• ETRI Journal
• /
• 제44권2호
• /
• pp.274-285
• /
• 2022

Retransmission in optical burst switching networks is a solution to recover data loss by retransmitting the dropped burst. The ingress node temporarily stores a copy of the complete burst and sends it each time it receives a retransmission request from the core node. Some retransmission schemes have been suggested, but uncontrolled retransmission often increases the network load, consumes more bandwidth, and consequently, increases the probability of contention. Controlled retransmission is therefore essential. This paper proposes a new controlled retransmission scheme for loss recovery, where the available bandwidth of wavelength channels and the burst lifetime are referred to as network conditions to determine whether to transmit a dropped burst. A retrial queue-based analysis model is also constructed to validate the proposed retransmission scheme. The simulation and analysis results show that the controlled retransmission scheme is more efficient than the previously suggested schemes regarding byte loss probability, successful retransmission rate, and network throughput.

• 대한전자공학회논문지
• /
• 제14권6호
• /
• pp.10-15
• /
• 1977

This paper proposes a simple and systematic method for the generation of the fault detection test sets for the combinational logic networks. Based on tile path sensitizing concept, the test patterns for the primary input gates of the network are defined, and then it is shown that, arranging these predefined test patterns according to the path sensitizing characteristics of the given network sturctures, the minimal complete test sets for the fan-out free combinational networks can be found easily. It is also shown that, taking into account the fan-out paths sensitizing compatibility, the proposed method can be extended to the irredundant reconvergent fan-out networks.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.570-573
• /
• 1996

The evaluation test for the operation of rotary type surface mounters which consist of the reel axis, the index table and the X-Y table, has been performed by comparing the new method with the old one in only fields. Because the problem seeking for the optimal operation of rotary type surface mounters, is NP complete, it is almost impossible to get the optimal solutions of large problems. This paper deals with a dynamic network modeling, which can reduce the effort, the cost, and the time used for the performance test of rotary type surface mounters.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.45-51
• /
• 1995

A novel definition for fuzzy mathematical morphology is described The generalized-mean operator plays the key role for this definition. Several hard constraints for standard generalized-mean have been eliminated. Complete mathematical description for obtaining fuzzy erosion and dilation is provided. The definitions are well suited for neural network implementation. Therefore, the parameters for the fuzzy definition can be optimized using neural network learning paradigm.

• International Journal of Computer Science & Network Security
• /
• 제22권8호
• /
• pp.413-419
• /
• 2022

To have a complete and comprehensive understanding of the research subject and to form an integrated legal framework for it, I have sought comprehensively to cover the major written literature on the issue under consideration. I also benefitted from a wide range of research and academic studies pertaining to the same topic, although that literature did not specifically address the issue of consumer rights in electronic contracting in the Saudi e-commerce system. Rather, it addressed only the civil and criminal protection of the consumer in e-commerce.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.177-178
• /
• 2005

Wireless 1394 over IEEE802.15.3 must allow a data reserved for delivery over a wired 1394 network to be delivered over an IEEE802.15.3 wireless network through bridging IEEE 1394 to IEEE802.15.3. Isochronous transfers on the 1394 bus guarantee timely delivery of data. Specifically, isochronous transfers are scheduled by the bus so that they occur once every $125\;{\mu}s$ and require clock time synchronization to complete the real-time data transfer. IEEE1394.1 and Protocol Adaptation Layer for IEEE1394 over IEEE802.15.3 specify clock time synchronization for a wired 1394 bus network to a wired 1394 bus network and wireless 1394 nodes, which are IEEE802.15.3 nodes handling 1394 applications, over IEEE802.15.3. Thus, the clock time synchronizations are just defined within a homogeneous network environment like IEEE1394 or IEEE802.15.3 until now. This paper proposes new clock time synchronization method for wireless 1394 heterogeneous networks between 1394 and 802.15.3. If new method is adopted for various wireless 1394 products, consumer electronics devices such as DTV and Set-top Box or PC devices on a 1394 bus network can transmit real time data to the AV devices on the other 1394 bus in a different place via IEEE 802.15.3.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.573-578
• /
• 2010

