• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.223-224
• /
• 2000

As technology level of TFT-LCD advances, application to TV becomes an emerging important area for LCD makers. In this paper, we review current LCD technology level to be used in TV such as liquid crystal response behavior, color accuracy, contrast ratio, brightness and panel size. Based on the understanding of current limitations in LCD compared with CRT, the improvement plan to render 'near perfect motion picture' reproduction with LCD is proposed. Digital TV is a great opportunity for digital LCD panels, but we have to solve remaining technical and cost issue in order to be competitive with other large size TV technologies such as PDP, CRT or projection type. In preparing the upcoming digital TV era with advanced TFT-LCD, the hurdles and prospect of larger size LCD-TV panels will be discussed.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.63-75
• /
• 2015

The CMOS power amplifier (PA) is a promising solution for highly-integrated transmitters in a single chip. However, the implementation of PAs using the CMOS process is a major challenge because of the inferior characteristics of CMOS devices. This paper focuses on improvements to the efficiency and linearity of CMOS PAs for modern wireless communication systems incorporating high peak-to-average ratio signals. Additionally, an envelope tracking supply modulator is applied to the CMOS PA for further performance improvement. The first approach is enhancing the efficiency by waveform engineering. In the second approach, linearization using adaptive bias circuit and harmonic control for wideband signals is performed. In the third approach, a CMOS PA with dynamic auxiliary circuits is employed in an optimized envelope tracking (ET) operation. Using the proposed techniques, a fully integrated CMOS ET PA achieves competitive performance, suitable for employment in a real system.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.257-262
• /
• 2002

The hydroxyapatite(HAp) for the present study was prepared with the wastewater sludge from semiconductor fabrication process and it was crystallized in an electric furnace for 30 min at 90$0^{\circ}C$. The adsorption characteristics of HAp for phosphate ion in aqueous solution has been investigated. The adsorbed ratio of phosphate ion for HAp were investigated according to the reaction time, amount of HAp, concentration of standard solution, pH of solution, and influence of concomitant ions. The amount of adsorbed phosphate ion decreased with the increase of pH due to the mutual electrostatic repulsion between adsorbed phosphate ions and competitive adsorption between phosphate ion and OH- ion in aqueous solution. The maxium amount of the adsorption equilibrium for phosphate ion was about 24 mg/g of HAp. The HAp would likely to be a possible adsorbent for the removal of phosphate ion in the waste water.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.318-320
• /
• 2013

The spherical bead manufactured by rapidly cooling process shows high density of 3.64g/㎤, high unit volume weight of 2.6kg/l, and high solid volume of 71%. When it applies to the grouter, it is possible to obtain even high fluidity with only a small amount. This study, focusing the grouter using a rapidly-cooled electric arc furnace oxidizing slag(RC-EAFS), deals with the properties of flow and setting time in fresh state, compressive strength and length variation at 1, 3, 7 and 28 curing day in hardened state. As the results, even though the grouter with RC-EAFS shows comparative low strength, it will be possible to development the competitive product due to the properties of increasing flow and low cost.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.137-141
• /
• 2022

To inspect the power facility faults using artificial intelligence, it need that improve the accuracy of the diagnostic model are required. Data augmentation skill using generative adversarial network (GAN) is one of the best ways to improve deep learning performance. GAN model can create realistic-looking fake images using two competitive learning networks such as discriminator and generator. In this study, we intend to verify the effectiveness of virtual data generation technology by including the fake image of power facility generated through GAN in the deep learning training set. The GAN-based fake image was created for damage of LP insulator, and ResNet based normal and defect classification model was developed to verify the effect. Through this, we analyzed the model accuracy according to the ratio of normal and defective training data.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.8 no.2
• /
• pp.81-88
• /
• 1979

The performance of air type solar heating system has been investigated for a system which has been operating continuously for two years. Design factors of a collector, such as the effective transmittance-absorptance and heat transfer factor were also determined experimentally. The flat plate collector is fabricated from steel sheet metal with two sealed glass covers. Solar heat is stored in a pebble bed of primarily granitic rock approximately 20-40 mm in diameter. The system is controled by automatically driven motors and dampers. The ratio of useful collected solar heat divided by the total solar radiation on the collector dropped was the range of 35 to 42 percent in monthly average. As it result, the air system was found fairly competitive with the water system, however, the heat supply from storage was limited because of using the pebble as the heat storage media.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.622-628
• /
• 2010

