• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1568-1572
• /
• 2002

A 152 day trial was conducted to see the effect of feeding naturally fermented wheat straw (FWS) with either energy, protein or energy protein supplements on the growth of buffalo calves. Twenty four male buffalo calves (10-12 months old) divided in 6 equal groups were individually offered FWS as sole roughage along with either conventional concentrate mixture (conc), maize grains (M), solvent extracted mustard cake (DMC), M-DMC mixture (50:50), deoiled rice bran (DRB) or uromol bran mixture (UBM) in 70:30 ratio. The digestibility of nutrients, nitrogen retention and nutritive value was maximum in FWS:UBM followed by FWS:DMC and FWS:Conc groups. Almost, all the blood parameters were observed well within the normal range except that of blood urea (FWS:UBM) and creatinine (FWS:DMC and FWS:DRB). The dietary combination in which FWS was supplemented with only conventional protein supplement like DMC proved to be highly efficient as far as live weight gain was concerned. FWS supplemented with energy-protein combination i.e. MDMC could also be used as complete feed for growing calves in comparison to conventional feeding system.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.283-288
• /
• 2020

This study investigated the purification process of groundwater contaminated with zinc and arsenic using a permeable reactive barrier with a zero-valent iron/pumice mixture. We determined the removal rates of the contaminants for 30 days. In this study, column reactor filled with the zero-valent iron/pumice reactive mixture was used. Experimental results showed that the mixture exhibited an almost complete removal of the zinc and arsenic ions. Arsenic was removed via co-precipitation and adsorption processes while zinc ions were asorbed in active sites.The purification process of water from the metal ionscontinued for 30 days with constant hydraulic conductivity because of the enhanced porosity of the pumice and interparticle distance between the zero-valent iron and pumice. Contaminants removal rates and the remediation mechanism for each reactive system are described in this paper.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2675-2685
• /
• 1994

A study has been conducted to provide the experimental information for the velocity and temperature profiles of steam-air mixutre and to investigate their roles on the film condensation with wavy interface. Saturated gas mixture of steam-air was made to flow through the nearly horizontal$(4.1^{\circ})$ square duct of 0.1m width and 1.56m length at atmospheric pressure, and was condensated on the bottom cold plate. The air mass fraction in the gas mixture was changed from zero(W =0, pure steam) to one(W =1, pure air), and the bulk velocity was varied from 2 to 4 m/s. Water film was injected concurrently to investigate the effect of wavy interface on the condensation. The velocity and temperature profiles were measured by LDA system and thermocouples along the three parameters ; air mass fraction, mixture velocity and film flow rate. The profiles moved toward the interface with increasing steam mass fraction, mixture velocity and film flow rate. The Prandtl and Schmidt numbers were near one in the present experimental range, however there was no complete similarity between the velocity and temperature profiles of gas mixture. And the heat transfer characteristics and interfacial structure were coupled with each other.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.703-708
• /
• 2004

The variation of the reaction pressure and reaction product during the reaction was investigated according to the total mass of the reaction mixture at the optimum composition for the preparation of u-Si3N4 powder which had been confirmed in the former investigation; 'Preparation of $\alpha$-Si$_3$N$_4$ powder in reaction system containing molten salt by SHS - part 1. synthesizing of powder'. When the total mass of the reaction mixture was 100g, the minimum pressure for a complete reaction was 60atm in 5L reactor, whereas the reaction was incomplete in the case that the mass exceeded 200g because of pressure increase. Also, as the mass of the reaction mixture increased, the reactivity linearly decreased. Hence, the complete reaction was realized by decreasing an initial $N_2$ pressure, and thus obtained minimum initial pressure was recorded 20 atm for the initial mixture of 500g. The reason of the incomplete reaction with pressure Increase was found to be that NH$_4$Cl vapour which was suppressed by the gas pressure acted as a diluent.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.199-203
• /
• 2016

An enzyme-free optical method is proposed for estimating high concentrations of glucose in a glucose-lactose mixture, based on a predictive equation that takes advantage of the reflective optical power observed at two discrete wavelengths. Compared to the conventional absorption spectroscopy method based on Beer's Law, which is mainly valid for concentrations below hundreds of mg/dL, the proposed scheme, which relies on reflection signals, can be applied to measure higher glucose concentrations, of even several g/dL in a glucose-lactose mixture. Two probe wavelengths of 1160 and 1300 nm were selected to provide a linear relationship between the reflective power and pure glucose/lactose concentration, where the relevant linear coefficients were derived to complete the predictive equation. Glucose concentrations from 2 to 7 g/dL in a glucose-lactose mixture were efficiently estimated, using the established predictive equation based on monitored reflective powers. The standard error of prediction was 1.17 g/dL.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.79-84
• /
• 2002

The catalytic heat exchanger was designed which employs the regenerative preheating system of combustion air. The characteristics of the catalytic heat exchanger have been experimentally studied at the various operating parameters. The results showed that the mixture velocity did not affect significantly the performance of catalytic combustor whereas the preheating temperature of combustion air affected significantly the conversion rate. The complete conversion was achieved in the catalyzed honeycomb at a preheating temperature of $370-390^{\circ}C$, a mixture velocity of 0.53 $^{\sim}$ 0.75 m/s and an equivalence ratio of 0.19 $^{\sim}$ 0.27. The heat exchange efficiency of the catalytic heat exchanger appeared to be about 75 % when the air of room temperature was used as a working fluid. The results showed that both the heat balance of the system and the mixture conditions determine its stable catalytic combustion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1538-1546
• /
• 1998

