
• /
• pp.51-56
• /
• 2022

Purpose: By applying an ultrasonic mechanical device to the liquid fertilizer storage in the pig dropping treatment plant, the initial odor of the odor source is reduced, and the air dilution drainage of the complex odor is fundamentally recognized to facilitate odor treatment on the mechanical and chemical biological treatment devices at the rear. Research design, data and methodology: The odor concentration on the site boundary was measured to confirm the state of reduction. In order to prevent the spread of odor from the collection of the pig dropping treatment plant, it was measured by installing an ultrasonic generator inside the installation wall after installing the sealing wall. Results: The average value of the March and April measurement data remained close to neutral at 8.2 after 8.6 treatment before pH treatment, decreased 97.3% from 462 mg/L before SS treatment to 10.5 mg/L after treatment, and the composite odor was reduced by 85% from 20 to 3 before treatment. It was confirmed that ammonia (NH3) was reduced by 99% from 5.8 ppm to 0.09 ppm, and general bacteria were also reduced by 99% from 3,200 CFU/mL to 57 CFU/mL Conclusion: Applying the ultrasonic air ejector hybrid system and zigzag air complex module development product to resource circulation centers or sewage treatment facilities is thought to reduce inconvenience to residents due to odors caused.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.755-764
• /
• 2011

At the present, planning and installation of parking space sections and lane width are implemented in accordance with the installation standard and parking lot structure by the enforcement regulations of the Parking Act. While large and RV (Recreational Vehicle) vehicles have increased in number recently, parking is complex with improper installation standards. It causes serious problems, including vehicle vandalism, increased civil complaints, travel inconveniences for parking lot users, management and maintenance issues for parking lots, and so forth. The study, therefore, determined that the practical and appropriate realignment of parking unit adjustment and lane width regulations are essential. The study conducted prior review on domestic parking sections and change cases of composition by vehicle types, including the component ratio of domestic and foreign vehicles, width of vehicle by types in order to examine the parking problems that account for a increasing social issues, and provided parking plan methods by types of vehicle, as well as reform and reaction plans for parking unit adjustment and lane width considering security and smooth traffic flow. After comparing and analyzing between estimated installation of parking space and lane width and internal and external cases, the study suggests the improvement that considers expenses and convenience of a driver. Also, it shows installation of parking space that considers traffic safety, improvement of lane width, and parking way depends on vehicle types. By providing estimation for parking planning and parking planning methods that secure safe and smooth traffic flow within a parking lot, the study will contribute to the development of improved alternatives for cost-effective traffic safety and set-up structure, including installation standards of parking lots.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.465-468
• /
• 2014

The image processing device sold by the market, which increases the comfort of the driver Around-View of the camera. This system while driving or when parked, came about to prevent accidents caused by driver error or disable the visibility of the system. However, it did not spread widely to the driver due to the problem of the high installation cost and complex installation process from the system for easy operation. Due to problems such as first, expensive equipment and second, the development environment is difficult and third, inconvenient installation process, it is not out because of the prohibitively high cost burden and difficult development environment, programmers and operators. I think if this is solved even one problem of this system would be able to access the user are a little more affordable. In this paper The AVM(Around-View Monitoring) system is proposed, the two problems that minimize expensive equipment, the installation process is inconvenient problem of the three aforementioned systems. Solved the problem caused by a lot of the cost by using low-cost USB device, and a rear camera. Was developed to facilitate the installation is possible by considering the inconvenient installation. Reducing the price paid by consumers because of the system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.34-43
• /
• 2012

This paper describes system modeling and controller design method in the measured signal by discrete Fourier transform. Transfer function of the second order system is estimated by the dominant parameter which is computed in the magnitude and the phase of Fourier spectrum of the measured signal. In addition, the controller was designed by the estimated transfer function, and the results were compared. The proposed estimation method of transfer function contains only a very simple mathematical process. Therefore, it is effective to design the controller in the measured signal when the output of the system contains the characteristics of complex exponential functions case. The proposed method was applied on Op-Amp system to verify the efficiency and the reliability. The results show that the proposed algorithms are highly applicable to the system modeling and controller design in the measured data.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.1-10
• /
• 2016

A system which provides multispectral near-IR and visible gray images of objects is constructed and an algorithm is derived to acquire a natural color image of objects from the gray images. A color image of 24 color patches is obtained by recovering their CIE (International Commission on Illumination) LAB color coordinates $L^*$, $a^*$, $b^*$ from their gray images using the algorithm based on polynomial regression. The system is composed of a custom-designed LED illuminator emitting multispectral near-IR illuminations, fluorescent lamps and a monochrome digital camera. Color reproducibility of the algorithm is estimated in CIELAB color difference ${\Delta}E^*_{ab}$. And as a result, if yellow and magenta color patches with around 10 ${\Delta}E^*_{ab}$ are disregarded, the average ${\Delta}E^*_{ab}$ is 2.9, and this value is within the acceptability tolerance for quality evaluation for digital color complex image.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.50-55
• /
• 2011

This research is to apply the adaptive control of neuron networks for the real-time attitude control of Multi-articulated robot. Multi-articulated robot is expressed with a complicated mathematical model on account of the mechanic, electric non-linearity which each articulation of mechanism has, and includes an unstable factor in time of attitude control. If such a complex expression is included in control operation, it leads to the disadvantage that operation time is lengthened. Thus, if the rapid change of the load or the disturbance is given, it is difficult to fulfill the control of desired performance. In this research we used the response property curve of the robot instead of the activation function of neural network algorithms, so the adaptive control system of neural networks constructed without the information of modeling can perform a real-time control. The proposed adaptive control algorithm generated control signs corresponding to the non-linearity of Multi-articulated robot, which could generate desired motion in real time.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.22-28
• /
• 2005

The electrical characterstic of earth is the most dominant factor for grounding design and an earth is typically represented by a uniform medium with the specific earth resistivity, which is unique for a specific site. For a hand-working grounding design using a specific earth resistivity requires a process converting a real earth of complex medium into a simple uniform medium In this paper, we suggest a procedure to convert a multi-layered earth s into a simpler uniform earth for grounding design of Myanmar 500[kV] transmission towers.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.4
• /
• pp.344-351
• /
• 2015

Recently, an ERP (Enterprise resource Planning) system has been becoming an essential S/W tool for companies to manage their business processes and manufacturing resources. As the information exchange becomes more complex, not only corporate companies but also small- and mid- sized enterprises (SMEs) are required to build an ERP system. However, for small- and middle- sized companies, the adoption of ERP systems becomes challenging due to high cost and long installation time of the system. This paper presents a novel concept of an adaptive ERP system incorporating the ontology structure of the business supply chain information. The proposed ERP installation methodology is illustrated with an example of a door-trim manufacturing company in the automotive supply chain.