In this study, Solid-phase microextraction (SPME) with GC/FID was studied as a possible alternative to liquid-liquid extraction for the analysis of BTEX and MTBE. Experimental parameters affecting the SPME process (such as kind of fibers, adsorption time, desorption time, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. Experimental parameters such as CAR/PDMS, adsorption time of 20 min, desorption time of 5 min at $250^{\circ}C$, headspace volume of 50 mL, sodium chloride (NaCl) concentration of 25% combined with magnetic stirring were selected in optimal experimental conditions for analysis of BTEX and MTBE. The general affinity of analytes to CAR/PDMS fiber was high in the order p-Xylene>Toluene>Ethylbenzene>MTBE>Benzene. The linearity of $R^2$ for BTEX and MTBE was from 0.970 to 0.999 when analyte concentration ranges from $30{\mu}g/L$ to $500{\mu}g/L$, respectively. The relative standard deviation (% RSD) were from 2.5% to 3.2% for concentration of $100{\mu}g/L$ (n=5), respectively. Finally, the limited of detection (LOD) observed in our study for BTEX and MTBE were from $7.5{\mu}g/L$ to $15{\mu}g/L$, respectively.

• Applied Biological Chemistry
• /
• v.36 no.1
• /
• pp.7-10
• /
• 1993

ELISA method was applied for the screening of zearalenone producing strains. The developed ELISA was as follow: $125\;{\mu}l$ of diluted solution (1 : 500) of antibody was added to each microtiter well and incubated overnight at $40^{\circ}C$. For direct competitive ELISA, samples and zearalenone-peroxidase conjugate were mixed in a 1 : 1 ratio, and a $100\;{\mu}l$ of aliquot was then added to antisera-coated wells. Plates were incubated for 30 minutes at $37^{\circ}C$, and wells washed 6 times, and $100\;{\mu}l$ of ABTS substrates was added. Plates were incubated for antother 15 minutes at $37^{\circ}C$, and $100\;{\mu}l$ of stopping reagent was added to the wells and absorbance was recorded at 410nm on ELISA Reader. Among 19 strains showed zearalenone-producing ability by ELISA, 3 strains (R-5, C-46, S-134) produced more than 50 ng/ml of zearalenone.

• Asia-Pacific Journal of Business
• /
• v.9 no.2
• /
• pp.105-121
• /
• 2018

In 1995, the WTO started to ease the trade barriers. Globalization has accelerated. The opening of the agricultural products market is rapidly gaining momentum with the conclusion of an FTA. The acceleration of this FTA is expected to be a threat to Korea's agriculture, and a new strategy is needed. At the beginning of the nuclear accident, mainly radioactive materials are found in the surface layer of the soil. Over time, the concentration of the plant gradually increases. After 5 years, it becomes noticeable. In March 2016, it will be five years after the nuclear accident. Radioactive contamination is very likely to occur in agricultural products produced in the Fukushima area at this time. In this period, agricultural products produced in the Fukushima region are expected to generate supply disruptions in Japan, and imports to replace them will increase. Therefore, it is necessary to establish a mid- and long-term strategy for exporting to Japan by analyzing the competitiveness of Korean agricultural products. In this study, standardization index was derived by using agricultural price ratio, TSI, export CAC. Based on this, we analyzed the competitiveness of each item in the Japanese market. The analysis shows that garlic is the most competitive product in the Japanese market. Also, strawberry, tomato, and cucumber were found to be competitive. On the other hand, Kiwi, pineapple, soybean, onion, potato, etc. As a result of the analysis, the following strategies were proposed for the export of agricultural products with high competitiveness. First, it is necessary to develop technology to suppress deterioration of export transportation quality. Second, continuous supply of local consumption pattern information is required. Third, it is necessary to expand exports by processing fresh food. Fourth, it suggested the establishment of export base and strengthening of support system.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.1
• /
• pp.76-82
• /
• 1994

A competitive indirect enzyme-linked immunosorbent assay(ELISA) was developed to detect and quantify levels of the fungicide metalaxyl in crops. Antiserum against metalaxyl was demonstrated in rabbits immunized with metalaxyl-human serum albumin(HSA) conjugate. Metalaxyl-protein conjugate was prepared by mixed anhydride and peptide coupling method with EDC. In this assay, metalaxyl-ovalbumin(OA) was $coated(8{\mu}g/ml)$ on the microtiter plate, which was incubated for 1 hr at $4^{\circ}C$ or 4 hr at $37^{\circ}C$ with diluted antiserum(1:2,000). The optimum volume ratio of antigen and antibody mixture was 0.5: 1, which was incubated for 1 hr at $20^{\circ}C$. The detection of metalaxyl bound on the surface of wells was determined by the reaction(30 min) of antirabbit Ig G-peroxidase conjugate with its substrate.