The aim of this study is to investigate the characteristics of the catalytic burner to bum LPG and toluene alternately which can be applied to the dryer of an acryl coating process of textile. It was difficult to obtain complete conversion when the catalytic burner was installed to downward direction. The catalytic burner was improved by introducing the forced diffusion combustion air and the premixing air. The optimal operating conditions for the newly improved catalytic burner were obtained. The catalytic burner for toluene mixture was also investigated to incinerate toluene mixture exhausted from drying process. Results showed that the catalytic burner could oxidize toluene mixture completely at the proper operating conditions. Finally, the catalytic burner to bum LPG and toluene alternately was applied to the dryer of acryl coating. By using the catalytic burner, benefits of energy savings and environmental protection were obtained.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.3
• /
• pp.357-362
• /
• 2011

Complete mixture preparation of reactants prior to catalytic reforming is an enormously important step for successful operation of a fuel reformer. Incomplete mixing between fuel and reforming agents such as air and steam can cause temperature overshoot and deposit formation which can lead the failure of operation. For that purpose it is required to apply computational models describing coupled kinetics and transport phenomena in the mixing region, which are computationally expensive. Therefore, it is advantageous to analyze the gas-phase reaction kinetics prior to application of the coupled model. This study suggests one of the important design constraints, the required residence time in the mixing chamber to avoid substantial gas-phase reactions which can lead serious deposit formation on the downstream catalyst. The reactivity of various gaseous and liquid fuels were compared, then liquid fuels are far more reactive than gaseous fuels. n-Octane was used as a surrogate among the various hydrocarbons, which is one of the traditional liquid fuel surrogates. The conversion was slighted effected by reactants composition described by O/C and S/C. Finally, threshold residence times in the mixing region of a hydrocarbon reformer were studied and the mixing chamber is required to be designed to make complete mixture of reactants by tens of milliseconds at the temperature lower than $400^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• v.38 no.4
• /
• pp.227-233
• /
• 2013

Objectives: The purpose of the study was to evaluate human dental pulp response to pulpotomy with calcium hydroxide (CH), mineral trioxide aggregate (MTA), and calcium enriched mixture (CEM) cement. Materials and Methods: A total of nine erupted third molars were randomly assigned to each pulpotomy group. The same clinician performed full pulpotomies and coronal restorations. The patients were followed clinically for six months; the teeth were then extracted and prepared for histological assessments. The samples were blindly assessed by an independent observer for pulp vitality, pulp inflammation, and calcified bridge formation. Results: All patients were free of clinical signs/symptoms of pulpal/periradicular diseases during the follow up period. In CH group, one tooth had necrotic radicular pulp; other two teeth in this group had vital uninflamed pulps with complete dentinal bridge formation. In CEM cement and MTA groups all teeth had vital uninflamed radicular pulps. A complete dentinal bridge was formed beneath CEM cement and MTA in all roots. Odontoblast-like cells were present beneath CEM cement and MTA in all samples. Conclusions: This study revealed that CEM cement and MTA were reliable endodontic biomaterials in full pulpotomy treatment. In contrast, the human dental pulp response to CH might be unpredictable.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1307-1311
• /
• 2002

Twelve dietary combinations were prepared using 70 parts of fermented wheat straw (FWS) as the sole roughage supplemented with 30 parts of either the low protein concentrate mixture (Conc.-I), high protein concentrate mixture (conc.-II), maize grains (M), solvent extracted mustard cake (DMC), deoiled rice bran (DRB), uromol bran mixture (UBM), deep stacked poultry litter (DSPL), dried poultry droppings (DPD), M-DMC mixture (50:50), M-UBM mixture (50:50), M-DPD mixture (50:50) or M-UBM-DPD mixture (50:25:25) and evaluated by in-sacco technique. The above dietary combinations were also evaluated by changing the roughage to concentrate ratio to 60:40. The digestion kinetics for DM and CP revealed that FWS:DPD had the highest, whereas, the FWS:M-DMC had the lowest rapidly soluble fraction. The potentially degradable fraction was found to be maximum in FWS:M and minimum in FWS:DPD dietary combinations. The higher degradation rate of FWS:DRB and FWS:UBM combinations was responsible for their significantly (p<0.05) higher effective degradability as compared to other combinations. The highest undegradable fraction noted in FWS:M-UBM-DPD followed by FWS:DMC was responsible for high rumen fill values. The FWS:DRB, FWS:UBM and FWS:DPD combinations had higher potential for DM intake. The dietary combination with higher concentrate level (60:40) was responsible for higher potentially degradable fraction, which was degraded at a faster rate resulting in significantly higher effective degradability as compared to the corresponding dietary combination with low concentrate level (70:30). The low undegradable fraction in the high concentrate diet was responsible for low rumen fill values, which predicted of high potential for DM intake. Out of 24 dietary combinations, FWS with either of UBM, DRB, DMC, Maize, M-DMC or DPD in 70:30 ratio supplemented with minerals and vitamin A in comparison to conventional feeding practice (roughage and concentrate mixture) could be exploited as complete feed for different categories of ruminants.