Topological matrix which reflects characteristics of network connectivity has been widely used in efficient solving for complicated flow network. Using topological matrix, one can easily define continuity at each node of flow network and make algorithm to automatically generate continuity equation of matrix form. In order to analyze flow network completely it is required to satisfy energy conservation in closed loops of flow network. Fundamental cycle retrieving algorithm based on graph theory automatically constructs energy conservation equation in closed loops. However, it is often accompanied by NP-complete problem. In addition, it always needs fundamental cycle retrieving procedure for every structural change of flow network. This paper proposes alternative mathematical method to analyze flow network without fundamental cycle retrieving algorithm. Consequently, the new mathematical method is expected to reduce solving time and prevent error occurrence by means of simplifying flow network analysis procedure.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.65-72
• /
• 2016

Network virtualization is an emerging technology for solving the rigidity of the physical network infrastructure. The innovative technique virtualizes all resources in the network, including the network links and nodes, and provides a number of virtual networks on a single network infrastructure. In order to realize a virtual network, a thorough and complete monitoring of all resources in the network should be performed firstly. OpenFlow is an open source stack for network virtualization. However, it is impossible to apply OpenFlow to AP-based legacy wireless LAN environment because OpenFlow targets ethernet-based LAN environment. In this paper, we implement an adaptor-styled virtual switch for AP-based wireless LAN through customizing the Open vSwitch which is a virtual switch of OpenFlow. The evaluation test results show that the implemented OpenFlow stack operates successfully. The implemented OpenFlow stack can now be plugged immediately in existing AP-based wireless LAN environment and plays network resource monitoring. In the future, we can develop wireless LAN virtualization applications on the wireless OpenFlow stack.

• 한국통신학회논문지
• /
• 제33권3C호
• /
• pp.219-233
• /
• 2008

스케줄링의 목적은 입력 작업(DAG)에 대한 스케줄 결과 길이를 최소화하는 것이다. 이런 스케줄링 문제는 잘 알려진 '정해진 시간 내에 해결하기 어려운 문제(NP-complete)'이며 최적의 스케줄링 결과 값을 얻기 위해서는 휴리스틱으로 해결해야 한다. 선후 관계의 제약을 갖는 노드들의 스케줄링을 효율적으로 수행하기 위해 부모 노드와 이질 프로세서에 대한 정보를 고려하는 TANH(the Task duplication based scheduling Algorithm for Network of Heterogeneous systems), GDL, BIL, TDS과 같은 많은 알고리즘이 제안되었다. 본 논문은 기존의 TANH 스케줄링에서 나타나는 여러 개의 부모 노드와 이질 프로세서에 대한 다양한 경우를 충분히 고려하지 못한 점을 보안하여 향상된 스케줄링을 수행할 수 있는 DTSC (Duplication based Task Scheduling with Communication Cost in Heterogeneous Systems)알고리즘을 제안하였다. 제안된 알고리즘의 성능은 기존 TANH, GDL 알고리즘과 비교하였으며, 스케줄링의 성능 향상을 보여 주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1054-1058
• /
• 1995

There have been many research works for the indirect cutting force measurement in machining process, which deal with the case of one-axis cutting process. In multi-axis cutting process, the main difficulties to estimate the cutting forces occur when the feed direction is reversed. This paper presents the indirect cutting force measurement method in contour NC milling processes by using current signals of servo motors. An artificial neural network (ANN) system are suggested. An artificial neural network(ANN) system is also implemented with a training set of experimental cutting data to measure cutting force indirectly. The input variables of the ANN system are the motor currents and the feedrates of x and y-axis servo motors, and output variable is the cutting force of each axis. A series of experimental works on the circular interpolated contour milling process with the path of a complete circle has been performed. It is concluded that by comparing the ANN system with a dynamometer measuring cutting force directil, the ANN system has a good performance.